';' not allowed before ‘ELSE’ → ElSE前不允许有“;”

” clause not allowed in OLE automation section → 在OLE自动区段不允许“”子句

” is not a type identifier → 不是类型标识符

” not previously declared as a PROPERTY → 前面没有说明PROPERTY

‘GOTO ‘ leads into or out of TRY statement GOTO → 进入或超出TRY语句的范围

clause expected, but found → 要求子句，但出现

16-Bit fixup encountered in object file ” → 在对象文件遇到16位修复

486/487 instructions not enabled → 不能用486/487指令

Abstract methods must be virtual or dynamic→抽象方法必须为虚拟的或动态的

Array type required→需要数组类型

Assignment to FOR-Loop variable ”→给FOR循环变量赋值

Bad argument type in variable type array constructor→在变量类型数组结构中不正确的参数类型

Bad file format ”→错误的文件格式

Bad file format: →错误的文件格式

Bad global symbol definition: ” in object file ” → 对象文件”中错误的全局符号定义”

Bad unit format: → 错误的单元格式

BREAK or CONTINUE outside of loop → BREAK或CONTINUE超出循环

Cannot add or subtract relocatable symbols → 不能增加或减少可重置的符号

Cannot assign to a read-only property → 不能指定只读属性

Cannot BREAK, CONTINUE or EXIT out of a FINALLY clause → 超出FINALLY子句的范围，不能使用BREAK,CONTINUE或EXIT语句

Cannot initialize local variables → 不能初始化局部变量

Cannot initialize multiple variables → 不能初始化多个变量

Cannot initialize thread local variables → 不能初始化线程局部变量

Cannot override a static method → 不能覆盖静态方法

Cannot read a write-only property → 不能读取只写属性

Case label outside of range of case expression → CASE标号超出了CASE表达式的范围

Circular unit reference to → 对单元循环引用

Class already has a default property → 类已具有默认的属性

Class does not have a default property → 类没有默认的属性

Class or object types only allowed in type section → 在类型区段只允许有类或对象类型

Class type required → 需要类类型

Close error on → 文件关闭错误

Compile terminated by user → 用户中止编译

Constant expected → 要求常量

Constant expression expected → 要求常量表达式

Constant expression violates subrange bounds → 常量表达式超出子界范围

Constant object cannot be passed as var parameter → 常量对象不能作为变量参数传递

Constant or type identifier expected → 要求常量或类型标识符

Constants cannot be used as open array arguments → 常量不能用作打开数组参数

Constructing instance of ” containing abstract methods → 构造的实体包含抽象的方法

Could not compile used unit ” → 不能用单元编译

Could not create output file → 不能建立输出文件

Could not load RLINK32.DLL → 不能加载RLINK32.DLL

Data type too large: exceeds 2 GB → 数据类型太大：超过2GB

Declaration of differs from previous declaration → 的说明与先前的说明不同

Default property must be an array property → 默认的属性必须为数组属性

Default values must be of ordinal, pointer or small set type → 默认的值必须为序数、指针或小集类型

Destination cannot be assigned to → 目标不能指定

Destination is inaccessible → 目标不能存取

Dispid ” already used by ” → DISPID标识号已被使用

Dispid clause only allowed in OLE automation section → DISPID子句只能在OLE自动区段中使用

Division by zero → 除数为零

Duplicate case label → CASE标号重复

Duplicate tag value → 重复的标志值

Dynamic method or message handler not allowed here → 这里不允许有动态方法或信息处理程序

Dynamic methods and message handlers not allowed in OLE automation section → 在OLE自动区段不允许有动态方法或消息处理程序

Element 0 inaccessible – use ‘Length’ or ‘SetLength’ → 元素0不能存取-使用LENGTH或SETLENGTH

Error in numeric constant → 数值常量错误

EXCEPT or FINALLY expected → 要求EXCEPT或FINALLY

EXPORTS allowed only at global scope EXPORTS →只允许在全局范围使用

Expression has no value →表达式没有值

Expression too complicated →表达式太复杂

Field definition not allowed in OLE automation section →在OLE自动区段中不允许域定义

Field definition not allowed after methods or properties →在方法或属性后不允许域定义

Field or method identifier expected →要求域或方法标识符

File not found: →文件没有找到

File type not allowed here →这儿不允许文件类型

For loop control variable must be simple local variable → FOR循环控制变量必须为简单局部变量

For loop control variable must have ordinal type → FOR循环控制变量必须为序数类型

FOR or WHILE loop executes zero times – deleted → FOR或WHILE循环执行零次-删除

FOR-Loop variable ” cannot be passed as var parameter → FOR循环变量不能作为参数传递

FOR-Loop variable ” may be undefined after loop → 在循环后的FOR循环变量是不确定的

Function needs result type → 函数需要结果类型

Identifier redeclared: ” 标识符 → 重复说明

Illegal character in input file: ” ($) →在输入文件中的非法字符”

Illegal message method index → 非法的消息方法指针

Illegal reference to symbol ” in object file ” →在对象文件中对符号的非法引用

Illegal type in OLE automation section: ” →在OLE自动区段中的非法类型

Illegal type in Read/Readln statement →在Read/Readln语句中的非法类型

Illegal type in Write/Writeln statement →在Write/Writeln语句中的非法类型

Inaccessible value → 不可存取的值

Incompatible types: ” and ” → 不兼容的类型和

Incompatible types: → 不兼容的类型

Inline assembler stack overflow → 内联汇编溢出

Inline assembler syntax error → 内联汇编语法错误

Instance variable ” inaccessible here → 实体变量在这里不能存取

Integer constant or variable name expected → 要求整形常量或变量名

Integer constant too large → 整型常量太大

Internal error: → 内部错误

Invalid combination of opcode and operands → 操作码与操作对象的无效组合

Invalid compiler directive: ” → 无效的编译指令

Invalid function result type → 无效的函数值类型

Invalid message parameter list →无效的消息参数列表

Invalid register combination →无效的寄存器组合

Invalid typecast → 无效的TYPECASE

Label ” is not declared in current procedure →在当前的过程中没有说明标号

Label already defined: ” → 标号已经定义

Label declaration not allowed in interface part → 在界面部分不允许标号说明

Label declared and referenced, but not set: ” → 标号被说明及引用,但不能设置

Label expected → 要求标号

Left side cannot be assigned to → 左边不能赋值

Line too long (more than 255 characters) → 行太长(超出255个字符)

Local class or object types not allowed → 不允许局部的类或对象类型

Local procedure/function ” assigned to procedure variable →局部过程/函数赋给过程变量

LOOP/JCXZ distance out of range LOOP/JCXZ → 距离超出范围

Low bound exceeds high bound → 下界超过上界

Memory reference expected → 要求内存引用

Method ” hides virtual method of base type ” → 方法隐藏了基类型为的虚拟方法

Method ” not found in base class → 在基类中没有找到方法

Method identifier expected → 要求方法标识符

Missing ENDIF directive → 缺少ENDIF指令

Missing operator or semicolon → 缺少操作符或分号

Missing or invalid conditional symbol in ‘$’ directive → 在$指令中缺少或无效的条件符号

Missing parameter type → 缺少参数类型

Necessary library helper function was eliminated by linker → 必要的库帮助函数被连接程序删除

No definition for abstract method ” allowed → 抽象方法没有定义

Not enough actual parameters → 没有足够的实际参数

Number of elements differs from declaration → 元素数与说明不同

Numeric overflow → 数值溢出

Object or class type required → 需要对象或类类型

Object type required → 需要对象类型

Only register calling convention allowed in OLE automation section → 在OLE自动区段中只允许寄存器调用约定

Operand size mismatch → 运算对象大小匹配

Operator not applicable to this operand type → 运算符不使用于这一运算对象类型

order of fields in record constant differs from declaration → 在记录常量中的域次序与说明不同

ordinal type required → 需要序数类型

Out of memory→ 内存溢出

Overflow in conversion or arithmetic operation → 转换或算术操作溢出

Overriding automated virtual method ” cannot specify a dispid → 覆盖的自动虚拟方法不能指定DISPID

PACKED not allowed here →这里不允许PACKED

Pointer type required → 需要指针类型

Procedure cannot have a result type → 过程不能有结果类型

Procedure DISPOSE needs destructor → 过程DISPOSE需要destructor

Procedure FAIL only allowed in constructor →过程FAIL只允许在constructor方法中

Procedure NEW needs constructor → 过程NEW需要constructor方法

PROCEDURE or FUNCTION expected → 要求PROCEDURE或FUNCTION

Procedure or function name expected → 要求过程或函数名

Program or unit ” recursively uses itself → 程序或单元递归

Property ” does not exist in base class → 在基类中属性不存在

Published property ” cannot be of type → Published属性不能具有类型

Published Real48 property ” must be Single, Double or Extended Published REAL → 属性必须为Single, Double或Extended

Re-raising an exception only allowed in exception handler → 在意外处理中只允许重新引起意外处理

Read error on → 文件读出错

Record, object or class type required → 需要记录,对象或类类型

Redeclaration of ” hides a member in the base class → 的重新说明隐藏了基类中一个元素

Redeclaration of property not allowed in OLE automation section → 在OLE自动区段中不允许属性重复说明

Return value of function ” might be undefined → 函数的返回值可能没有定义

Seek error on → 在中搜索错误

Segment/Offset pairs not supported in Borland 32-bit Pascal → 在Borland 32位的PASCAL中不支持Segment/Offset对

Sets may have at most 256 elements → 集至少有256个元素

Size of published set ” is >32 bits published → 集的大小大于32字节

Slice standard function only allowed as open array argument Slice → 标准函数只允许作为打开数组参数

Statement expected, but expression of type ” found → 要求语句,但出现类型的表达式

Statements not allowed in interface part → 在界面中不允许的语句

String constant too long → 字符串常量太长

String constant truncated to fit STRING[] → 字符串常量截取到适合STRING[]

Strings may have at most 255 elements → 字符串至少255个元素

Structure field identifier expected → 要求结构域标识符

Syntax error in real number →实数语法错误

System unit out of date or corrupted: missing ” → 系统单元超出日期或损坏:缺少

Text after final ‘END. → 编译器忽略END.后的文本

This form of method call only allowed for class methods → 该方法的窗体只允许类方法

This form of method call only allowed in methods of derived types → 该方法的窗体只允许在导出类型的方法中

This type cannot be initialized →这一类型不能初始化

Thread local variables cannot be ABSOLUTE →线程局部变量不能是ABSOLUTE

Thread local variables cannot be local to a function or procedure → 线程局部变量对函数不能是局部的

Too many actual parameters → 太多的实际参数

Too many conditional symbols → 太多的条件符号

Type ” has no type info → 类型没有类型信息

Type ” is not yet completely defined → 类型至今没有定义

Type ” must be a class to have a PUBLISHED section → 类型必须是在PUBLISHED区段中的类

Type ” must be a class to have OLE automation → 类型必须是具有OLE自动的类

Type ” needs finalization – not allowed in file type → 类型需要初始化-不允许在文件类型中

Type ” needs finalization – not allowed in variant record → 类型需要初始化-不允许在变体记录

Type expected → 要求TYPE

Type not allowed in OLE Automation call → 在OLE自动调用中不允许的类型

Type of expression must be BOOLEAN → 表达式的类型必须为BOOLEAN型

Type of expression must be INTEGER → 表达式的类型必须为INTEGER型

TYPEINFO standard function expects a type identifier → TYPEINFO 标准函数要求类型标识符

TYPEOF can only be applied to object types with a VMT → TYPEOF只能用于具有VMT的对象类型

Types of actual and formal var parameters must be identical →形参与实参必须一致

Undeclared identifier: ” → 未说明的标识符

Unexpected end of file in comment started on line → 以行开始的注释中出现不应有的文件结束

Unit was compiled with a different version of → 单元与不同版本的编译

Unit name mismatch: ” → 单元名不匹配

Unknown directive: ” → 未知的指令

Unnamed arguments must precede named arguments in OLE Automation call → 在OLE自动调用中未命名的参数必须在命名的参数前

Unsatisfied forward or external declaration: ‘ ‘ →不满足的向前或外部说明 Unterminated string → 未结束的字符串

Value assigned to ” never used → 赋给的值从未使用过

Variable ” inaccessible here due to optimization → 由于优化,变量名在这里不能存取

Variable ” is declared but never used in ” → 变量名已说明,但不曾使用

Variable ” might not have been initialized → 变量名可能没有初始化

Variable required → 需要变量

Virtual constructors are not allowed → 不允许虚拟的constructors方法

Write error on → 文件写错误

Wrong or corrupted version of RLINK32.DLL → RLINK32.DLL版本错误或不能用