[源码解析] 深度学习流水线并行 PipeDream(3)--- 转换模型
[源码解析] 深度学习流水线并行 PipeDream(3)--- 转换模型
目录
在前文中，我们介绍了PipeDream的总体架构，Profile阶段和计算分区阶段。本文我们介绍模型转换阶段。
流水线并行其他文章链接如下:
[源码解析] 深度学习流水线并行Gpipe(1)---流水线基本实现
[源码解析] 深度学习流水线并行GPipe (2) ----- 梯度累积
[源码解析] 深度学习流水线并行 GPipe(3) ----重计算
[源码解析] 深度学习流水线并行之PipeDream(1)--- Profile阶段
[源码解析] 深度学习流水线并行 PipeDream(2)--- 计算分区
1.1 改进
模型转换阶段是PipeDream相对于GPipe的一个改进，让我们分析一下。
- GPipe的流水线划分（模型具体层的分配），可以理解为是一个程序运行前的，介于动态和静态之间的一个预处理，对于用户来说不是透明的。
- PipeDream的模型层分配，则是依据profile结果把同一个stage的所有层打包统一生成一个Pytorch模型python文件，也属于预处理。但是无疑比GPipe更方便清晰，用户也可以二次手动调整。
PipeDream 模型转换的基本思路是：
- 从模型文件之中加载模型DAG图进入内存。
- 按照stage对图进行处理，把整体DAG图分离开来。因为在前文中，已经把模型的层分配到了各个Stage之上，所以本阶段就是使用 partition_graph 把每个Stage所包含的层分离出来。
- 对个每个stage的子图来应用模板文件，每个stage子图生成一个python文件。在main函数之中，对于每个子图，将其转换为一个Pytorch Module，就对应着一个python文件。就是说，每一层都是这个 Module 的一个子模块。
- 融合模型，把各个Stage的子图合并起来，生成总体的模型文件。前一部分中，生成了若干module的python文件，都对应了一个subgraph，本节的作用就是把这些子图合并成一个大图，对应到python代码，就是生成一个新python文件，里面把各个subgraph的python 引入，生成一个总module文件。
- 输出一个 init 文件，这样更容易处理。
- 生成相关配置文件，比如数据并行配置文件，模型并行配置文件。
具体如下图：
Model File +-----------+ +-----------+ +------------+ +-----------+ +------------+ +----------+
| Edge 1 | | Edge 2 | | Edge 3 | | Edge 4 | | Edge 5 | | Edge 6 |
+-----------+ +-----------+ +------------+ +-----------+ +------------+ +----------+
+-----------+ +-----------+ +------------+ +-----------+ +------------+
|Node 1 | |Node 2 | | Node 3 | |Node 4 | |Node 5 |
| stage 1 | | stage 1| | stage 2| | stage 2| | stage 3|
+-----+-----+ +------+----+ +--------+---+ +-+---------+ +------+-----+
| | | | |
| | | | |
+---------------------------------------------------------------------------------------------------+
| | | | |
Subgraphs +----+ +----+ | | |
| | | | |
v v v v v
+----+-----+-----+ +----+--------+-+ +-------+-------+
| Subgraph 1 | | Subgraph 2 | | Subgraph 3 |
| | | | | |
| Node 1 | | Node 3 | | Node 5 |
| | | | | |
| Node 2 | | Node 4 | | |
| | | | | |
+-------+--------+ +---------+-----+ +-------+-------+
| | |
| | |
+---------------------------------------------------------------------------------------------------+
| | |
Modules | | |
v v v
+-------+-------+ +-------+-------+ +------+--------+
| | | | | |
| Module 1 | | Module 2 | | Module 3 |
| | | | | |
+-------+-------+ +-------+-------+ +--------+------+
| | |
| | |
+----------------------------------------------------------------------------------------------------+
| | |
Python files | | |
v v v
+-----+------+ +------+------+ +------+------+
| | | | | |
| stage1.py | | stage2.py | | stage3.py |
| | | | | |
+-----+------+ +------+------+ +------+------+
| | |
| | |
| | |
+-------------------------------------------------------+
|
|
v
+--------+--------+
| gnmt.py |
| |
+-----------------+手机如下：
1.2 前文回顾
为了更好的说明，我们要回忆下上文的输出。
输出文件如下（摘录部分），可以看到，输出文件依然和profile输出文件类似，是一个图。关键之处在于给每一个节点加上了stage，本文环节就要把这个输出文件换成成一个Pytorch模型，或者说是一套python文件。
node4 -- Embedding(32320, 1024, padding_idx=0) -- forward_compute_time=0.073, backward_compute_time=6.949, activation_size=6291456.0, parameter_size=132382720.000 -- stage_id=0
node5 -- EmuBidirLSTM( (bidir): LSTM(1024, 1024, bidirectional=True) (layer1): LSTM(1024, 1024) (layer2): LSTM(1024, 1024)) -- forward_compute_time=5.247, backward_compute_time=0.016, activation_size=12582912.0, parameter_size=67174400.000 -- stage_id=1
node6 -- Dropout(p=0.2) -- forward_compute_time=0.077, backward_compute_time=0.196, activation_size=12582912.0, parameter_size=0.000 -- stage_id=1
node7 -- LSTM(2048, 1024) -- forward_compute_time=3.190, backward_compute_time=5.348, activation_size=6553600.0, parameter_size=50364416.000 -- stage_id=2
node8 -- __getitem__(0) -- forward_compute_time=0.000, backward_compute_time=0.000, activation_size=6291456.0, parameter_size=0.000 -- stage_id=3
node10 -- Dropout(p=0.2) -- forward_compute_time=0.064, backward_compute_time=0.128, activation_size=6291456.0, parameter_size=0.000 -- stage_id=3
node11 -- LSTM(1024, 1024) -- forward_compute_time=2.491, backward_compute_time=4.203, activation_size=6553600.0, parameter_size=33587200.000 -- stage_id=3
node12 -- __getitem__(0) -- forward_compute_time=0.000, backward_compute_time=0.000, activation_size=6291456.0, parameter_size=0.000 -- stage_id=3
node14 -- Add -- forward_compute_time=0.000, backward_compute_time=0.000, activation_size=6291456.0, parameter_size=0.000 -- stage_id=4
node15 -- Dropout(p=0.2) -- forward_compute_time=0.059, backward_compute_time=0.121, activation_size=6291456.0, parameter_size=0.000 -- stage_id=4
node16 -- LSTM(1024, 1024) -- forward_compute_time=2.492, backward_compute_time=4.201, activation_size=6553600.0, parameter_size=33587200.000 -- stage_id=4
node17 -- __getitem__(0) -- forward_compute_time=0.000, backward_compute_time=0.000, activation_size=6291456.0, parameter_size=0.000 -- stage_id=5
node19 -- Add -- forward_compute_time=0.000, backward_compute_time=0.000, activation_size=6291456.0, parameter_size=0.000 -- stage_id=5
node1 -- node4
node4 -- node5
node2 -- node5
node5 -- node6
node6 -- node7
node7 -- node8
node8 -- node10
node10 -- node11
node11 -- node12
node12 -- node14
node8 -- node14
node14 -- node15
node15 -- node16
node16 -- node17
node17 -- node19具体合成模型代码在 optimizer/convert_graph_to_model.py。
2.1 主体逻辑
主体逻辑如下：
- 获取配置
- 从graph文件中加载，得到一个图
- 分割图为一系列子图
- 把子图转换成模块
- 合并子图，生成一个总体模型文件
- 生成
__init__.py - 生成配置文件
我们先看看源码，后续会仔细分析。
if __name__ == '__main__':
parser = argparse.ArgumentParser(
description="Convert profile graphs to generated model description")
parser.add_argument('-f', "--profile_filename", required=True,
help="Input profile filename")
parser.add_argument("--model_template_filename", default="templates/model.py.template",
help="Model template filename")
parser.add_argument("--init_template_filename", default="templates/__init__.py.template",
help="__init__.py template filename")
parser.add_argument("--conf_template_filename", default="templates/conf.json.template",
help="Conf template filename")
parser.add_argument("--stage_to_num_ranks_map", type=str, default=None,
help="Stage split")
parser.add_argument('-n', "--model_name", required=True,
help="Name of model class")
parser.add_argument('-a', "--arch", required=True,
help="Human-readable architecture name")
parser.add_argument('-o', "--output_directory", required=True,
help="Full path of output model directory")
args = parser.parse_args()
# mkdir output_directory.
subprocess.check_output("mkdir -p %s" % args.output_directory, shell=True)
# 从graph文件中加载，得到一个图
input_node = graph.Node("input_node", node_desc="Input")
full_graph = graph.Graph.from_str(open(args.profile_filename, 'r').read())
initialize_weights = (args.arch == "vgg16" or args.arch == "resnet50")
input_node.stage_id = 0
sinks = full_graph.sinks()
# Remove all unneeded sinks that are not used, makes code generation easier.
for sink in sinks:
if sink.node_desc.startswith("__getitem__"):
full_graph.remove_node(sink)
# 分割图为一系列子图
subgraphs = full_graph.partition_graph()
# 把子图转换成模块
for i, subgraph in enumerate(subgraphs):
module_name = "Stage%d" % i
module_filename = "stage%d.py" % i
if len(subgraphs) == 1:
module_name = args.model_name
module_filename = "%s.py" % args.arch
num_inputs, num_outputs = convert_subgraph_to_module(subgraph, full_graph, len(subgraphs),
module_name, initialize_weights,
args.model_template_filename,
os.path.join(args.output_directory,
module_filename))
print("Done generating %s..." % module_filename)
# 合并子图，生成一个总体模型文件。
model = []
import_statements = ["from .%s import %s" % (args.arch, args.model_name)]
pytorch_modules = None
if len(subgraphs) > 1:
python_modules, pytorch_modules, subgraph_inputs, subgraph_outputs = \
fuse_subgraphs_to_module(full_graph, subgraphs, args.model_name,
initialize_weights,
args.model_template_filename,
os.path.join(args.output_directory,
"%s.py" % args.arch))
model = ["(%s(), [%s], [%s])" % (x[0],
", ".join(["\"%s\"" % y for y in x[1]]),
", ".join(["\"%s\"" % y for y in x[2]]))
for x in zip(pytorch_modules, subgraph_inputs,
subgraph_outputs)]
model.append("(criterion, [\"%s\"], [\"loss\"])" % subgraph_outputs[-1][0])
import_statements.extend(
["from .%s import %s" % (python_module, pytorch_module)
for (python_module, pytorch_module) in zip(python_modules, pytorch_modules)])
else:
inputs = ["\"input%d\"" % i for i in range(num_inputs)]
assert(num_outputs == 1)
model.append("(%s.%s(), [%s], [\"output\"])" % (args.arch, args.model_name, ", ".join(inputs)))
model.append("(criterion, [\"output\"], [\"loss\"])")
# 生成__init__.py
with open(os.path.join(args.output_directory, "__init__.py"), 'w') as f1, \
open(args.init_template_filename, 'r') as f2:
template = f2.read()
init = template % {
"arch": args.arch,
"import_statements": "\n".join(import_statements),
"model": ",\n ".join(model),
"full_model": "%s()" % args.model_name
}
f1.write(init)
# 生成配置文件
if args.stage_to_num_ranks_map is not None:
stage_to_num_ranks_map = args.stage_to_num_ranks_map.split(",")
stage_to_num_ranks_map = [(int(x.split(":")[0]), int(x.split(":")[1]))
for x in stage_to_num_ranks_map]
num_stages = 0
for (stage_id, replication_factor) in stage_to_num_ranks_map:
num_stages += replication_factor
assert(len(stage_to_num_ranks_map) == len(pytorch_modules))
num_modules = len(pytorch_modules) + 1 # Add 1 for criterion.
elif pytorch_modules is None:
num_stages = 1
num_modules = 2 # Add 1 for criterion.
else:
num_stages = len(pytorch_modules)
num_modules = len(pytorch_modules) + 1 # Add 1 for criterion.
all_template_args = []
all_template_args.append({
"module_to_stage_map": [0] * num_modules,
"stage_to_rank_map": str({"0": list(range(num_stages))}).replace("'", "\"")
})
all_template_args.append({
"module_to_stage_map": list(range(num_modules-1)) + [num_modules-2],
"stage_to_rank_map": str({str(i): [i] for i in range(num_modules-1)}).replace("'", "\"")
})
if args.stage_to_num_ranks_map is not None:
stage_to_rank_map = {}
ranks_so_far = 0
for i in range(num_modules-1):
stage_to_rank_map[str(i)] = list(range(ranks_so_far,
ranks_so_far + stage_to_num_ranks_map[i][1]))
ranks_so_far += stage_to_num_ranks_map[i][1]
stage_to_rank_map = str(stage_to_rank_map).replace("'", "\"")
all_template_args.append({
"module_to_stage_map": list(range(num_modules-1)) + [num_modules-2],
"stage_to_rank_map": stage_to_rank_map
})
for conf_filename, template_args in zip(
["dp_conf.json", "mp_conf.json", "hybrid_conf.json"], all_template_args):
with open(os.path.join(args.output_directory, conf_filename), 'w') as f1, \
open(args.conf_template_filename, 'r') as f2:
template = f2.read()
conf = template % template_args
f1.write(conf)2.2 支撑逻辑
首先我们看看两个数组。
declaration_whitelist 是一个白名单，如果某节点在这个白名单之中，则不需要在 init 函数之中进行处理。
declaration_specialcase 数组包括一些特殊定义，如果某节点是需要特殊定义的，就进行特殊转换，比如import，层定义等等。
declaration_whitelist = [
"hidden",
"getitem",
"Add",
"Mul",
"Concat",
"Input",
"Size",
"View",
"Transpose",
"self.get_seq_lens"
]declaration_specialcase = [
"EmuBidirLSTM",
"RecurrentAttention",
"Classifier",
"MaskConv",
"ResizeInput",
"InferenceBatchSoftmax",
"BatchRNN",
"SequenceWise"
]
其次我们看看get_input_names方法。
get_input_names 函数遍历graph的节点，找到这个子图的输入。
def get_input_names(graph, full_graph, check_stages=True):
# Figure out the inputs to this sub-graph, which are the predecessors of
# nodes in the sub-graph not in the sub-graph.
# input_names is a dict mapping each predecessor's node_id to assigned
# variable name.
nodes = graph.nodes
input_names = {}
counter = 0
for node_id in nodes:
if (node_id in full_graph.in_edges and
len(full_graph.in_edges[node_id]) > 0):
for in_node in full_graph.in_edges[node_id]:
if in_node.stage_id != nodes[node_id].stage_id and check_stages:
# Skip hidden inputs.
if full_graph.nodes[in_node.node_id].node_desc.startswith("hidden"):
continue
input_names[in_node.node_id] = "input%d" % counter
counter += 1
else:
if graph.nodes[node_id].node_desc.startswith("Input"):
input_names[node_id] = "input%d" % counter
counter += 1
return input_names我们接下来看看具体模型转换。
3.1 分离子图
首先，main函数需要按照stage来分离子图。
因为在前文中，已经把模型的层分配到了各个Stage之上，所以本阶段就是使用 partition_graph 把每个Stage所包含的层分离出来。
input_node = graph.Node("input_node", node_desc="Input")
full_graph = graph.Graph.from_str(open(args.profile_filename, 'r').read())
initialize_weights = (args.arch == "vgg16" or args.arch == "resnet50")
input_node.stage_id = 0
sinks = full_graph.sinks()
# Remove all unneeded sinks that are not used, makes code generation easier.
# 去除没有使用的sink
for sink in sinks:
if sink.node_desc.startswith("__getitem__"):
full_graph.remove_node(sink)
subgraphs = full_graph.partition_graph()partition_graph 对应的代码具体逻辑为：
遍历节点，找到所有的stage。
得到所有stage id之后，按照stage id来构建子图，具体就是针对给定的stage，在所有节点中查找对应stage的节点，构建一个子图。
def partition_graph(self): stage_ids = set() # 遍历节点，找到所有的stage for node_id in self.nodes: stage_ids.add(self.nodes[node_id].stage_id) # stage_ids 为 {0, 1, 2, 3, 4, 5, 6, 7, 8, 9} if len(stage_ids) == 1: return [self.copy()] subgraphs = [] # 按照stage构建子图 for stage_id in stage_ids: subgraphs.append(self.partition_graph_helper(stage_id)) return subgraphs # 针对给定的stage，在所有节点中查找对应stage的节点，构建一个子图 def partition_graph_helper(self, stage_id): subgraph = Graph() for node1_id in self.nodes: if self.nodes[node1_id].stage_id == stage_id: subgraph.add_node(self.nodes[node1_id]) if node1_id not in self.edges: continue for node2 in self.edges[node1_id]: if node2.stage_id == stage_id: subgraph.add_edge(self.nodes[node1_id], node2) return subgraph
得到子图为：
subgraphs = {list: 10}
00 = {Graph}
'node4' = {Node} node4 -- Embedding(32320, 1024, padding_idx=0) -- forward_compute_time=0.073, backward_compute_time=6.949, activation_size=6291456.0, parameter_size=132382720.000 -- stage_id=0
'node1' = {Node} node1 -- Input0 -- forward_compute_time=0.000, backward_compute_time=0.000, activation_size=0.0, parameter_size=0.000 -- stage_id=0
'node2' = {Node} node2 -- Input1 -- forward_compute_time=0.000, backward_compute_time=0.000, activation_size=0.0, parameter_size=0.000 -- stage_id=0
'node3' = {Node} node3 -- Input2 -- forward_compute_time=0.000, backward_compute_time=0.000, activation_size=0.0, parameter_size=0.000 -- stage_id=0
__len__ = {int} 4
01 = {Graph} node5
edges = {dict: 1} {'node5': [<graph.graph.Node object at 0x7f9c5be91438>]}
in_edges = {dict: 1} {'node6': [<graph.graph.Node object at 0x7f9c5be91470>]}
nodes = {dict: 2} {'node5': <graph.graph.Node object at 0x7f9c5be91470>, 'node6': <graph.graph.Node object at 0x7f9c5be91438>}
'node5' = {Node} node5 -- EmuBidirLSTM( (bidir): LSTM(1024, 1024, bidirectional=True) (layer1): LSTM(1024, 1024) (layer2): LSTM(1024, 1024)) -- forward_compute_time=5.247, backward_compute_time=0.016, activation_size=12582912.0, parameter_size=67174400.000 -- stage_id=1
'node6' = {Node} node6 -- Dropout(p=0.2) -- forward_compute_time=0.077, backward_compute_time=0.196, activation_size=12582912.0, parameter_size=0.000 -- stage_id=1
__len__ = {int} 2
......3.2 转换模型
在main函数之中，对于每个子图，将其转换为一个Pytorch Module，就对应着一个python文件。
就是说，每一层都是这个 Module 的一个子模块。
for i, subgraph in enumerate(subgraphs): # 遍历每一个子图
module_name = "Stage%d" % i
module_filename = "stage%d.py" % i
if len(subgraphs) == 1:
module_name = args.model_name
module_filename = "%s.py" % args.arch
# 把这个子图转换成一个module
num_inputs, num_outputs = convert_subgraph_to_module(subgraph, full_graph, len(subgraphs),
module_name, initialize_weights,
args.model_template_filename,
os.path.join(args.output_directory,
module_filename))
print("Done generating %s..." % module_filename)转换模型逻辑如下：假如输入为一个graph，里面包含了若干nodes，convert_subgraph_to_module 会把这个graph 转换成为一个module。
graph = {Graph}
edges = {dict: 1}
in_edges = {dict: 1}
marked_nodes = {set: 2}
nodes = {dict: 2}
'node5' = {Node} node5 -- EmuBidirLSTM( (bidir): LSTM(1024, 1024, bidirectional=True) (layer1): LSTM(1024, 1024) (layer2): LSTM(1024, 1024)) -- forward_compute_time=5.247, backward_compute_time=0.016, activation_size=12582912.0, parameter_size=67174400.000 -- stage_id=1
'node6' = {Node} node6 -- Dropout(p=0.2) -- forward_compute_time=0.077, backward_compute_time=0.196, activation_size=12582912.0, parameter_size=0.000 -- stage_id=1
__len__ = {int} 2我们逐一分析。
3.2.1 转换Module
转换Module逻辑如下：
- get_input_names 函数遍历graph，找到这个子图的输入。
- 如果节点在输入中，则构建forward函数定义部分，为后续生成代码做准备。得到 function_definition 类似为 ['out0 = input0.clone()', 'out1 = input1.clone()']。
- 遍历图中的节点，做如下操作，基本就是依据节点性质，生成各种python语句：
- 得到每一层的相关信息，比如名字，输出，是不是inplace操作。
- 如果某节点是需要特殊定义的，就进行特殊转换，比如import，层定义等等
- 归并import语句
- 如果节点描述不在声明白名单之中，则记录，后续会在init方法生成时候对这些节点生成构建语句。
- 得到节点入边
- 如果节点在内置运算符之中，直接构造python语句。
- 如果不是内置运算，就直接设置，比如
'out2 = self.layer2(out0, out1)'。
- 确保模块输出是按照原始模型的顺序输出。
- 如果需要初始化权重，则做处理。
- 应用模版文件生成模型，就是把前面生成的各种python语句填充到模版文件之中。
- 写入模型python文件。
下面代码注解中，有部分运行时变量的打印。
def convert_subgraph_to_module(graph, full_graph, num_subgraphs, module_name, initialize_weights,
model_template_filename, output_filename):
model_template = open(model_template_filename, 'r').read()
nodes = graph.topological_sort()
import_statements = []
module_methods = []
counter = 0
layer_names = {}
layer_names_and_declarations = []
function_definition = []
# get_input_names 函数遍历graph，找到这个子图的输入
input_names = get_input_names(graph, full_graph)
num_inputs = len(input_names)
output_names = input_names.copy()
sources = graph.sources()
# Now, generate expressions for each node.
# Iterate through nodes in topological order, and add output_name mappings for
# each expression. Use this output_name mapping when generating expressions
# in the model's implementation file.
# TODO: Make sure that nodes with multiple inputs have the inputs in the
# right order (even though this probably does not matter in practice).
# 构建forward函数定义部分，为后续生成代码做准备
for node_id in input_names:
output_name = "out%d" % counter
function_definition.append("%s = %s.clone()" % (output_name,
input_names[node_id]))
output_names[node_id] = output_name
counter += 1
# 得到 function_definition 为 ['out0 = input0.clone()', 'out1 = input1.clone()']
# 遍历图中的节点
for node in nodes:
# 层相关信息
layer_call = None
layer_name = "self.layer%d" % counter
output_name = "out%d" % counter
layer_declaration = "torch.nn.%s" % (
node.node_desc.replace("inplace", "inplace=True"))
layer_names[node.node_id] = layer_name
if node.node_id not in output_names:
output_names[node.node_id] = output_name
# Skip layers that don't need a declaration (example: '+=').
for declaration in declaration_specialcase:
# 如果某节点是需要特殊定义的，就进行特殊转换，比如import，层定义等等
if node.node_desc.startswith(declaration):
found = True
if declaration == "EmuBidirLSTM":
m = re.search(r'.*LSTM\((\d+), (\d+)\).*', node.node_desc)
input_size = int(m.group(1))
hidden_size = int(m.group(2))
layer_declaration = "EmuBidirLSTM(%d, %d)" % (input_size, hidden_size)
import_statements.append("from seq2seq.models.encoder import EmuBidirLSTM")
# 这里得到 import_statements 为 ['from seq2seq.models.encoder import EmuBidirLSTM']，layer_declaration 为 'EmuBidirLSTM(1024, 1024)'
elif declaration == "RecurrentAttention":
m = re.search(r'.*LSTM\((\d+), (\d+)\).*', node.node_desc)
input_size = int(m.group(1))
hidden_size = int(m.group(2))
m = re.search(r'.*in_features=(\d+), out_features=(\d+).*', node.node_desc)
context_size = int(m.group(1))
layer_declaration = "RecurrentAttention(%d, %d, %d)" % (input_size, hidden_size, context_size)
import_statements.append("from seq2seq.models.decoder import RecurrentAttention")
# 省略部分代码
elif declaration == "InferenceBatchSoftmax":
layer_declaration = "InferenceBatchSoftmax()"
import_statements.append("from model import InferenceBatchSoftmax")
break
# 归并import语句
import_statements = list(set(import_statements))
# 如果节点描述不在声明白名单之中，则处理
found = False
for declaration in declaration_whitelist:
if node.node_desc.startswith(declaration):
found = True
if not found:
layer_names_and_declarations.append((layer_name, layer_declaration))
# 得到节点入边
if node.node_id in full_graph.in_edges:
in_edges = full_graph.in_edges[node.node_id]
else:
in_edges = []
if len(in_edges) == 0 and node.node_desc.startswith("Input"):
pass # Don't need to do anything for this case.
else:
# 看看节点是否在内置运算符之中
# node_desc 为 'EmuBidirLSTM( (bidir): LSTM(1024, 1024, bidirectional=True) (layer1): LSTM(1024, 1024) (layer2): LSTM(1024, 1024))'
if node.node_desc.startswith("Size"):
assert(len(in_edges) == 1)
m = re.search(r'Size\((-?\d+)\)', node.node_desc)
idx = int(m.group(1))
layer_call = "%s = %s.size(%d)" % (output_name,
output_names[in_edges[0].node_id],
idx)
elif node.node_desc.startswith("Add"):
assert(len(in_edges) == 2)
node1 = in_edges[0]
node2 = in_edges[1]
if len(full_graph.edges[node1.node_id]) > 1:
tmp = node1
node1 = node2
node2 = tmp
layer_call = "%s = %s + %s" % (output_names[node1.node_id],
output_names[node1.node_id],
output_names[node2.node_id])
output_names[node.node_id] = output_names[node1.node_id]
# 省略部分代码
elif node.node_desc.startswith("hidden"):
pass
elif node.node_desc == "self.get_seq_lens":
assert(len(in_edges) == 1)
in_node = in_edges[0]
layer_call = "%s = %s(%s)" % (output_name, node.node_desc, output_names[in_node.node_id])
else:
# 如果不是内置运算，就直接设置，这里为 'out2 = self.layer2(out0, out1)'
layer_call = "%s = %s(%s)" % (output_name, layer_name,
", ".join([output_names[in_node.node_id]
for in_node in in_edges]))
if layer_call is not None:
function_definition.append(layer_call)
counter += 1
# Ensure that outputs of a module are returned in the same order as
# the original model implementation.
# TODO: This might not work as intended for sub-graphs
# 确保模块输出是按照原始模型的顺序输出
full_graph.populate_depths()
graph_output_names, _ = get_output_names(graph, full_graph, 0)
for key in graph_output_names:
graph_output_names[key] = output_names[key]
output_names_list = get_tensor_names_list(graph_output_names)
num_outputs = len(output_names_list)
function_definition.append("return %s" %
get_output_tuple_str(output_names_list))
# function_definition 是 ['out0 = input0.clone()', 'out1 = input1.clone()', 'out2 = self.layer2(out0, out1)', 'out3 = self.layer3(out2)', 'return out3']
# Layer declarations are added to the constructor of the module.
# Function definitions are added to the `forward()' method of the
# module.
layer_declarations_str = "\n ".join([
"%s = %s" % (x[0], x[1]) for x in layer_names_and_declarations])
# 如果需要初始化权重，则做处理
if initialize_weights:
layer_declarations_str += "\n self._initialize_weights()"
module_methods.append("""def _initialize_weights(self):
for m in self.modules():
if isinstance(m, torch.nn.Conv2d):
torch.nn.init.kaiming_normal_(m.weight, mode='fan_out', nonlinearity='relu')
if m.bias is not None:
torch.nn.init.constant_(m.bias, 0)
elif isinstance(m, torch.nn.BatchNorm2d):
torch.nn.init.constant_(m.weight, 1)
torch.nn.init.constant_(m.bias, 0)
elif isinstance(m, torch.nn.Linear):
torch.nn.init.normal_(m.weight, 0, 0.01)
torch.nn.init.constant_(m.bias, 0)""")
function_definition_str = "\n ".join(function_definition)
# function_definition_str 为 "\n ".join(function_definition) ['out0 = input0.clone()', 'out1 = input1.clone()', 'out2 = self.layer2(out0, out1)', 'out3 = self.layer3(out2)', 'return out3']
input_names_list = get_tensor_names_list(input_names)
input_names = ", ".join(input_names_list
# input_names 为 'input1, input0'
# 应用模版文件生成模型
model = model_template % {"layer_declarations": layer_declarations_str,
"function_definition": function_definition_str,
"module_name": module_name,
"inputs": input_names,
"import_statements": "\n".join(import_statements),
"module_methods": "\n\n".join(module_methods)}
# 写入模型python文件
with open(output_filename, 'w') as f:
f.write(model)
return num_inputs, num_outputs3.2.2 模版文件
上面代码中，是依据应用模版文件生成模型，模版文件位于：optimizer/templates/model.py.template，内容如下，具体就是使用转换过程中生成的python语句对模版文件进行填充。
import torch
%(import_statements)s
class %(module_name)s(torch.nn.Module):
def __init__(self):
super(%(module_name)s, self).__init__()
%(layer_declarations)s
%(module_methods)s
def forward(self, %(inputs)s):
%(function_definition)s3.2.3 生成文件
前面代码之中，如下语句会生成若干模型文件，每一个subgraph会生成一个python文件。
# 写入模型python文件
with open(output_filename, 'w') as f:
f.write(model)
return num_inputs, num_outputs得到的生成模型文件我们举出两个文件如下：
import torch
class Stage0(torch.nn.Module):
def __init__(self):
super(Stage0, self).__init__()
self.layer6 = torch.nn.Embedding(32320, 1024, padding_idx=0)
def forward(self, input0, input1, input2):
out0 = input0.clone()
out1 = input1.clone()
out2 = input2.clone()
out6 = self.layer6(out0)
return (out1, out2, out6)再比如：
import torch
from seq2seq.models.encoder import EmuBidirLSTM
class Stage1(torch.nn.Module):
def __init__(self):
super(Stage1, self).__init__()
self.layer2 = EmuBidirLSTM(1024, 1024)
self.layer3 = torch.nn.Dropout(p=0.2)
def forward(self, input1, input0):
out0 = input0.clone()
out1 = input1.clone()
out2 = self.layer2(out0, out1)
out3 = self.layer3(out2)
return out33.3 融合模型
前一部分中，生成了若干module的python文件，都对应了一个subgraph，本节的作用就是把这些子图合并成一个大图，对应到python代码，就是生成一个新python文件，里面把各个subgraph的python 引入，生成一个总module文件。
3.3.1 main函数逻辑
main函数逻辑为：
导入参数配置，得到类似 ['from .gnmt import pd']。
把子图融合成一个总体module。
依据融合好的结果拓展 model。
依据融合好的结果拓展import 语句。
model = []
导入参数配置，得到类似 ['from .gnmt import pd']
import_statements = ["from .%s import %s" % (args.arch, args.model_name)]
pytorch_modules = None
if len(subgraphs) > 1:
# 把子图融合成一个总体module
python_modules, pytorch_modules, subgraph_inputs, subgraph_outputs = <br /> fuse_subgraphs_to_module(full_graph, subgraphs, args.model_name,
initialize_weights,
args.model_template_filename,
os.path.join(args.output_directory,
"%s.py" % args.arch))
# 依据融合好的结果拓展 model
model = ["(%s(), [%s], [%s])" % (x[0],
", ".join(["\"%s\"" % y for y in x[1]]),
", ".join(["\"%s\"" % y for y in x[2]]))
for x in zip(pytorch_modules, subgraph_inputs,
subgraph_outputs)]
model.append("(criterion, [\"%s\"], [\"loss\"])" % subgraph_outputs[-1][0])
# 依据融合好的结果拓展import 语句
import_statements.extend(
["from .%s import %s" % (python_module, pytorch_module)
for (python_module, pytorch_module) in zip(python_modules, pytorch_modules)])
else:
inputs = ["\"input%d\"" % i for i in range(num_inputs)]
assert(num_outputs == 1)
model.append("(%s.%s(), [%s], [\"output\"])" % (args.arch, args.model_name, ", ".join(inputs)))
model.append("(criterion, [\"output\"], [\"loss\"])")
3.3.2 融合模型
fuse_subgraphs_to_module 生成一个gnmt.py文件，具体逻辑如下：
- 加载模版。
- 归并模块名称。
- 处理函数定义和层定义。
- 遍历子图，构建输出和输入。
- 添加输出信息。
- 添加import信息。
- 应用模版文件。
- 输出文件。
源码如下：
def fuse_subgraphs_to_module(graph, subgraphs, model_name, initialize_weights,
model_template_filename, output_filename):
# 加载模版
model_template = open(model_template_filename, 'r').read()
# PyTorch modules are the names given to the generated stages (which are
# of type torch.nn.Module).
# Python modules are the names given to the filenames containing these
# generated torch.nn.Modules.
# 归并模块名称
pytorch_modules = []
python_modules = []
for i in range(len(subgraphs)):
pytorch_modules.append("Stage%d" % i)
python_modules.append("stage%d" % i)
# python_modules = {list: 10} ['stage0', 'stage1', 'stage2', 'stage3', 'stage4', 'stage5', 'stage6', 'stage7', 'stage8', 'stage9']
# pytorch_modules = {list: 10} ['Stage0', 'Stage1', 'Stage2', 'Stage3', 'Stage4', 'Stage5', 'Stage6', 'Stage7', 'Stage8', 'Stage9']
# 处理函数定义和层定义
layer_declarations = []
function_definition = []
for i, pytorch_module in enumerate(pytorch_modules):
layer_declarations.append("self.stage%d = %s()" % (
i, pytorch_module))
if initialize_weights:
layer_declarations.append("self._initialize_weights()")
# function_definition = {list: 0} []
# layer_declarations = {list: 10} ['self.stage0 = Stage0()', 'self.stage1 = Stage1()', 'self.stage2 = Stage2()', 'self.stage3 = Stage3()', 'self.stage4 = Stage4()', 'self.stage5 = Stage5()', 'self.stage6 = Stage6()', 'self.stage7 = Stage7()', 'self.stage8 = Stage8()', 'self.stage9 = Stage9
output_counter = 0
output_names = {}
graph_input_names = get_input_names(graph, graph, check_stages=False)
for key in graph_input_names:
output_names[key] = graph_input_names[key]
subgraph_inputs = []
subgraph_outputs = []
# 遍历子图，构建输出和输入
for i, subgraph in enumerate(subgraphs):
subgraph_input_names = get_input_names(subgraph, graph)
subgraph_output_names, output_counter = get_output_names(
subgraph, graph, output_counter)
for key in subgraph_input_names:
subgraph_input_names[key] = output_names[key]
for key in subgraph_output_names:
output_names[key] = subgraph_output_names[key]
function_definition.append("%s = self.stage%d(%s)" % (
get_output_tuple_str(get_tensor_names_list(subgraph_output_names)),
i, ", ".join(get_tensor_names_list(subgraph_input_names))))
subgraph_inputs.append(get_tensor_names_list(subgraph_input_names))
subgraph_outputs.append(get_tensor_names_list(subgraph_output_names))
#subgraph_input_names = {dict: 1} {'node47': 'out20'}
#subgraph_inputs = {list: 10} [['input0', 'input1', 'input2'], ['out2', 'out0'], ['out4'], ['out5'], ['out7', 'out6'], ['out8', 'out9', 'out2', 'out3'], ['out10', 'out12'], ['out14', 'out15', 'out16', 'out11'], ['out14', 'out17', 'out18', 'out19'], ['out20']]
#subgraph_output_names = {dict: 1} {'node48': 'out21'}
#subgraph_outputs = {list: 10} [['out2', 'out3', 'out0'], ['out4'], ['out5'], ['out7', 'out6'], ['out8', 'out9'], ['out10', 'out12', 'out11'], ['out14', 'out15', 'out16'], ['out17', 'out18', 'out19'], ['out20'], ['out21']]
# 添加输出信息
function_definition.append("return %s" %
get_output_tuple_str(get_tensor_names_list(subgraph_output_names)))
function_definition_str = "\n ".join(function_definition)
# 添加import信息
import_statements = ["from .%s import %s" % (python_module, pytorch_module)
for (python_module, pytorch_module) in zip(python_modules, pytorch_modules)]
input_names = get_input_names(graph, graph, check_stages=False)
input_names = ", ".join(get_tensor_names_list(input_names))
# 应用模版文件
model = model_template % {"layer_declarations": "\n ".join(layer_declarations),
"function_definition": function_definition_str,
"module_name": model_name,
"inputs": input_names,
"import_statements": "\n".join(import_statements),
"module_methods": ""} # TODO: Figure out if we need to pass in other module_methods here?
print("Done with sub-graph fusion...")
# 输出文件
with open(output_filename, 'w') as f:
f.write(model)
return python_modules, pytorch_modules, subgraph_inputs, subgraph_outputs3.3.3 输出
最终融合结果如下：
import torch
from .stage0 import Stage0
from .stage1 import Stage1
from .stage2 import Stage2
from .stage3 import Stage3
from .stage4 import Stage4
from .stage5 import Stage5
from .stage6 import Stage6
from .stage7 import Stage7
from .stage8 import Stage8
from .stage9 import Stage9
class pd(torch.nn.Module):
def __init__(self):
super(pd, self).__init__()
self.stage0 = Stage0()
self.stage1 = Stage1()
self.stage2 = Stage2()
self.stage3 = Stage3()
self.stage4 = Stage4()
self.stage5 = Stage5()
self.stage6 = Stage6()
self.stage7 = Stage7()
self.stage8 = Stage8()
self.stage9 = Stage9()
def forward(self, input0, input1, input2):
(out2, out3, out0) = self.stage0(input0, input1, input2)
out4 = self.stage1(out2, out0)
out5 = self.stage2(out4)
(out7, out6) = self.stage3(out5)
(out8, out9) = self.stage4(out7, out6)
(out10, out12, out11) = self.stage5(out8, out9, out2, out3)
(out14, out15, out16) = self.stage6(out10, out12)
(out17, out18, out19) = self.stage7(out14, out15, out16, out11)
out20 = self.stage8(out14, out17, out18, out19)
out21 = self.stage9(out20)
return out213.4 init 文件
为了便于使用，系统又生成了 __init__文件。
就是依据之前的 import_statements，model 等变量进行生成：
变量如下：
model = {list: 11}
00 = {str} '(Stage0(), ["input0", "input1", "input2"], ["out2", "out3", "out0"])'
01 = {str} '(Stage1(), ["out2", "out0"], ["out4"])'
02 = {str} '(Stage2(), ["out4"], ["out5"])'
03 = {str} '(Stage3(), ["out5"], ["out7", "out6"])'
04 = {str} '(Stage4(), ["out7", "out6"], ["out8", "out9"])'
05 = {str} '(Stage5(), ["out8", "out9", "out2", "out3"], ["out10", "out12", "out11"])'
06 = {str} '(Stage6(), ["out10", "out12"], ["out14", "out15", "out16"])'
07 = {str} '(Stage7(), ["out14", "out15", "out16", "out11"], ["out17", "out18", "out19"])'
08 = {str} '(Stage8(), ["out14", "out17", "out18", "out19"], ["out20"])'
09 = {str} '(Stage9(), ["out20"], ["out21"])'
10 = {str} '(criterion, ["out21"], ["loss"])'
__len__ = {int} 11
import_statements = {list: 1} ['from .gnmt import pd']
0 = {str} 'from .gnmt import pd'代码如下：
with open(os.path.join(args.output_directory, "__init__.py"), 'w') as f1, \
open(args.init_template_filename, 'r') as f2:
template = f2.read()
init = template % {
"arch": args.arch,
"import_statements": "\n".join(import_statements),
"model": ",\n ".join(model),
"full_model": "%s()" % args.model_name
}
f1.write(init)得到的__init__文件如下：
from .gnmt import pd
from .stage0 import Stage0
from .stage1 import Stage1
from .stage2 import Stage2
from .stage3 import Stage3
from .stage4 import Stage4
from .stage5 import Stage5
from .stage6 import Stage6
from .stage7 import Stage7
from .stage8 import Stage8
from .stage9 import Stage9
def arch():
return "gnmt"
def model(criterion):
return [
(Stage0(), ["input0", "input1", "input2"], ["out2", "out3", "out0"]),
(Stage1(), ["out2", "out0"], ["out4"]),
(Stage2(), ["out4"], ["out5"]),
(Stage3(), ["out5"], ["out7", "out6"]),
(Stage4(), ["out7", "out6"], ["out8", "out9"]),
(Stage5(), ["out8", "out9", "out2", "out3"], ["out10", "out12", "out11"]),
(Stage6(), ["out10", "out12"], ["out14", "out15", "out16"]),
(Stage7(), ["out14", "out15", "out16", "out11"], ["out17", "out18", "out19"]),
(Stage8(), ["out14", "out17", "out18", "out19"], ["out20"]),
(Stage9(), ["out20"], ["out21"]),
(criterion, ["out21"], ["loss"])
]
def full_model():
return pd()3.5 配置文件
接下来会生成配置文件，这个是为后续程序运行准备。具体可能会生成 "dp_conf.json", "mp_conf.json", "hybrid_conf.json" 这几个文件。
文件具体内容大致就是：哪个module配置到哪个stage之上，哪个stage配置到rank之上。
3.5.1 代码逻辑
主要逻辑是：
- 如果程序输入中已经设置了如何把stage配置到rank之上，就进行设置。
- 依据pytorch_modules进行设置stage数目和module数目。
- 对具体rank, stage, module的分配作出设置。
- 写入配置文件。
其中，pytorch_modules 是fuse_subgraphs_to_module返回的结果。
pytorch_modules = {list: 10} ['Stage0', 'Stage1', 'Stage2', 'Stage3', 'Stage4', 'Stage5', 'Stage6', 'Stage7', 'Stage8', 'Stage9']代码如下：
if args.stage_to_num_ranks_map is not None:
# 如果程序输入中已经设置了如何把stage配置到rank之上，就进行设置
stage_to_num_ranks_map = args.stage_to_num_ranks_map.split(",")
stage_to_num_ranks_map = [(int(x.split(":")[0]), int(x.split(":")[1]))
for x in stage_to_num_ranks_map]
num_stages = 0
for (stage_id, replication_factor) in stage_to_num_ranks_map:
num_stages += replication_factor
assert(len(stage_to_num_ranks_map) == len(pytorch_modules))
num_modules = len(pytorch_modules) + 1 # Add 1 for criterion.
elif pytorch_modules is None:
# 依据pytorch_modules进行设置stage数目和module数目
num_stages = 1
num_modules = 2 # Add 1 for criterion.
else:
num_stages = len(pytorch_modules)
num_modules = len(pytorch_modules) + 1 # Add 1 for criterion.
# 对具体rank, stage, module的分配作出设置
all_template_args = []
# 对数据并行进行设置
all_template_args.append({
"module_to_stage_map": [0] * num_modules,
"stage_to_rank_map": str({"0": list(range(num_stages))}).replace("'", "\"")
})
# 对模型配置进行设置
all_template_args.append({
"module_to_stage_map": list(range(num_modules-1)) + [num_modules-2],
"stage_to_rank_map": str({str(i): [i] for i in range(num_modules-1)}).replace("'", "\"")
})
# 运行时变量如下：
"""
all_template_args =
0 = {dict: 2}
'module_to_stage_map' = {list: 11} [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
'stage_to_rank_map' = {str} '{"0": [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]}'
1 = {dict: 2}
'module_to_stage_map' = {list: 11} [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 9]
'stage_to_rank_map' = {str} '{"0": [0], "1": [1], "2": [2], "3": [3], "4": [4], "5": [5], "6": [6], "7": [7], "8": [8], "9": [9]}'
"""
# 如果程序参数做设置，进行处理
if args.stage_to_num_ranks_map is not None:
stage_to_rank_map = {}
ranks_so_far = 0
for i in range(num_modules-1):
stage_to_rank_map[str(i)] = list(range(ranks_so_far,
ranks_so_far + stage_to_num_ranks_map[i][1]))
ranks_so_far += stage_to_num_ranks_map[i][1]
stage_to_rank_map = str(stage_to_rank_map).replace("'", "\"")
all_template_args.append({
"module_to_stage_map": list(range(num_modules-1)) + [num_modules-2],
"stage_to_rank_map": stage_to_rank_map
})
# 写入配置文件
for conf_filename, template_args in zip(
["dp_conf.json", "mp_conf.json", "hybrid_conf.json"], all_template_args):
with open(os.path.join(args.output_directory, conf_filename), 'w') as f1, \
open(args.conf_template_filename, 'r') as f2:
template = f2.read()
conf = template % template_args
f1.write(conf)3.5.2 数据并行
dp_config.json是专门为数据并行生成的配置文件，举例如下。
{
"module_to_stage_map": [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
"stage_to_rank_map": {"0": [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]}
}3.5.3 模型并行
mp_config.json 是专门为模型并行生成的配置文件，举例如下。
{
"module_to_stage_map": [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 9],
"stage_to_rank_map": {"0": [0], "1": [1], "2": [2], "3": [3], "4": [4], "5": [5], "6": [6], "7": [7], "8": [8], "9": [9]}
}最终结果如下，就是把模型图转换成每个stage自己对应的python文件，最后再汇总打包成一个总的python文件，用户可以直接使用。
手机扫一扫
移动阅读更方便
你可能感兴趣的文章