H3C S3100V2-52TP-WiNet参数  使用手册
三层交换机

默认管理IP:192.168.0.234

将电脑IP设置为192.168.0.0这一组，网络连接交换机，默认用户名密码都为admin

CONSOLE连接：SERIAL  COM1 9600  数据位8  流控都不选

WEB登录添加IPV4 ACL 3008 高级设置

h3c登录WEB,打开QOS-ACL IPV4:新建3008（高级访问控制），点击“高级配置”，选择访问控制列表：3008:
a添加时间段A1
a操作“禁止”，协议（TCP) ,TCP/UDP端口：源等于 2425,目的操作等于2425,选择时间段A1,点击“新建”按钮
b操作“禁止”，协议（UDP) ,TCP/UDP端口：源等于 2425,目的操作等于2425,选择时间段A1,点击“新建”按钮

[H3C]display ACL ALL
Advanced ACL  3008, named -none-, 2 rules,
ACL's step is 5
 rule 0 deny tcp established source-port eq 2425 destination-port eq 2425 time-range A1 (Active)
 rule 5 deny udp source-port eq 2425 destination-port eq 2425 time-range A1 (Active)

]interface Ethernet 1/0/1
[H3C-Ethernet1/0/1]packet-filter 3008 INBOUND
[H3C-Ethernet1/0/1]QUIT
[H3C]interface Ethernet 1/0/2 
[H3C-Ethernet1/0/2]packet-filter 3008 INBOUND
[H3C-Ethernet1/0/2]QUIT
[H3C]interface Ethernet 1/0/4 
[H3C-Ethernet1/0/4]packet-filter 3008 INBOUND
[H3C-Ethernet1/0/4]QUIT
[H3C]interface Ethernet 1/0/5 
[H3C-Ethernet1/0/5]packet-filter 3008 INBOUND
[H3C-Ethernet1/0/5]QUIT
[H3C]interface Ethernet 1/0/8 
[H3C-Ethernet1/0/8]packet-filter 3008 INBOUND
[H3C-Ethernet1/0/8]QUIT
[H3C]interface Ethernet 1/0/9 
[H3C-Ethernet1/0/9]packet-filter 3008 INBOUND
[H3C-Ethernet1/0/9]QUIT
[H3C]interface Ethernet 1/0/10
[H3C-Ethernet1/0/10]packet-filter 3008 INBOUND
[H3C-Ethernet1/0/10]QUIT
[H3C]interface Ethernet 1/0/11
[H3C-Ethernet1/0/11]packet-filter 3008 INBOUND
[H3C-Ethernet1/0/11]QUIT