openswan协商流程之（四）：main_inI2_outR2()
1. 序言
main_inI2_outR2()函数是ISAKMP协商过程中第四包的核心处理函数的入口，同时在此处理流程中已经获取到足够的隧道信息，可以生成需要的密钥信息。这里我们主要说明main_inI2_outR2的函数调用关系、处理流程以及对源码的注释分析，关于main_inI2_outR2的上下文环境暂不叙述，留给后面的文章进行更新。
ISAKMP协商报文的处理流程都比较复杂，此函数在协商的报文处理函数中比较复杂的，因此个人学习期间难免有遗漏和理解错误的地方，请大家多多批评指正。
对于源码的学习，我并没有把每一行进行备注，而是将自己认为的关键点做了注释或者标注。
2.函数调用关系
暂略。(此流程调用比较多，后面会在补充上)
3. 第四个报文流程图
第四个报文处理流程大致可以划分为四类功能：
- 解析收到的第三个报文内容
- 生成随机数(本段的KE和Nonce值)
- 构造应答报文
- 使用DH算法制作秘钥(三把钥匙)
整理的处理流程如下：
个人觉得这个流程做的还是很清晰和准确的(原谅我没有上色)
4. main_inI2_outR2源码分析
stf_status
main_inI2_outR2(struct msg_digest *md)
{
struct state *const st = md->st;
pb_stream *keyex_pbs = &md->chain[ISAKMP_NEXT_KE]->pbs;
/* if we are already processing a packet on this st, we will be unable
* to start another crypto operation below */
if (is_suspended(st)) {/*为了方式该流程处理时间过长导致对端超时重发*/
openswan_log("%s: already processing a suspended cyrpto operation "
"on this SA, duplicate will be dropped.", __func__);
return STF_TOOMUCHCRYPTO;
}
/* KE in *//*从报文中获取KE载荷，并填充到st->st_gi上*/
RETURN_STF_FAILURE(accept_KE(&st->st_gi, "Gi"
, st->st_oakley.group, keyex_pbs));
/* Ni in *//*从报文中获取Nonce载荷，并填充到st->st_ni上*/
RETURN_STF_FAILURE(accept_v1_nonce(md, &st->st_ni, "Ni"));
/* decode certificate requests *//*解析证书载荷，以链表的方式存储在st->st_connection->requested_ca*/
ikev1_decode_cr(md, &st->st_connection->ikev1_requested_ca_names);
if(st->st_connection->requested_ca != NULL)
{
st->hidden_variables.st_got_certrequest = TRUE;
}
#ifdef NAT_TRAVERSAL
DBG(DBG_NATT
, DBG_log("inI2: checking NAT-T: %d and %d"
, nat_traversal_enabled
, st->hidden_variables.st_nat_traversal));
if (st->hidden_variables.st_nat_traversal & NAT_T_WITH_NATD) {
DBG(DBG_NATT, DBG_log(" NAT_T_WITH_NATD detected"));
nat_traversal_natd_lookup(md);/*根据哈希值确定是否经过NAT;状态上的NAT-T标志在此处做的修改*/
}
if (st->hidden_variables.st_nat_traversal) {/*打印NAT-T、端口浮动相关信息*/
nat_traversal_show_result(st->hidden_variables.st_nat_traversal
, md->sender_port);
}
if (st->hidden_variables.st_nat_traversal & NAT_T_WITH_KA) {
DBG(DBG_NATT, DBG_log(" NAT_T_WITH_KA detected"));
nat_traversal_new_ka_event();/*添加NAT-T的保活事件*/
}
#endif
{
struct ke_continuation *ke = alloc_thing(struct ke_continuation
, "inI2_outR2 KE");
ke->md = md;
set_suspended(st, md);
passert(st->st_sec_in_use == FALSE);
pcrc_init(&ke->ke_pcrc);
ke->ke_pcrc.pcrc_func = main_inI2_outR2_continue;
return build_ke(&ke->ke_pcrc, st
, st->st_oakley.group, st->st_import);
}
}5. nat_traversal_natd_lookup源码分析
/*检查是否需要经过NAT-T*/
void nat_traversal_natd_lookup(struct msg_digest *md)
{
unsigned char hash_me[MAX_DIGEST_LEN];
unsigned char hash_him[MAX_DIGEST_LEN];
struct payload_digest *p;
struct state *st = md->st;
bool found_me = FALSE;
bool found_him= FALSE;
int i;
passert(st);
passert(md->iface);
passert(st->st_oakley.prf_hasher);
/** Count NAT-D **/
for (p = md->chain[ISAKMP_NEXT_NATD_RFC], i=0;
p != NULL;
p = p->next, i++);/*统计NAT-D的数量*/
/**
* We need at least 2 NAT-D (1 for us, many for peer)
*/
if (i < 2) {
loglog(RC_LOG_SERIOUS,
"NAT-Traversal: Only %d NAT-D - Aborting NAT-Traversal negotiation", i);
st->hidden_variables.st_nat_traversal = 0;
return;
}
/**
* First one with my IP & port
*/
_natd_hash(st->st_oakley.prf_hasher, hash_me
, st->st_icookie, st->st_rcookie
, &(md->iface->ip_addr)
, ntohs(md->iface->port));
/**
* The others with sender IP & port
*/
_natd_hash(st->st_oakley.prf_hasher, hash_him
, st->st_icookie, st->st_rcookie
, &(md->sender), ntohs(md->sender_port));
for (p = md->chain[ISAKMP_NEXT_NATD_RFC], i=0;
p != NULL && (!found_me || !found_him);
p = p->next)
{
DBG(DBG_NATT,
DBG_log("NAT_TRAVERSAL hash=%d (me:%d) (him:%d)"
, i, found_me, found_him);
DBG_dump("expected NAT-D(me):", hash_me,
st->st_oakley.prf_hasher->hash_digest_len);
DBG_dump("expected NAT-D(him):", hash_him,
st->st_oakley.prf_hasher->hash_digest_len);
DBG_dump("received NAT-D:", p->pbs.cur, pbs_left(&p->pbs));
);
if ( (pbs_left(&p->pbs) == st->st_oakley.prf_hasher->hash_digest_len)
&& (memcmp(p->pbs.cur, hash_me
, st->st_oakley.prf_hasher->hash_digest_len)==0))
{
found_me = TRUE;/*本端未经过NAT*/
}
if ( (pbs_left(&p->pbs) == st->st_oakley.prf_hasher->hash_digest_len)
&& (memcmp(p->pbs.cur, hash_him
, st->st_oakley.prf_hasher->hash_digest_len)==0))
{
found_him = TRUE;/*对端未经过NAT*/
}
i++;
}
DBG(DBG_NATT,
DBG_log("NAT_TRAVERSAL hash=%d (me:%d) (him:%d)"
, i, found_me, found_him));
if(!found_me) {
st->hidden_variables.st_nat_traversal |= LELEM(NAT_TRAVERSAL_NAT_BHND_ME);/*本端经过NAT*/
st->hidden_variables.st_natd = md->sender;
}
memset(&st->hidden_variables.st_natd,0,sizeof(st->hidden_variables.st_natd));
anyaddr(AF_INET, &st->hidden_variables.st_natd);
if(!found_him) {
st->hidden_variables.st_nat_traversal |= LELEM(NAT_TRAVERSAL_NAT_BHND_PEER);/*对端经过NAT*/
st->hidden_variables.st_natd = md->sender;
}
if(st->st_connection->forceencaps) {/*如果需要强制使用UDP封装双方都需要NAT-D*/
DBG(DBG_NATT,
DBG_log("NAT_TRAVERSAL forceencaps enabled"));
st->hidden_variables.st_nat_traversal |= LELEM(NAT_TRAVERSAL_NAT_BHND_PEER);
st->hidden_variables.st_nat_traversal |= LELEM(NAT_TRAVERSAL_NAT_BHND_ME);
st->hidden_variables.st_natd = md->sender;
}
}6. build_ke源码分析
stf_status build_ke(struct pluto_crypto_req_cont *cn
, struct state *st
, const struct oakley_group_desc *group
, enum crypto_importance importance)
{
struct pluto_crypto_req rd;
struct pluto_crypto_req *r = &rd;
err_t e;
bool toomuch = FALSE;
/*初始化加密请求*/
pcr_init(r, pcr_build_kenonce, importance);
r->pcr_d.kn.oakley_group = group->group;
cn->pcrc_serialno = st->st_serialno;
/*申请制作加密材料请求*/
e= send_crypto_helper_request(r, cn, &toomuch);
if(e != NULL) {/*加密失败*/
loglog(RC_LOG_SERIOUS, "can not start crypto helper: %s", e);
if(toomuch) {
return STF_TOOMUCHCRYPTO;
} else {
return STF_FAIL;
}
} else if(!toomuch) {/*加密任务繁忙，先挂起等待再次调度*/
st->st_calculating = TRUE;
delete_event(st);
event_schedule(EVENT_CRYPTO_FAILED, EVENT_CRYPTO_FAILED_DELAY, st);
return STF_SUSPEND;
} else {
/* we must have run the continuation directly, so
* complete_v1_state_transition already got called.
* 由于我们已经手动执行了main_inR1_outI2_continue(),该函数最终会调用到complete_v1_state_transition
* 因此在(process_v1_state_xxx流程中不必再此执行状态转换函数。因此返回STF_INLINE，当再次到complete_v1_state_transition
*判断返回值为它，则不再执行此函数。)
*/
return STF_INLINE;
}
}7. main_inI2_outR2_continue源码分析
static void
main_inI2_outR2_continue(struct pluto_crypto_req_cont *pcrc
, struct pluto_crypto_req *r
, err_t ugh)
{
struct ke_continuation *ke = (struct ke_continuation *)pcrc;
struct msg_digest *md = ke->md;
struct state *const st = md->st;
stf_status e;
... ...
set_suspended(st, NULL); /* no longer connected or suspended */
set_cur_state(st);
st->st_calculating = FALSE;
e = main_inI2_outR2_tail(pcrc, r);/*构造应答报文*/
if(ke->md != NULL) {
complete_v1_state_transition(&ke->md, e);/*发送报文并完后后续处理工作*/
if(ke->md) release_md(ke->md);
}
reset_cur_state();
}8. main_inI2_outR2_tail源码分析
/*
* this routine gets called after any DH exponentiation that needs to be done
* has been done, and we are ready to send our g^y.
*/
stf_status
main_inI2_outR2_tail(struct pluto_crypto_req_cont *pcrc
, struct pluto_crypto_req *r)
{
struct ke_continuation *ke = (struct ke_continuation *)pcrc;
struct msg_digest *md = ke->md;
struct state *st = md->st;
/* send CR if auth is RSA and no preloaded RSA public key exists*/
bool send_cr = FALSE;
/**************** build output packet HDR;KE;Nr ****************/
/*如果以下四个条件同时满足，则通过需要发送证书。。*/
send_cr = !no_cr_send /*配置中允许发送证书*/
&& (st->st_oakley.auth == OAKLEY_RSA_SIG) /*使用RSA签名*/
&& !has_preloaded_public_key(st) /*未加载未共享秘钥*/
&& st->st_connection->spd.that.ca.ptr != NULL; /*对端证书非空*/
/* HDR out */
echo_hdr(md, FALSE, ISAKMP_NEXT_KE);
/* KE out *//*添加KE载荷，并将其存储在st->st_gr*/
if (!ship_KE(st, r, &st->st_gr
, &md->rbody, ISAKMP_NEXT_NONCE))
{
osw_abort();
return STF_INTERNAL_ERROR;
}
#ifdef DEBUG
{
/* Nr out */
int next_payload;
next_payload = ISAKMP_NEXT_NONE;
if(cur_debugging & IMPAIR_BUST_MR2)
{
next_payload = ISAKMP_NEXT_VID;
}
if(send_cr)
{
next_payload = ISAKMP_NEXT_CR;
}
if (!ship_nonce(&st->st_nr, r
, &md->rbody
, next_payload
, "Nr"))
return STF_INTERNAL_ERROR;
if (cur_debugging & IMPAIR_BUST_MR2)
{
/* generate a pointless large VID payload to push message over MTU */
pb_stream vid_pbs;
if (!out_generic((send_cr)? ISAKMP_NEXT_CR : ISAKMP_NEXT_NONE,
&isakmp_vendor_id_desc, &md->rbody, &vid_pbs))
return STF_INTERNAL_ERROR;
if (!out_zero(1500 /*MTU?*/, &vid_pbs, "Filler VID"))
return STF_INTERNAL_ERROR;
close_output_pbs(&vid_pbs);
}
}
#else
/* Nr out *//*添加NONCE载荷，并将其存储在st->st_nr*/
if (!ship_nonce(&st->st_nr, r
, &md->rbody
, (send_cr)? ISAKMP_NEXT_CR : ISAKMP_NEXT_NONE
, "Nr"))
return STF_INTERNAL_ERROR;
#endif
/* CR out *//*如果需要发送证书*/
if (send_cr)
{
if (st->st_connection->kind == CK_PERMANENT)/*双方连接固定,即两端的IP的确定的*/
{
if (!build_and_ship_CR(CERT_X509_SIGNATURE /*添加对端证书载荷*/
, st->st_connection->spd.that.ca
, &md->rbody, ISAKMP_NEXT_NONE))
return STF_INTERNAL_ERROR;
}
else
{
generalName_t *ca = NULL;
/*查询可用的证书 ???*/
if (collect_rw_ca_candidates(md, &ca))/*收集所有可用证书,并全部加载到ca链表上*/
{
generalName_t *gn;
for (gn = ca; gn != NULL; gn = gn->next)
{
if (!build_and_ship_CR(CERT_X509_SIGNATURE, gn->name/*将所有的可用证书加载到链表上*/
, &md->rbody
, gn->next == NULL ? ISAKMP_NEXT_NONE : ISAKMP_NEXT_CR))
return STF_INTERNAL_ERROR;
}
free_generalNames(ca, FALSE);/*释放可用证书链表*/
}
else
{/*确实没有找到可用的证书，则填充一个空的证书载荷*/
if (!build_and_ship_CR(CERT_X509_SIGNATURE, empty_chunk
, &md->rbody, ISAKMP_NEXT_NONE))
return STF_INTERNAL_ERROR;
}
}
}
#ifdef NAT_TRAVERSAL
if (st->hidden_variables.st_nat_traversal & NAT_T_WITH_NATD) {
if (!nat_traversal_add_natd(ISAKMP_NEXT_NONE, &md->rbody, md))/*添加NAT-D载荷*/
return STF_INTERNAL_ERROR;
}
#endif
/* finish message */
close_message(&md->rbody);
/*********************************************
使 用 DH 算 法 开 始 制 作 密 钥
***********************************************/
/*
* next message will be encrypted, so, we need to have
* the DH value calculated. We can do this in the background,
* sending the reply right away. We have to be careful on the next
* state, since the other end may reply faster than we can calculate
* things. If it is the case, then the packet is placed in the
* continuation, and we let the continuation process it. If there
* is a retransmit, we keep only the last packet.
*
* Also, note that this is not a suspended state, since we are
* actually just doing work in the background.
*
*/
{
/* Looks like we missed perform_dh() declared at
* programs/pluto/pluto_crypt.h as external and implemented nowhere.
* Following code regarding dh_continuation allocation seems useless
* as it's never used. At least, we should free it.
*/
struct dh_continuation *dh = alloc_thing(struct dh_continuation
, "main_inI2_outR2_tail");
stf_status e;
dh->md = NULL;
dh->serialno = st->st_serialno;
pcrc_init(&dh->dh_pcrc);
dh->dh_pcrc.pcrc_func = main_inI2_outR2_calcdone;
passert(st->st_suspended_md == NULL);
DBG(DBG_CONTROLMORE
, DBG_log("main inI2_outR2: starting async DH calculation (group=%d)", st->st_oakley.group->group));
e = start_dh_secretiv(&dh->dh_pcrc, st
, st->st_import
, RESPONDER
, st->st_oakley.group->group);
DBG(DBG_CONTROLMORE,
DBG_log("started dh_secretiv, returned: stf=%s\n"
, stf_status_name(e)));
if(e == STF_FAIL) {
loglog(RC_LOG_SERIOUS, "failed to start async DH calculation, stf=%s\n"
, stf_status_name(e));
return e;
}
/* we are calculating in the background, so it doesn't count */
if(e == STF_SUSPEND) {
st->st_calculating = FALSE;
}
}
return STF_OK;
}9. main_inI2_outR2_calcdone源码分析
static void
main_inI2_outR2_calcdone(struct pluto_crypto_req_cont *pcrc
, struct pluto_crypto_req *r
, err_t ugh)
{
struct dh_continuation *dh = (struct dh_continuation *)pcrc;
struct state *st;
DBG(DBG_CONTROLMORE
, DBG_log("main inI2_outR2: calculated DH finished"));
st = state_with_serialno(dh->serialno);
if(st == NULL) {
openswan_log("state %ld disappeared during crypto\n", dh->serialno);
return;
}
set_cur_state(st);
if(ugh) {
loglog(RC_LOG_SERIOUS, "DH crypto failed: %s\n", ugh);
return;
}
/*将生成的三把秘钥、DH-IV等信息存储在状态上*/
finish_dh_secretiv(st, r);
if(!r->pcr_success) {
loglog(RC_LOG_SERIOUS, "DH crypto failed, invalid keys");
return;
}
ikev2_validate_key_lengths(st);
st->hidden_variables.st_skeyid_calculated = TRUE;
update_iv(st);/*更新IV值*/
/* XXX: Do we need to free dh here? If so, how about the other exits?
* pfree(dh); dh = NULL;
*/
/*
* if there was a packet received while we were calculating, then
* process it now.
*/
/*如果在计算秘钥的过程中收到新的报文则现在再处理该报文*/
if(st->st_suspended_md != NULL) {
struct msg_digest *md = st->st_suspended_md;
set_suspended(st, NULL);
process_packet_tail(&md);
if(md != NULL) {
release_md(md);
}
}
reset_cur_state();
return;
}手机扫一扫
移动阅读更方便
你可能感兴趣的文章