《逆向工程核心原理》第30章 记事本WriteFile() API钩取

原文是在x86下，而在x64下函数调用方式为fastcall，前4个参数保存在寄存器中。在原代码基础上进行修改：

1 // myhookdbg.cpp : 此文件包含 "main" 函数。程序执行将在此处开始并结束。
2 //
3
4 #include "pch.h"
5 #include
6 #include
7 #include
8 #include
9 #include
10 #include
11
12
13 LPVOID g_pfWriteFile = NULL;
14 CREATE_PROCESS_DEBUG_INFO g_cpdi;
15 BYTE g_chINT3 = 0xCC, g_chOrgByte = 0;
16 BOOL OnCreateProcessDebugEvent(LPDEBUG_EVENT pde)
17 {
18 // 查找API地址
19 HMODULE dll = GetModuleHandleA("kernel32.dll");
20 g_pfWriteFile = GetProcAddress(dll, "WriteFile");
21 //g_pfWriteFile =(LPVOID)0x7ffca76b2500;
22 printf("kernel32.dll基址：%I64x\n", dll);
23 printf("WriteFile地址：%I64x\n", (DWORD64 )g_pfWriteFile);
24 // API Hook - WriteFile()
25 // 将byte更改为0xCC (INT 3)
26 // orginal byte是备份
27 memcpy(&g_cpdi, &pde->u.CreateProcessInfo, sizeof(CREATE_PROCESS_DEBUG_INFO));
28 ReadProcessMemory(g_cpdi.hProcess, g_pfWriteFile,
29 &g_chOrgByte, sizeof(BYTE), NULL);
30 printf("原api调用处字节:%x\n", g_chOrgByte);
31 WriteProcessMemory(g_cpdi.hProcess, g_pfWriteFile,
32 &g_chINT3, sizeof(BYTE), NULL);
33 BYTE arr[10];
34 ReadProcessMemory(g_cpdi.hProcess, g_pfWriteFile,
35 arr, sizeof(BYTE)*10, NULL);
36 printf("修改后：\n");
37 for (int i = 0; i < 10; i++) 38 printf("%02x ", arr[i]); 39 printf("\n"); 40 return TRUE; 41 } 42 43 BOOL OnExceptionDebugEvent(LPDEBUG_EVENT pde) 44 { 45 CONTEXT ctx; 46 PBYTE lpBuffer = NULL; 47 DWORD i; 48 ULONG_PTR dwNumOfBytesToWrite, dwAddrOfBuffer; 49 PEXCEPTION_RECORD64 per =(PEXCEPTION_RECORD64)&pde->u.Exception.ExceptionRecord;
50
51 // BreakPoint exception (INT 3) 的情况
52 if (EXCEPTION_BREAKPOINT == per->ExceptionCode)
53 {
54 // 如果BP地址是WriteFile，
55 if ((DWORD64)g_pfWriteFile == per->ExceptionAddress)
56 {
57 printf("发现writefile调用,地址：%I64X\n", g_pfWriteFile);
58 // #1. Unhook
59 // 如果BP地址是WriteFile(用0xCC覆盖的部分返回original byte)
60 WriteProcessMemory(g_cpdi.hProcess, g_pfWriteFile,
61 &g_chOrgByte, sizeof(BYTE), NULL);
62 BYTE arr[10];
63 ReadProcessMemory(g_cpdi.hProcess, g_pfWriteFile,
64 arr, sizeof(BYTE)*10, NULL);
65 printf("恢复后:");
66 for (int i = 0; i < 10; i++) 67 printf("%02x ", arr[i]); 68 printf("\n"); 69 // #2. 寻求Thread Context 70 //ctx.ContextFlags = CONTEXT_CONTROL;SegSs栈段, Rsp, SegCs代码段, Rip, and EFlags 71 ctx.ContextFlags = CONTEXT_FULL;//要获得全部寄存器 72 GetThreadContext(g_cpdi.hThread, &ctx); 73 LPOVERLAPPED arg5_lpOverlapped = NULL; 74 ReadProcessMemory(g_cpdi.hProcess, (LPVOID)(ctx.Rsp + 0x28), &arg5_lpOverlapped, sizeof(DWORD), NULL); 75 printf("寄存器数据：\n"); 76 //printf("rax:%I64x\n", ctx.Rax); 77 //printf("rbx:%I64x\n", ctx.Rbx); 78 printf("rcx:%I64x\n", ctx.Rcx); 79 printf("rdx:%I64x\n", ctx.Rdx); 80 printf("r8:%I64x\n", ctx.R8); 81 printf("r9:%I64x\n", ctx.R9); 82 printf("arg5:%I64x\n",arg5_lpOverlapped); 83 84 85 // #3.获取param 2和3的值 86 // x86函数参数存在于此进程的栈中;x64 fastcall 前4个参数存在寄存器中 87 // LPCVOID lpBuffer,//数据缓存区指针 rdx 88 // DWORD nNumberOfBytesToWrite,//你要写的字节数 r8 89 // param 2 : rdx 90 // param 3 : r8 91 92 //ReadProcessMemory(g_cpdi.hProcess, (LPVOID)(ctx.esp + 0x8),&dwAddrOfBuffer, sizeof(DWORD), NULL); 93 //ReadProcessMemory(g_cpdi.hProcess, (LPVOID)(ctx.esp + 0xC),&dwNumOfBytesToWrite, sizeof(DWORD), NULL); 94 dwAddrOfBuffer = ctx.Rdx; 95 dwNumOfBytesToWrite = ctx.R8; 96 //printf("%s\n", dwAddrOfBuffer); 97 // #4. 临时缓冲配额 98 lpBuffer = (PBYTE)malloc(dwNumOfBytesToWrite + 1); 99 memset(lpBuffer, 0, dwNumOfBytesToWrite + 1); 100 101 // #5. 将WriteFile的缓冲复制到临时缓冲 102 ReadProcessMemory(g_cpdi.hProcess, (LPVOID)dwAddrOfBuffer, 103 lpBuffer, dwNumOfBytesToWrite, NULL); 104 printf("\n### original string ###\n%s\n", lpBuffer); 105 106 // #6.小写->大写转换
107 for (i = 0; i < dwNumOfBytesToWrite; i++) 108 { 109 if (0x61 <= lpBuffer[i] && lpBuffer[i] <= 0x7A) 110 lpBuffer[i] -= 0x20; 111 } 112 113 printf("\n### converted string ###\n%s\n", lpBuffer); 114 115 // #7. 将转换后的缓冲复制到WriteFile的缓冲 116 WriteProcessMemory(g_cpdi.hProcess, (LPVOID)dwAddrOfBuffer, 117 lpBuffer, dwNumOfBytesToWrite, NULL); 118 //ctx.Rdx= 119 // #8. 取消临时缓冲 120 free(lpBuffer); 121 122 // #9.将Thread Context的EIP更改为WriteFile() 123 // (现在已经过WriteFile() + 1) 124 125 //BOOL WriteFile( 126 // HANDLE hFile,//文件句柄 rcx 127 // LPCVOID lpBuffer,//数据缓存区指针 rdx 128 // DWORD nNumberOfBytesToWrite,//你要写的字节数 r8 129 // LPDWORD lpNumberOfBytesWritten,//用于保存实际写入字节数的存储区域的指针 r9 130 // LPOVERLAPPED lpOverlapped//OVERLAPPED结构体指针 rsp+0x20 [call 前rsp 0 8 10 18 20 28] 131 //); 132 /*ctx.Rdx += 1; 133 ctx.R8 -= 1;*/ 134 ctx.Rip =(DWORD64)g_pfWriteFile; 135 //ctx.Eip = (DWORD)g_pfWriteFile; 136 SetThreadContext(g_cpdi.hThread, &ctx); 137 138 // #10. Debuggee 运行被调试进程 139 ContinueDebugEvent(pde->dwProcessId, pde->dwThreadId, DBG_CONTINUE);
140 Sleep(0);
141 printf("continue\n");
142 // #11. API Hook
143 WriteProcessMemory(g_cpdi.hProcess, g_pfWriteFile,&g_chINT3, sizeof(BYTE), NULL);
144
145 return TRUE;
146 }
147 }
148
149 return FALSE;
150 }
151
152 void DebugLoop()
153 {
154 DEBUG_EVENT de;
155 DWORD dwContinueStatus;
156
157 // 从Debuggee等待event的到来。
158 while (WaitForDebugEvent(&de, INFINITE))
159 {
160 dwContinueStatus = DBG_CONTINUE;
161
162 // 创建Debuggee进程或attach事件
163 if (CREATE_PROCESS_DEBUG_EVENT == de.dwDebugEventCode)
164 {
165 OnCreateProcessDebugEvent(&de);
166 printf("finish creat debuggee\n");
167 }
168 // 异常活动
169 else if (EXCEPTION_DEBUG_EVENT == de.dwDebugEventCode)
170 {
171 if (OnExceptionDebugEvent(&de))
172 continue;
173 }
174 // Debuggee进程退出事件
175 else if (EXIT_PROCESS_DEBUG_EVENT == de.dwDebugEventCode)
176 {
177 // debuggee结束-> debugger结束
178 break;
179 }
180
181 // Debuggee的恢复执行。
182 ContinueDebugEvent(de.dwProcessId, de.dwThreadId, dwContinueStatus);
183 }
184 }
185
186 int main()
187 {
188 //system("tasklist");
189 system("tasklist | findstr notepad");
190 char pid[10];
191 printf("输入要注入的进程pid：\n");
192 scanf_s("%s", pid, 10);
193
194 DWORD dwPID;
195 dwPID = atoi(pid);
196 if (!DebugActiveProcess(dwPID))
197 {
198 printf("DebugActiveProcess(%d) failed!!!\n"
199 "Error Code = %d\n", dwPID, GetLastError());
200 return 1;
201 }
202
203 // 调试器循环
204 DebugLoop();
205 system("pause");
206 return 0;
207 /*std::cout << "Hello World!\n"; */ 208 } 209 210 // 运行程序: Ctrl + F5 或调试 >“开始执行(不调试)”菜单
211 // 调试程序: F5 或调试 >“开始调试”菜单
212
213 // 入门提示:
214 // 1. 使用解决方案资源管理器窗口添加/管理文件
215 // 2. 使用团队资源管理器窗口连接到源代码管理
216 // 3. 使用输出窗口查看生成输出和其他消息
217 // 4. 使用错误列表窗口查看错误
218 // 5. 转到“项目”>“添加新项”以创建新的代码文件，或转到“项目”>“添加现有项”以将现有代码文件添加到项目
219 // 6. 将来，若要再次打开此项目，请转到“文件”>“打开”>“项目”并选择 .sln 文件

vs2017