iphone网络编程总结

一：确认网络环境3G/WIFI

1. 添加源文件和framework
    
    开发Web等网络应用程序的时候，需要确认网络环境，连接情况等信息。如果没有处理它们，是不会通过Apple的审(我们的)查的。
    Apple 的 例程 Reachability 中介绍了取得/检测网络状态的方法。要在应用程序程序中使用Reachability，首先要完成如下两部：
    
    1.1. 添加源文件：
    在你的程序中使用 Reachability 只须将该例程中的 Reachability.h 和 Reachability.m 拷贝到你的工程中。如下图：

1.2.添加framework：
    将SystemConfiguration.framework 添加进工程。如下图：
    
    
    2. 网络状态
    
    Reachability.h中定义了三种网络状态：
    typedef enum {
        NotReachable = 0,            //无连接
        ReachableViaWiFi,            //使用3G/GPRS网络
        ReachableViaWWAN            //使用WiFi网络
    } NetworkStatus;
    
    因此可以这样检查网络状态：

Reachability *r = [Reachability reachabilityWithHostName:@“www.apple.com”];
    switch ([r currentReachabilityStatus]) {
            case NotReachable:
                    // 没有网络连接
                    break;
            case ReachableViaWWAN:
                    // 使用3G网络
                    break;
            case ReachableViaWiFi:
                    // 使用WiFi网络
                    break;
    }
    
    3.检查当前网络环境
    程序启动时，如果想检测可用的网络环境，可以像这样
    // 是否wifi
    + (BOOL) IsEnableWIFI {
        return ([[Reachability reachabilityForLocalWiFi] currentReachabilityStatus] != NotReachable);
    }

// 是否3G
    + (BOOL) IsEnable3G {
        return ([[Reachability reachabilityForInternetConnection] currentReachabilityStatus] != NotReachable);
    }
    例子：
    - (void)viewWillAppear:(BOOL)animated {    
    if (([Reachability reachabilityForInternetConnection].currentReachabilityStatus == NotReachable) &&
            ([Reachability reachabilityForLocalWiFi].currentReachabilityStatus == NotReachable)) {
            self.navigationItem.hidesBackButton = YES;
            [self.navigationItem setLeftBarButtonItem:nil animated:NO];
        }
    }

4. 链接状态的实时通知
    网络连接状态的实时检查，通知在网络应用中也是十分必要的。接续状态发生变化时，需要及时地通知用户：
    
    Reachability 1.5版本
    // My.AppDelegate.h
    #import "Reachability.h"

@interface MyAppDelegate : NSObject {
        NetworkStatus remoteHostStatus;
    }

@property NetworkStatus remoteHostStatus;

@end

// My.AppDelegate.m
    #import "MyAppDelegate.h"

@implementation MyAppDelegate
    @synthesize remoteHostStatus;

// 更新网络状态
    - (void)updateStatus {
        self.remoteHostStatus = [[Reachability sharedReachability] remoteHostStatus];
    }

// 通知网络状态
    - (void)reachabilityChanged:(NSNotification *)note {
        [self updateStatus];
        if (self.remoteHostStatus == NotReachable) {
            UIAlertView *alert = [[UIAlertView alloc] initWithTitle:NSLocalizedString(@"AppName", nil)
                         message:NSLocalizedString (@"NotReachable", nil)
                        delegate:nil cancelButtonTitle:@"OK" otherButtonTitles: nil];
            [alert show];
            [alert release];
        }
    }

// 程序启动器，启动网络监视
    - (void)applicationDidFinishLaunching:(UIApplication *)application {
    
        // 设置网络检测的站点
        [[Reachability sharedReachability] setHostName:@"www.apple.com"];
        [[Reachability sharedReachability] setNetworkStatusNotificationsEnabled:YES];
        // 设置网络状态变化时的通知函数
        [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(reachabilityChanged:)
                                                 name:@"kNetworkReachabilityChangedNotification" object:nil];
        [self updateStatus];
    }

- (void)dealloc {
        // 删除通知对象
        [[NSNotificationCenter defaultCenter] removeObserver:self];
        [window release];
        [super dealloc];
    }
    
    Reachability 2.0版本

// MyAppDelegate.h
    @class Reachability;

@interface MyAppDelegate : NSObject {
            Reachability  *hostReach;
        }

@end

// MyAppDelegate.m
    - (void)reachabilityChanged:(NSNotification *)note {
        Reachability* curReach = [note object];
        NSParameterAssert([curReach isKindOfClass: [Reachability class]]);
        NetworkStatus status = [curReach currentReachabilityStatus];
    
        if (status == NotReachable) {
            UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"AppName""
                              message:@"NotReachable"
                              delegate:nil
                              cancelButtonTitle:@"YES" otherButtonTitles:nil];
                              [alert show];
                              [alert release];
        }
    }
    - (void)applicationDidFinishLaunching:(UIApplication *)application {
        // …
                  
        // 监测网络情况
        [[NSNotificationCenter defaultCenter] addObserver:self
                              selector:@selector(reachabilityChanged:)
                              name: kReachabilityChangedNotification
                              object: nil];
        hostReach = [[Reachability reachabilityWithHostName:@"www.google.com"] retain];
        hostReach startNotifer];
        // …
    }

二：使用NSConnection下载数据
    
    1.创建NSConnection对象，设置委托对象
    
    NSMutableURLRequest *request = [NSMutableURLRequest requestWithURL:[NSURL URLWithString:[self urlString]]];
    [NSURLConnection connectionWithRequest:request delegate:self];
    
    2. NSURLConnection delegate委托方法
        - (void)connection:(NSURLConnection *)connection didReceiveResponse:(NSURLResponse *)response;  
        - (void)connection:(NSURLConnection *)connection didFailWithError:(NSError *)error;  
        - (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data;  
        - (void)connectionDidFinishLoading:(NSURLConnection *)connection;

3. 实现委托方法
    - (void)connection:(NSURLConnection *)connection didReceiveResponse:(NSURLResponse *)response {
        // store data
        [self.receivedData setLength:0];            //通常在这里先清空接受数据的缓存
    }
    
    - (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data {
           /* appends the new data to the received data */
        [self.receivedData appendData:data];        //可能多次收到数据，把新的数据添加在现有数据最后
    }

- (void)connection:(NSURLConnection *)connection didFailWithError:(NSError *)error {
        // 错误处理
    }

- (void)connectionDidFinishLoading:(NSURLConnection *)connection {
        // disconnect
        [UIApplication sharedApplication].networkActivityIndicatorVisible = NO;  
        NSString *returnString = [[NSString alloc] initWithData:self.receivedData encoding:NSUTF8StringEncoding];
        NSLog(returnString);
        [self urlLoaded:[self urlString] data:self.receivedData];
        firstTimeDownloaded = YES;
    }

三：使用NSXMLParser解析xml文件

1. 设置委托对象，开始解析
    NSXMLParser *parser = [[NSXMLParser alloc] initWithData:data];   //或者也可以使用initWithContentsOfURL直接下载文件，但是有一个原因不这么做：
    // It's also possible to have NSXMLParser download the data, by passing it a URL, but this is not desirable
    // because it gives less control over the network, particularly in responding to connection errors.
    [parser setDelegate:self];
    [parser parse];

2. 常用的委托方法
    - (void)parser:(NSXMLParser *)parser didStartElement:(NSString *)elementName
                                namespaceURI:(NSString *)namespaceURI
                                qualifiedName:(NSString *)qName
                                attributes:(NSDictionary *)attributeDict;
    - (void)parser:(NSXMLParser *)parser didEndElement:(NSString *)elementName
                                namespaceURI:(NSString *)namespaceURI
                                qualifiedName:(NSString *)qName;
    - (void)parser:(NSXMLParser *)parser foundCharacters:(NSString *)string;
    - (void)parser:(NSXMLParser *)parser parseErrorOccurred:(NSError *)parseError;

static NSString *feedURLString = @"http://www.yifeiyang.net/test/test.xml";

3.  应用举例
    - (void)parseXMLFileAtURL:(NSURL *)URL parseError:(NSError **)error
    {
        NSXMLParser *parser = [[NSXMLParser alloc] initWithContentsOfURL:URL];
        [parser setDelegate:self];
        [parser setShouldProcessNamespaces:NO];
        [parser setShouldReportNamespacePrefixes:NO];
        [parser setShouldResolveExternalEntities:NO];
        [parser parse];
        NSError *parseError = [parser parserError];
        if (parseError && error) {
            *error = parseError;
        }
        [parser release];
    }

- (void)parser:(NSXMLParser *)parser didStartElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI
                                        qualifiedName:(NSString*)qName attributes:(NSDictionary *)attributeDict{
        // 元素开始句柄
        if (qName) {
            elementName = qName;
        }
        if ([elementName isEqualToString:@"user"]) {
            // 输出属性值
            NSLog(@"Name is %@ , Age is %@", [attributeDict objectForKey:@"name"], [attributeDict objectForKey:@"age"]);
        }
    }

- (void)parser:(NSXMLParser *)parser didEndElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI
                                        qualifiedName:(NSString *)qName
    {
        // 元素终了句柄
        if (qName) {
               elementName = qName;
        }
    }

- (void)parser:(NSXMLParser *)parser foundCharacters:(NSString *)string
    {
        // 取得元素的text
    }

NSError *parseError = nil;

一：确认网络环境3G/WIFI

1. 添加源文件和framework

开发Web等网络应用程序的时候，需要确认网络环境，连接情况等信息。如果没有处理它们，是不会通过Apple的审(我们的)查的。

Apple 的例程 Reachability 中介绍了取得/检测网络状态的方法。要在应用程序程序中使用Reachability，首先要完成如下两部：

1.1. 添加源文件：

在你的程序中使用 Reachability 只须将该例程中的 Reachability.h 和 Reachability.m 拷贝到你的工程中。如下图：

1.2.添加framework：

将SystemConfiguration.framework 添加进工程。如下图：

2. 网络状态

Reachability.h中定义了三种网络状态：

typedef enum {

NotReachable = 0,            //无连接

ReachableViaWiFi,            //使用3G/GPRS网络

ReachableViaWWAN            //使用WiFi网络

} NetworkStatus;

因此可以这样检查网络状态：

Reachability *r = [Reachability reachabilityWithHostName:@“www.apple.com”];

switch ([r currentReachabilityStatus]) {

case NotReachable:

// 没有网络连接

break;

case ReachableViaWWAN:

// 使用3G网络

break;

case ReachableViaWiFi:

// 使用WiFi网络

break;

}

3.检查当前网络环境

程序启动时，如果想检测可用的网络环境，可以像这样

// 是否wifi

+ (BOOL) IsEnableWIFI {

return ([[Reachability reachabilityForLocalWiFi] currentReachabilityStatus] != NotReachable);

}

// 是否3G

+ (BOOL) IsEnable3G {

return ([[Reachability reachabilityForInternetConnection] currentReachabilityStatus] != NotReachable);

}

例子：

- (void)viewWillAppear:(BOOL)animated {

if (([Reachability reachabilityForInternetConnection].currentReachabilityStatus == NotReachable) &&

([Reachability reachabilityForLocalWiFi].currentReachabilityStatus == NotReachable)) {

self.navigationItem.hidesBackButton = YES;

[self.navigationItem setLeftBarButtonItem:nil animated:NO];

}

}

4. 链接状态的实时通知

网络连接状态的实时检查，通知在网络应用中也是十分必要的。接续状态发生变化时，需要及时地通知用户：

Reachability 1.5版本

// My.AppDelegate.h

#import "Reachability.h"

@interface MyAppDelegate : NSObject {

NetworkStatus remoteHostStatus;

}

@property NetworkStatus remoteHostStatus;

@end

// My.AppDelegate.m

#import "MyAppDelegate.h"

@implementation MyAppDelegate

@synthesize remoteHostStatus;

// 更新网络状态

- (void)updateStatus {

self.remoteHostStatus = [[Reachability sharedReachability] remoteHostStatus];

}

// 通知网络状态

- (void)reachabilityChanged:(NSNotification *)note {

[self updateStatus];

if (self.remoteHostStatus == NotReachable) {

UIAlertView *alert = [[UIAlertView alloc] initWithTitle:NSLocalizedString(@"AppName", nil)

message:NSLocalizedString (@"NotReachable", nil)

delegate:nil cancelButtonTitle:@"OK" otherButtonTitles: nil];

[alert show];

[alert release];

}

}

// 程序启动器，启动网络监视

- (void)applicationDidFinishLaunching:(UIApplication *)application {

// 设置网络检测的站点

[[Reachability sharedReachability] setHostName:@"www.apple.com"];

[[Reachability sharedReachability] setNetworkStatusNotificationsEnabled:YES];

// 设置网络状态变化时的通知函数

[[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(reachabilityChanged:)

name:@"kNetworkReachabilityChangedNotification" object:nil];

[self updateStatus];

}

- (void)dealloc {

// 删除通知对象

[[NSNotificationCenter defaultCenter] removeObserver:self];

[window release];

[super dealloc];

}

Reachability 2.0版本

// MyAppDelegate.h

@class Reachability;

@interface MyAppDelegate : NSObject {

Reachability  *hostReach;

}

@end

// MyAppDelegate.m

- (void)reachabilityChanged:(NSNotification *)note {

Reachability* curReach = [note object];

NSParameterAssert([curReach isKindOfClass: [Reachability class]]);

NetworkStatus status = [curReach currentReachabilityStatus];

if (status == NotReachable) {

UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"AppName""

message:@"NotReachable"

delegate:nil

cancelButtonTitle:@"YES" otherButtonTitles:nil];

[alert show];

[alert release];

}

}

- (void)applicationDidFinishLaunching:(UIApplication *)application {

// …

// 监测网络情况

[[NSNotificationCenter defaultCenter] addObserver:self

selector:@selector(reachabilityChanged:)

name: kReachabilityChangedNotification

object: nil];

hostReach = [[Reachability reachabilityWithHostName:@"www.google.com"] retain];

hostReach startNotifer];

// …

}

二：使用NSConnection下载数据

1.创建NSConnection对象，设置委托对象

NSMutableURLRequest *request = [NSMutableURLRequest requestWithURL:[NSURL URLWithString:[self urlString]]];

[NSURLConnection connectionWithRequest:request delegate:self];

2. NSURLConnection delegate委托方法

- (void)connection:(NSURLConnection *)connection didReceiveResponse:(NSURLResponse *)response;

- (void)connection:(NSURLConnection *)connection didFailWithError:(NSError *)error;

- (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data;

- (void)connectionDidFinishLoading:(NSURLConnection *)connection;

3. 实现委托方法

- (void)connection:(NSURLConnection *)connection didReceiveResponse:(NSURLResponse *)response {

// store data

[self.receivedData setLength:0];            //通常在这里先清空接受数据的缓存

}

- (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data {

/* appends the new data to the received data */

[self.receivedData appendData:data];        //可能多次收到数据，把新的数据添加在现有数据最后

}

- (void)connection:(NSURLConnection *)connection didFailWithError:(NSError *)error {

// 错误处理

}

- (void)connectionDidFinishLoading:(NSURLConnection *)connection {

// disconnect

[UIApplication sharedApplication].networkActivityIndicatorVisible = NO;

NSString *returnString = [[NSString alloc] initWithData:self.receivedData encoding:NSUTF8StringEncoding];

NSLog(returnString);

[self urlLoaded:[self urlString] data:self.receivedData];

firstTimeDownloaded = YES;

}

三：使用NSXMLParser解析xml文件

1. 设置委托对象，开始解析

NSXMLParser *parser = [[NSXMLParser alloc] initWithData:data];   //或者也可以使用initWithContentsOfURL直接下载文件，但是有一个原因不这么做：

// It's also possible to have NSXMLParser download the data, by passing it a URL, but this is not desirable

// because it gives less control over the network, particularly in responding to connection errors.

[parser setDelegate:self];

[parser parse];

2. 常用的委托方法

- (void)parser:(NSXMLParser *)parser didStartElement:(NSString *)elementName

namespaceURI:(NSString *)namespaceURI

qualifiedName:(NSString *)qName

attributes:(NSDictionary *)attributeDict;

- (void)parser:(NSXMLParser *)parser didEndElement:(NSString *)elementName

namespaceURI:(NSString *)namespaceURI

qualifiedName:(NSString *)qName;

- (void)parser:(NSXMLParser *)parser foundCharacters:(NSString *)string;

- (void)parser:(NSXMLParser *)parser parseErrorOccurred:(NSError *)parseError;

static NSString *feedURLString = @"http://www.yifeiyang.net/test/test.xml";

3.  应用举例

- (void)parseXMLFileAtURL:(NSURL *)URL parseError:(NSError **)error

{

NSXMLParser *parser = [[NSXMLParser alloc] initWithContentsOfURL:URL];

[parser setDelegate:self];

[parser setShouldProcessNamespaces:NO];

[parser setShouldReportNamespacePrefixes:NO];

[parser setShouldResolveExternalEntities:NO];

[parser parse];

NSError *parseError = [parser parserError];

if (parseError && error) {

*error = parseError;

}

[parser release];

}

- (void)parser:(NSXMLParser *)parser didStartElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI

qualifiedName:(NSString*)qName attributes:(NSDictionary *)attributeDict{

// 元素开始句柄

if (qName) {

elementName = qName;

}

if ([elementName isEqualToString:@"user"]) {

// 输出属性值

NSLog(@"Name is %@ , Age is %@", [attributeDict objectForKey:@"name"], [attributeDict objectForKey:@"age"]);

}

}

- (void)parser:(NSXMLParser *)parser didEndElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI

qualifiedName:(NSString *)qName

{

// 元素终了句柄

if (qName) {

elementName = qName;

}

}

- (void)parser:(NSXMLParser *)parser foundCharacters:(NSString *)string

{

// 取得元素的text

}

NSError *parseError = nil;