实验拓扑

实验需求

现有三个自治系统，需要对R1访问R4的loopback-X数据走向进行精确控制：

R1访问R4的loopback0走R2，通过在R1上修改本地优先级实现

R1访问R4的loopback1走R3，通过在R2上修改MED实现

R1访问R4的loopback2走R2，通过在R4上修改AS-path实现

R1访问R4的loopback3走R3，通过在R3上修改origi属性实现

实验步骤

1.配置IP地址及环回口地址

2.配置OSPF 使全网互通(略)

3.R1访问R4的loopback0走R2，通过在R1上修改本地优先级实现

R1

[R1]ip ip-prefix 2 index 10 permit 4.4.4.1 32
[R1]route-policy c permit node 10
[R1-route-policy]if-match ip-prefix 2
[R1-route-policy]apply local-preference 200
[R1]route-policy c permit node 20
[R1]bgp 100
[R1-bgp]peer 192.168.1.2 route-policy c import

4. R1查看BGP协议路由表

[R1]dis bgp routing-table 

 BGP Local router ID is 192.168.1.1
 Status codes: * - valid, > - best, d - damped,
               h - history,  i - internal, s - suppressed, S - Stale
               Origin : i - IGP, e - EGP, ? - incomplete

 Total Number of Routes: 6
      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   4.4.4.1/32         192.168.1.2                200        0      200 300i
 *                       192.168.2.2                           0      200 300i
 *>   4.4.4.2/32         192.168.1.2                           0      200 300i
 *                       192.168.2.2                           0      200 300i
 *>   4.4.4.3/32         192.168.1.2                           0      200 300i
 *                       192.168.2.2                           0      200 300 30
0 300 300i

5. R1访问R4的loopback1走R3，通过在R2上修改MED实现

R2

[Huawei]ip ip-prefix 3 index 10 permit 4.4.4.2 32
[Huawei]route-policy h permit node 10
[Huawei-route-policy]if-match ip-prefix 3
[Huawei-route-policy]apply cost 100
[Huawei]route-policy h permit node 20
[Huawei]bgp 200
[Huawei-bgp]peer 192.168.1.1 route-policy h export

分析：当路由器学习到多条去往相同目的网段的BGP路由时，在其他条件都相同的情况下，BGP将比较这些路由的MED 属性，越小越优。其实可理解为就是改开销

6. 在R1上查看BGP协议路由表

[R1]dis bgp routing-table

 BGP Local router ID is 192.168.1.1
 Status codes: * - valid, > - best, d - damped,
               h - history,  i - internal, s - suppressed, S - Stale
               Origin : i - IGP, e - EGP, ? - incomplete

 Total Number of Routes: 6
      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   4.4.4.1/32         192.168.1.2                200        0      200 300i
 *                       192.168.2.2                           0      200 300i
 *>   4.4.4.2/32         192.168.2.2                           0      200 300i
 *                       192.168.1.2     100                   0      200 300i
 *>   4.4.4.3/32         192.168.1.2                           0      200 300i
 *                       192.168.2.2                           0      200 300 30
0 300 300i

7. 在R1上检查一下BGP的详细信息表

[R1]dis bgp routing-table 4.4.4.2

 BGP local router ID : 192.168.1.1
 Local AS number : 100
 Paths:   2 available, 1 best, 1 select
 BGP routing table entry information of 4.4.4.2/32:
 From: 192.168.2.2 (192.168.2.2)
 Route Duration: 00h21m07s
 Direct Out-interface: GigabitEthernet0/0/1
 Original nexthop: 192.168.2.2
 Qos information : 0x0
 AS-path 200 300, origin igp, pref-val 0, valid, external, best, select, active,
 pre 255
 Advertised to such 2 peers:
    192.168.1.2
    192.168.2.2
 BGP routing table entry information of 4.4.4.2/32:
 From: 192.168.1.2 (192.168.1.2)
 Route Duration: 00h09m37s
 Direct Out-interface: GigabitEthernet0/0/0
 Original nexthop: 192.168.1.2
 Qos information : 0x0
 AS-path 200 300, origin igp, MED 100, pref-val 0, valid, external, pre 255, not
 preferred for MED
 Not advertised to any peer yet    

 //发现我们修改的MED 值 已生效，在这里可以检查核对。

8. R1访问R4的loopback2走R2，通过在R4上修改AS-path实现

R4

[Huawei]ip ip-prefix s index 10 permit 4.4.4.3 32
[Huawei]route-policy s permit node 10
[Huawei-route-policy]if-match ip-prefix s
[Huawei-route-policy]apply as-path 300 300 300 additive
[Huawei]route-policy s permit node 20
[Huawei]bgp 300
[Huawei-bgp]peer 192.168.200.2 route-policy s export

分析：BGP 优选AS-path 属性最短的路由，我把AS-path 属性变长（增加了AS号）,达到实验需求。

9. R1上查看BGP路由表，发现在表中可以观察到已生效.

[R1]dis bgp routing-table 

 BGP Local router ID is 192.168.1.1
 Status codes: * - valid, > - best, d - damped,
               h - history,  i - internal, s - suppressed, S - Stale
               Origin : i - IGP, e - EGP, ? - incomplete

 Total Number of Routes: 6
      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   4.4.4.1/32         192.168.1.2                200        0      200 300i
 *                       192.168.2.2                           0      200 300i
 *>   4.4.4.2/32         192.168.2.2                           0      200 300i
 *                       192.168.1.2     100                   0      200 300i
 *>   4.4.4.3/32         192.168.1.2                           0      200 300i
 *                       192.168.2.2                           0      200 300 30
0 300 300i

---

10. R1访问R4的loopback3走R3，通过在R3上修改origi属性实现

---

做这道题，首先要搞清楚BGP的Origin属性的优先级

BGP属性 - Origin ；3种Origin属性的优先级为：i>e>Incomplete（？）

Origin的3种属性：

i 表明BGP路由通过network命令注入；
e 表明BGP路由是从EGP学来的，EGP协议在现网中很难见到，但可以通过路由策略将路由的Origin属性修改为e；
？ 即Incomplete表明BGP路由通过其它方式学到路由信息，如使用import命令引入的路由。

---

把loopback3引入BGP 300中，只引入4.4.4.4 的路由，不想产生其他路由条目。

[Huawei]ip ip-prefix huawei permit 4.4.4.4 32
[Huawei]route-policy huawei permit node 10
[Huawei-route-policy]if-match ip-prefix huawei
[Huawei]route-policy huawei permit node 10

[Huawei]bgp 300
[Huawei-bgp]import-route direct route-policy huawei

11. 在AR1上查看BGP路由表，发现学习到的4.4.4.4路由为 ? ,此时只需要到R3上更改Origin属性为IGP 即可

R3

[R3] ip ip-prefix 321 permit 4.4.4.4 32
[R3] route-policy 321 permit node 10
[R3-route-policy]if-match ip-prefix 321
[R3-route-policy]apply origin igp //修改属性
[R3]route-policy 321 permit node 20  

[R3]bgp 200
[R3-bgp]peer 192.168.2.1 route-policy 321 export //出方向

12. R1上查看BGP路由表

[R1]dis bgp routing-table

 BGP Local router ID is 192.168.1.1
 Status codes: * - valid, > - best, d - damped,
               h - history,  i - internal, s - suppressed, S - Stale
               Origin : i - IGP, e - EGP, ? - incomplete

 Total Number of Routes: 8
      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   4.4.4.1/32         192.168.1.2                200        0      200 300i
 *                       192.168.2.2                           0      200 300i
 *>   4.4.4.2/32         192.168.2.2                           0      200 300i
 *                       192.168.1.2     100                   0      200 300i
 *>   4.4.4.3/32         192.168.1.2                           0      200 300i
 *                       192.168.2.2                           0      200 300 30
0 300 300i
 *>   4.4.4.4/32         192.168.2.2                           0      200 300i
 *                       192.168.1.2                           0      200 300?