序号
项目
值
1
OS版本
Red Hat Enterprise Linux Server release 7.1 (Maipo)
2
内核版本
3.10.0-229.el7.x86_64
3
Tibco EMS
8.2.0
4
JDK
java version "1.7.0_80"
tibco的配置文件、数据文件都放在/mqdata/cfgmgmt/data目录下面,并且将主节点的该目录通过NFS形式共享给备节点使用。tibco可以开启多个实例。cfgmgmt此处可以根据业务名自己取名。
序号
IP地址
端口
主备
节点文件
1
192.168.9.216
7222
主
/mqdata/cfgmgmt/data
2
192.168.9.217
7222
备
/mqdata/cfgmgmt/data(NFS挂载)
创建tibco用户
[root@elk02 ~]# groupadd -g 800 tibco
[root@elk02 ~]# useradd -u 801 -g tibco -d /home/tibco/ tibco -s /bin/bash
useradd: warning: the home directory already exists.
Not copying any file from skel directory into it.
Creating mailbox file: File exists
[root@elk02 ~]# grep tibco /etc/passwd
tibco❌801:800::/home/tibco/:/bin/bash
创建tibco程序目录和数据目录
[root@elk02 ~]# mkdir /opt/tibco
[root@elk02 ~]# mkdir /mqdata
[root@elk02 ~]# chown -R tibco.tibco /mqdata
[root@elk02 ~]# chown -R tibco.tibco /opt/tibco
[root@elk02 ~]# ll -d /mqdata /opt/tibco
drwxr-xr-x 2 tibco tibco 6 Oct 27 10:53 /mqdata
drwxr-xr-x 2 tibco tibco 6 Oct 27 10:52 /opt/tibco
[root@elk02 ~]# ll /opt/tibco/ /mqdata/
/mqdata/:
total 0
/opt/tibco/:
total 0
解压tibco安装包
[root@elk02 ~]# unzip TIB_ems_8.2.0_linux_x86.zip #解压tibco程序到/opt/tibco/目录下面
…
[root@elk02 ~]# ll
total 54768
drwxr-xr-x 2 root root 4096 Oct 28 2014 assemblies
drwxr-xr-x 2 root root 38 Oct 28 2014 licenses
-rw-r--r-- 1 root root 10996 Oct 28 2014 product_ems_8.2.0_FeatureConfig.xml
-rw-r--r-- 1 root root 3060 Oct 28 2014 README.LINUX
-rw-r--r-- 1 root root 2720 Oct 28 2014 TIBCOUniversalInstaller-ems.silent
-rwxr-xr-x 1 root root 54654976 Oct 28 2014 TIBCOUniversalInstaller-lnx-x86.bin
-rw-r--r-- 1 root root 323 Oct 28 2014 TIB_ems_8.2.0_docinfo.html
-rw-r--r-- 1 root root 1394900 Oct 20 2014 TIB_ems_8.2.0_license.pdf
使用以下命令安装,但是报错了,没有java
./TIBCOUniversalInstaller-lnx-x86.bin -console
安装JDK
[root@elk02 tibco]# ll -d /opt/jdk1.8.0_121/
drwxr-xr-x 8 oracle oinstall 4096 Mar 30 2017 /opt/jdk1.8.0_121/
添加JAVA环境变量
[root@elk02 tibco]# tail -6 /etc/profile
JAVA_HOME=/opt/jdk1.8.0_121/
PATH=JAVA_HOME/bin:$JAVA_HOME/jre/bin:$PATH
CLASSPATH=.:$JAVA_HOME/lib:$JAVA_HOME/jre/lib
export JAVA_HOME
export CLASSPATH
export PATH
[root@elk02 tibco]# . /etc/profile #应用配置
[root@elk02 tibco]# java -version
java version "1.8.0_121"
Java(TM) SE Runtime Environment (build 1.8.0_121-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.121-b13, mixed mode)
#再次安装tibco实例
还是报相同的错误,可能不支持JDK1.8,换成1.7的
[root@elk02 ~]# java -version
java version "1.7.0_80"
Java(TM) SE Runtime Environment (build 1.7.0_80-b15)
Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode)
成功安装tibco
[root@elk02 ~]# ./TIBCOUniversalInstaller-lnx-x86.bin -console
Initializing Wizard........
Launching InstallShield Wizard........
Created file /root/.TIBCO/install_2017-10-27.112148/productinfo/tibco_productinfo_beforeinstall.txt
Welcome to the TIBCO Universal Installer
The installation wizard will install the following products on your system.
TIBCO EMS 8.2.0
TIBCO Software Inc.
http://www.tibco.com
Enter '1' to continue or '3' to cancel: [1] 1
END USER LICENSE AGREEMENT
If you have another valid, signed agreement with TIBCO ("Licensor") or a TIBCO
authorized reseller which applies to the specific Licensor Software, Software
Services, Maintenance or Consulting Services, you are downloading, accessing or
otherwise receiving, that other agreement shall control, otherwise by using,
downloading, installing, copying, or accessing Licensor Software, Software
Services, Maintenance or Consulting Services, or by clicking on "I accept" on or
adjacent to the screen where these Terms may be displayed, you hereby agree to
be bound by and accept these Terms. These Terms shall also apply to any
Maintenance or Consulting Services you later acquire from Licensor relating to
the Licensor Software or Software Services.
You may place orders under these Terms by submitting separate Order Form(s).
Capitalized terms used in these Terms and not otherwise defined, are defined at
https://terms.tibco.com/posts/845635-definitions.
Enter '1' to continue reading or '2' to skip reading: [1] 2
Do you agree to the terms of the license agreement?
Enter 'Yes' to agree to the license terms or 'No' to exit this installer: Yes
Enter '1' to continue, '2' to go back to the previous panel, or '3' cancel: [1] 1
Choose the action you wish to perform.
Select an option by entering its number from the list above. [1] 1
Specify Environment Name.
Environment Name cfgmgmt
TIBCO Environment Home Directory: [/opt/tibco] /opt/tibco
Environment Name: cfgmgmt
Environment Location: /opt/tibco
Is this the TIBCO Home environment you want to use? [Yes] Yes
Enter '1' to continue, '2' to go back to the previous panel, or '3' cancel: [1] 1
Choose one or more installation profiles. Installation Profiles
preselect the installation features for you. You will have the
option to customize your selections after making your profile choices.
To select an item, enter its number. Enter '0' when you are finished. 1
To select an item, enter its number. Enter '0' when you are finished. 2
To select an item, enter its number. Enter '0' when you are finished. 3
To select an item, enter its number. Enter '0' when you are finished. 0
Do you want to customize the install feature selections? [Yes] Yes
Choose the features to install.
To select an item, enter its number. Enter '0' when you are finished. 0
1) Development
2) Server
3) Client
TIBCO EMS 8.2.0
[X] EMS Server Baseline
[X] Development Kit
[X] EMS Client Baseline
[X] EMS Source
[ ] Hibernate (For Database Stores)
Do you wish to proceed with the above feature selections?
Enter 'Yes' to proceed or 'No' to make changes. [Yes] Yes
Enter '1' to continue, '2' to go back to the previous panel, or '3' cancel: [1] 1
Please choose a folder to be used as the TIBCO configuration destination for this installation environment. The configuration directory is used to store product configuration information. The folder must not already exist as a configuration destination for another TIBCO installation environment. Subdirectories tibco/cfgmgmt will be appended to this directory.
TIBCO Configuration Directory: [/root/cfgmgmt] /opt
Enter '1' to continue, '2' to go back to the previous panel, or '3' cancel: [1] 1
Pre-Install Summary
The following products will be installed:
EMS Server Baseline
Development Kit
EMS Client Baseline
EMS Source
Installation Environment Details:
Environment Name:
cfgmgmt
Environment Location:
/opt/tibco
Required Disk Space = 52 MB
Available Disk Space = 166 GB
Environment Configuration Directory Location:
/opt/tibco/cfgmgmt
Enter '1' to continue, '2' to go back to the previous panel, or '3' cancel: [1] 1
Checking if there are any product ANT tasks to be run….
Cleaning up…
Installing Component 1 of 1
Installing: TIBCO EMS 8.2.0
Installing assembly: TIBCO EMS Runtime Common Configuration Management
Installing assembly: TIBCO EMS 64bit Runtime
Installing assembly: TIBCO EMS 32bit Runtime
Installing assembly: TIBCO EMS Runtime
Installing assembly: TIBCO EMS Common
Installing assembly: TIBCO EMS 64bit Development
Installing assembly: TIBCO EMS 32bit Development
Installing assembly: TIBCO EMS Common Development
Installing assembly: product_tibco_ems_64bit_client_runtime
Installing assembly: product_tibco_ems_32bit_client_runtime
Installing assembly: assembly_tibco_com_tibco_tpcl_javax_jms_feature
Installing assembly: assembly_tibco_com_tibco_jms_jmsclient_feature
Installing assembly: TIBCO EMS Common Runtime
Installing assembly: product_tibco_ems_64bit_thirdparty_runtime
Installing assembly: product_tibco_ems_32bit_thirdparty_runtime
Installing assembly: TIBCO EMS Common Samples
Installing assembly: TIBCO EMS Samples
Created file /root/.TIBCO/install_2017-10-27.112148/productinfo/tibco_productinfo_afterinstall.txt
Checking if there are any product ANT tasks to be run….
Checking / Updating machine model….
Current Task: Pre Assembly Ref Installation Steps for EMS Configuration Management Runtime files
Current Task: Pre Assembly Ref Installation Steps for EMS Configuration Management JAAS Runtime files
Current Task: Pre Assembly Ref Installation Steps for EMS Runtime files
Current Task: Pre Assembly Ref Installation Steps for EMS 64bit Runtime files
Current Task: Pre Assembly Ref Installation Steps for EMS 32bit Runtime files
Current Task: Pre Assembly Ref Installation Steps for EMS 64bit Client Only Runtime files
Current Task: Pre Assembly Ref Installation Steps for EMS 32bit Client Only Runtime files
Cleaning up…
Checking if there are any product ANT tasks to be run….
Cleaning up…
Post-Install Summary
The following products and features have been installed:
EMS Server Baseline
Development Kit
EMS Client Baseline
EMS Source
Installation Environment Details:
Environment Name:
cfgmgmt
Environment Location:
/opt/tibco
Configuration Directory Location:
/opt/tibco/cfgmgmt
For more detailed information, the installation logs file are located at:
/root/.TIBCO/install_2017-10-27.112148
Press 'Enter' to exit the installer. [ ]
#安装完成,tibco下有这些目录
[root@elk02 tibco]# cd /opt/tibco/
[root@elk02 tibco]# ll
total 0
drwxr-xr-x 3 root root 16 Oct 27 11:26 cfgmgmt #cfgmgmt/ems/data/是配置文件和数据文件目录,如果是单实例,直接用这个是可以的】
drwxr-xr-x 3 root root 19 Oct 27 11:26 components
drwxr-xr-x 3 root root 16 Oct 27 11:26 ems
_drwxr-xr-x 3 root root 63 Oct 27 11:26 _installInfo
drwxr-xr-x 2 root root 71 Oct 27 11:26 release_notes
_________drwxr-xr-x 6 root root 75 Oct 27 11:26 tools
在主上的/etc/exports文件中添加如下内容:
/mqdata 192.168.9.216/32(rw)
#启动NFS
[root@elk02 conf]# systemctl start rpcbind
[root@elk02 conf]# systemctl start nfs
[root@elk02 conf]# showmount -e 127.0.0.1
Export list for 127.0.0.1:
/mqdata 192.168.9.216/32
#在192.168.9.216上挂载
[root@elk01 ~]# mount 192.168.9.217:/mqdata /mqdata
[root@elk01 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/rhel-root 50G 2.5G 48G 5% /
devtmpfs 16G 0 16G 0% /dev
tmpfs 16G 0 16G 0% /dev/shm
tmpfs 16G 1.6G 15G 10% /run
tmpfs 16G 0 16G 0% /sys/fs/cgroup
/dev/mapper/rhel-opt 167G 1.9G 166G 2% /opt
/dev/mapper/rhel-home 20G 117M 20G 1% /home
/dev/sda1 497M 121M 377M 25% /boot
/dev/mapper/rhel-var 20G 5.3G 15G 27% /var
/dev/mapper/rhel-tmp 10G 724M 9.3G 8% /tmp
tmpfs 3.2G 0 3.2G 0% /run/user/0
192.168.9.217:/mqdata 50G 3.1G 47G 7% /mqdata
主节点配置
创建配置文件目录
[root@elk02 mqdata]# mkdir -p cfgmgmt/data
[root@elk02 data]# mkdir logs conf datastore
[root@elk02 mqdata]# cp -rp /opt/tibco/cfgmgmt/ems/data/* cfgmgmt/data/conf
[root@elk02 mqdata]# cd cfgmgmt/data/conf
[root@elk02 conf]# ll
total 112
-rw-r--r-- 1 root root 1031 Oct 27 2014 acl.conf
-rw-r--r-- 1 root root 2658 Oct 27 2014 bridges.conf
-rw-r--r-- 1 root root 2643 Oct 27 2014 channels.conf
drwxr-xr-x 2 root root 6 Oct 27 11:26 datastore
-rw-r--r-- 1 root root 1084 Oct 27 2014 durables.conf
-rw-r--r-- 1 root root 4129 Oct 27 2014 factories.conf
-rw-r--r-- 1 root root 971 Oct 27 2014 groups.conf
-rw-r--r-- 1 root root 204 Oct 27 2014 jaas_config.txt
-rw-r--r-- 1 root root 3161 Oct 27 2014 queues.conf
-rw-r--r-- 1 root root 1326 Oct 27 2014 routes.conf
drwxr-xr-x 2 root root 6 Oct 27 11:26 routestore-1
drwxr-xr-x 2 root root 6 Oct 27 11:26 routestore-2
-rw-r--r-- 1 root root 2116 Oct 27 2014 stores.conf
-rw-r--r-- 1 root root 10360 Oct 27 11:26 tibemsd.conf
-rw-r--r-- 1 root root 10510 Oct 27 2014 tibemsd.conf_template
-rw-r--r-- 1 root root 11993 Oct 27 11:26 tibemsd-jaas.conf
-rw-r--r-- 1 root root 12155 Oct 27 2014 tibemsd-jaas.conf_template
-rw-r--r-- 1 root root 2495 Oct 27 2014 tibrvcm.conf
-rw-r--r-- 1 root root 2757 Oct 27 2014 topics.conf
-rw-r--r-- 1 root root 4654 Oct 27 2014 transports.conf
-rw-r--r-- 1 root root 1051 Oct 27 2014 users.conf
#创建主备配置文件
[root@elk02 conf]# cp tibemsd.conf tibemsd-master.conf #主配置文件
[root@elk02 conf]# cp tibemsd.conf tibemsd-slave.conf #备配置文件
修改主配置文件
[root@elk02 conf]# egrep -v "^#|^$" tibemsd-master.conf
server = EMS-SERVER
password =
users = "/mqdata/cfgmgmt/data/conf/users.conf"
groups = "/mqdata/cfgmgmt/data/conf/groups.conf"
topics = "/mqdata/cfgmgmt/data/conf/topics.conf"
queues = "/mqdata/cfgmgmt/data/conf/queues.conf"
acl_list = "/mqdata/cfgmgmt/data/conf/acl.conf"
factories = "/mqdata/cfgmgmt/data/conf/factories.conf"
routes = "/mqdata/cfgmgmt/data/conf/routes.conf"
bridges = "/mqdata/cfgmgmt/data/conf/bridges.conf"
transports = "/mqdata/cfgmgmt/data/conf/transports.conf"
tibrvcm = "/mqdata/cfgmgmt/data/conf/tibrvcm.conf"
durables = "/mqdata/cfgmgmt/data/conf/durables.conf"
channels = "/mqdata/cfgmgmt/data/conf/channels.conf"
stores = "/mqdata/cfgmgmt/data/conf/stores.conf"
store = "/mqdata/cfgmgmt/data/datastore"
max_connections = 0
max_msg_memory = 512MB
msg_swapping = enabled
listen = tcp://192.168.9.217:7222
authorization = disabled
routing = disabled
flow_control = disabled
multicast = disabled
tibrv_transports =
logfile = "/mqdata/cfgmgmt/data/logs/logfile"
logfile_max_size =
log_trace =
console_trace =
server_rate_interval = 1
statistics = enabled
rate_interval = 3
detailed_statistics = NONE
statistics_cleanup_interval = 30
max_stat_memory = 64MB
track_message_ids =
track_correlation_ids =
ft_active = tcp://192.168.9.216:7222
ft_heartbeat =
ft_activation =
ft_reconnect_timeout =
ft_ssl_identity =
ft_ssl_issuer =
ft_ssl_private_key =
ft_ssl_password =
ft_ssl_trusted =
ft_ssl_verify_host =
ft_ssl_verify_hostname =
ft_ssl_expected_hostname=
ft_ssl_ciphers =
ssl_dh_size =
ssl_server_ciphers =
ssl_require_client_cert =
ssl_use_cert_username =
ssl_cert_user_specname = CERTIFICATE_USER
ssl_server_identity =
ssl_server_key =
ssl_password =
ssl_server_issuer =
ssl_server_trusted =
ssl_rand_egd =
修改备配置文件
[root@elk02 conf]# egrep -v "^#|^$" tibemsd-slave.conf
server = EMS-SERVER
password =
users = "/mqdata/cfgmgmt/data/conf/users.conf"
groups = "/mqdata/cfgmgmt/data/conf/groups.conf"
topics = "/mqdata/cfgmgmt/data/conf/topics.conf"
queues = "/mqdata/cfgmgmt/data/conf/queues.conf"
acl_list = "/mqdata/cfgmgmt/data/conf/acl.conf"
factories = "/mqdata/cfgmgmt/data/conf/factories.conf"
routes = "/mqdata/cfgmgmt/data/conf/routes.conf"
bridges = "/mqdata/cfgmgmt/data/conf/bridges.conf"
transports = "/mqdata/cfgmgmt/data/conf/transports.conf"
tibrvcm = "/mqdata/cfgmgmt/data/conf/tibrvcm.conf"
durables = "/mqdata/cfgmgmt/data/conf/durables.conf"
channels = "/mqdata/cfgmgmt/data/conf/channels.conf"
stores = "/mqdata/cfgmgmt/data/conf/stores.conf"
store = "/mqdata/cfgmgmt/data/datastore"
max_connections = 0
max_msg_memory = 512MB
msg_swapping = enabled
listen = tcp://192.168.9.216:7222
authorization = disabled
routing = disabled
flow_control = disabled
multicast = disabled
tibrv_transports =
logfile = "/mqdata/cfgmgmt/data/logs/logfile"
logfile_max_size =
log_trace =
console_trace =
server_rate_interval = 1
statistics = enabled
rate_interval = 3
detailed_statistics = NONE
statistics_cleanup_interval = 30
max_stat_memory = 64MB
track_message_ids =
track_correlation_ids =
ft_active = tcp://192.168.9.217:7222
ft_heartbeat =
ft_activation =
ft_reconnect_timeout =
ft_ssl_identity =
ft_ssl_issuer =
ft_ssl_private_key =
ft_ssl_password =
ft_ssl_trusted =
ft_ssl_verify_host =
ft_ssl_verify_hostname =
ft_ssl_expected_hostname=
ft_ssl_ciphers =
ssl_dh_size =
ssl_server_ciphers =
ssl_require_client_cert =
ssl_use_cert_username =
ssl_cert_user_specname = CERTIFICATE_USER
ssl_server_identity =
ssl_server_key =
ssl_password =
ssl_server_issuer =
ssl_server_trusted =
ssl_rand_egd =
在主/备服务器的目录/home/tibco/tools上同时建立:
vi shutdown.conf,输入以下内容:
info
show queues
shutdown
在主服务器上的/home/tibco/tools目录建立:
vi startEmsServer.sh,输入以下内容:
#!/bin/sh
cd /opt/tibco/ems/8.2/bin/
nohup ./tibemsd64 -config /mqdata/cfgmgmt/data/conf/tibemsd-master.conf &
在主服务器上的/home/tibco/tools目录建立:
vi stopEmsServer.sh,输入以下内容:
注意以上IP地址修改为对应的IP,如果没有密码,则不需要-password参数,下同!
#!/bin/sh
date >> shutdown.log
/opt/tibco/ems/8.2/bin/tibemsadmin -script /home/tibco/tools/shutdown.conf –server tcp://192.168.9.217:7222 -user admin >> shutdown.log
在备服务器上的/home/tibco/tools目录建立:
vi startEmsServer.sh,输入以下内容:
#!/bin/sh
cd /opt/tibco/ems/8.2/bin/
nohup ./tibemsd64 -config /mqdata/cfgmgmt/data/conf/tibemsd-slave.conf &
在备服务器上的/home/tibco/tools目录建立:
vi stopEmsServer.sh,输入以下内容:
#!/bin/sh
date >> shutdown.log
/opt/tibco/ems/8.2/bin/tibemsadmin -script /home/tibco/tools/shutdown.conf –server tcp://192.168.9.216:7222 -user admin >> shutdown.log
主:
[tibco@elk02 tools]$ sh startEmsServer.sh
[tibco@elk02 tools]$ nohup: appending output to ‘/home/tibco/nohup.out’
[tibco@elk02 tools]$ ps -ef | grep tib
root 12695 11574 0 13:47 pts/0 00:00:00 su - tibco
tibco 12696 12695 0 13:47 pts/0 00:00:00 -bash
tibco 13581 1 0 14:22 pts/0 00:00:00 ./tibemsd64 -config /mqdata/cfgmgmt/data/conf/tibemsd-master.conf
tibco 13622 12696 0 14:22 pts/0 00:00:00 ps -ef
tibco 13623 12696 0 14:22 pts/0 00:00:00 grep --color=auto tib
备:
[tibco@elk01 tools]$ sh startEmsServer.sh
[tibco@elk01 tools]$ nohup: appending output to ‘nohup.out’
[tibco@elk01 tools]$ ps -ef | grep tib
root 20093 11786 0 14:16 pts/0 00:00:00 su - tibco
tibco 20094 20093 0 14:16 pts/0 00:00:00 -bash
tibco 20587 1 0 14:18 pts/0 00:00:00 ./tibemsd64 -config /mqdata/cfgmgmt/data/conf/tibemsd-slave.conf
tibco 21778 20094 1 14:23 pts/0 00:00:00 ps -ef
tibco 21779 20094 0 14:23 pts/0 00:00:00 grep --color=auto tib
手机扫一扫
移动阅读更方便
你可能感兴趣的文章