Containing ViewControllers

转自：https://www.cocoanetics.com/2012/04/containing-viewcontrollers/

For a project that I am currently working on I needed to implement a custom container view controller. I was feeling my way forward in the dark for the most part because this does not seem to be a widely used technique. Developers – understandably – favor reusing and skinning existing view controllers over creating new containers.

However there are some scenarios where you should prefer to make your own container because it greatly simplifies your code over trying to bend a UINavigationController or UITabBarController to your will. Do you remember the times when those two where the only two containers available?

I distinctly remember using a UINavigationController with hidden nav bar as a view controller to contain multiple full views. And you probably had do do your own view juggling and animations because for the most part the standard transitions would be useless. Fortunately we can no file this as a fond memory of the past and move on to implementing our own containers.

The first thing to wrap your head around is the notion that besides a hierarchy of views you now also have to have a consistent hierarchy of view controllers. Before iOS 5 people would often create a new view controller and then slap this VC’s view into an existing view hierarchy. Now more!

Nowadays you never would resort to this. Instead you use the mechanisms afforded by UIViewController to add and remove child view controllers.

Another notion is that we’ve trained ourselves to think of view controllers as being responsible for one entire full screen, think of the sub view controllers of a tab bar controller. But ever since UISplitViewController which arrived with the iPad this is no longer the true mantra. Viewcontrollers are supposed to manage a coherent region on the screen, that can be the entire screen for lack of space on an iPhone, but it can also be a content bar at one of the sides of the screen. Like UISplitViewController which has two sub-viewcontrollers, one for the left (“master”) panel and one for the right (“detail”) panel.

UIViewController provides two methods to add a view controller as a child and to remove it later. Those are part of the “UIContainerViewControllerProtectedMethods” category extension for UIViewController:

@interface UIViewController (UIContainerViewControllerProtectedMethods)
 

• (void)addChildViewController:(UIViewController *)childController;
• (void)removeFromParentViewController;
   
  @end

These two methods do exactly what their names suggest. Though what’s not quite obvious is how you are supposed to use them. And if and how you should combine these with addSubview and removeFromSuperview. Hence this exploration. Note: All this assumes we use ARC.

According to the docs it is up to us to define the kinds of relationships we want to model. Be it only a single VC visible at the time like nav controllers, or multiple that can be reached through tabs. Or even multiple VCs that are sort of like pages.

There are three possible things that you want to be able to do with your sub-viewcontrollers that have slightly different semantics:

• Add it to your container
• Remove it from your container
• Transition to another view controller (i.e. add the new and remove the old)

For any of these you also want to be be assured that the 4 view delegate methods get properly called, as well as the new 2 delegate methods that fire before and after a VC moved to a new parent. Note that a parent of nil means that it was removed.

Why is this attention to the delegate messaging necessary? You probably use the view(Did|Will)(A|Disa)pear methods to do some last setup or teardown and so you are interested that they get properly called. And also there is an ugly warning in the console about unbalanced messages if you get something wrong here.

We’ll dive into greater detail with a sample. Let’s say we want to get an effect similar to a tabbed view controller. i.e. we have an array of view controllers and we want to switch between these. Since this container VC will be our app’s root view controller we want to show the first sub-VC when it shows.

Basic Setup

Let’s put the necessary bare bones IVARs in the implementation because we only need to have access to these inside our own ContainerViewController.

@implementation ContainerViewController
{
NSArray *_subViewControllers;
UIViewController *_selectedViewController;
UIView *_containerView;
}

The subVCs will be a static array of view controllers that the developer can set. The selected VC will hold a reference to the currently showing VC and the container view will be the area where we want our sub VC’s view to be positioned. Let’s start by setting up the container view in the container’s loadView:

- (void)loadView
{
// set up the base view
CGRect frame = [[UIScreen mainScreen] applicationFrame];
UIView *view = [[UIView alloc] initWithFrame:frame];
view.autoresizingMask = UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleHeight;
view.backgroundColor = [UIColor blueColor];
 
// set up content view a bit inset
frame = CGRectInset(view.bounds, 0, 100);
_containerView = [[UIView alloc] initWithFrame:frame];
_containerView.backgroundColor = [UIColor redColor];
_containerView.autoresizingMask = UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleHeight;
[view addSubview:_containerView];
 
// from here on the container is automatically adjusting to the orientation
self.view = view;
}

I’ve colored the main view blue and the container view red for clarity. The sub-VCs will go in the red area and be automatically resized if we rotate the device.

The integration in the app delegate is a mere formality, add the import for the header, allocate an instance and set it as root VC.

- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
{
self.window = [[UIWindow alloc] initWithFrame:[[UIScreen mainScreen] bounds]];
 
ContainerViewController *container = [[ContainerViewController alloc] init];
self.window.rootViewController = container;
 
[self.window makeKeyAndVisible];
return YES;
}

Next we need a couple of view controllers to play the role of the sub-VCs. Let’s create a simple UIViewController subclass that has a UILabel as it’s main view, so that we can display something there to tell them apart. Do avoid overcomplicating things for this example we simple take the view’s own description in there. This way we see if the display changes.

- (void)loadView
{
// set up the base view
CGRect frame = [[UIScreen mainScreen] applicationFrame];
UILabel *label = [[UILabel alloc] initWithFrame:frame];
label.numberOfLines = 0; // multiline
label.textAlignment = UITextAlignmentCenter;
 
// let's just have this view description
label.text = [self description];
self.view = label;
}

I bet you never before had a view controller which consisted only of a UILabel. For Science! 

Adding

Next we need to put a couple of these PageViewControllers into an array and have a method that allows us to set this array into our container. Let’s assume that you know how to create a property for the subViewControllers. In the app delegate we have these additional lines:

// make an array of 5 PageVCs
NSMutableArray *tmpArray = [NSMutableArray array];
 
for (int i=0; i<5; i++)
{
PageViewController *page = [[PageViewController alloc] init];
[tmpArray addObject:page];
}
 
// set these as sub VCs
[container setSubViewControllers:tmpArray];

So much for basic setup. Now let’s override the setter for the sub VCs to select the VC at index 0 and present it. Though we cannot present it in the setter, because the view might not have been loaded yet and so our _containerView IVAR is still nil.

- (void)setSubViewControllers:(NSArray *)subViewControllers
{
_subViewControllers = [subViewControllers copy];
 
if (_selectedViewController)
{
// TODO: remove previous VC
}
 
_selectedViewController = [subViewControllers objectAtIndex:0];
 
// cannot add here because the view might not have been loaded yet
}
 
@synthesize subViewControllers = _subViewControllers;

Instead we do it at the latest possible moment, that would be in the viewWillAppear because here we are guaranteed that the loadView has taken place already. A nice lazy thing, if we find that the selected VC already has self as the parent then there’s nothing to do.

- (void)viewWillAppear:(BOOL)animated
{
[super viewWillAppear:animated];
 
if (_selectedViewController.parentViewController == self)
{
// nowthing to do
return;
}
 
// adjust the frame to fit in the container view
_selectedViewController.view.frame = _containerView.bounds;
 
// make sure that it resizes on rotation automatically
_selectedViewController.view.autoresizingMask = _containerView.autoresizingMask;
 
// add as child VC
[self addChildViewController:_selectedViewController];
 
// add it to container view, calls willMoveToParentViewController for us
[_containerView addSubview:_selectedViewController.view];
 
// notify it that move is done
[_selectedViewController didMoveToParentViewController:self];
}

The above shown sequence takes care of calling the viewWillAppear, viewDidAppear, willMoveToParentViewController and didMoveToParentViewController. Notice that all but the last are done for you automatically, but for some strange reason the didMove is not. So we have to do that manually. Upon starting our Demo we now see the VC at index 0.

Next we add the capability to transition from one VC to the next.

Transitioning

To move between the child VCs we’ll add a swipe gesture recognizer to our container. If we swipe left we want to go to the VC with a lower index in the array. If we swipe right we want to go higher. No wrapping. In loadView we add:

// add gesture support
UISwipeGestureRecognizer *swipeLeft = [[UISwipeGestureRecognizer alloc] initWithTarget:self action:@selector(swipeLeft:)];
swipeLeft.direction = UISwipeGestureRecognizerDirectionLeft;
[view addGestureRecognizer:swipeLeft];
 
UISwipeGestureRecognizer *swipeRight = [[UISwipeGestureRecognizer alloc] initWithTarget:self action:@selector(swipeRight:)];
swipeRight.direction = UISwipeGestureRecognizerDirectionRight;
[view addGestureRecognizer:swipeRight];

And the implementation of swipe is as follows. For simplicity’s sake we use two separate gesture recognizers because Apple does not provide an easy way to determine the swipe direction if you combine to directions.

- (void)swipeLeft:(UISwipeGestureRecognizer *)gesture
{
if (gesture.state == UIGestureRecognizerStateRecognized)
{
NSInteger index = [_subViewControllers indexOfObject:_selectedViewController];
index = MIN(index+1, [_subViewControllers count]-1);
 
UIViewController *newSubViewController = [_subViewControllers objectAtIndex:index];
 
[self transitionFromViewController:_selectedViewController toViewController:newSubViewController];
}
}
 

• (void)swipeRight:(UISwipeGestureRecognizer *)gesture
  {
  if (gesture.state == UIGestureRecognizerStateRecognized)
  {
  NSInteger index = [_subViewControllers indexOfObject:_selectedViewController];
  index = MAX(index-1, 0);
   
  UIViewController *newSubViewController = [_subViewControllers objectAtIndex:index];
   
  [self transitionFromViewController:_selectedViewController toViewController:newSubViewController];
  }
  }

The logic to transition from one VC to another we package in transitionFromViewController:toViewController:. This is the really interesting part. There is a convenient method that again takes care of most of the boring work of adding and removing views. And again some non-obvious additional messaging is necessary to get it perfect.

- (void)transitionFromViewController:(UIViewController *)fromViewController toViewController:(UIViewController *)toViewController
{
if (fromViewController == toViewController)
{
// cannot transition to same
return;
}
 
// animation setup
toViewController.view.frame = _containerView.bounds;
toViewController.view.autoresizingMask = _containerView.autoresizingMask;
 
// notify
[fromViewController willMoveToParentViewController:nil];
[self addChildViewController:toViewController];
 
// transition
[self transitionFromViewController:fromViewController
toViewController:toViewController
duration:1.0
options:UIViewAnimationOptionTransitionCurlDown
animations:^{
}
completion:^(BOOL finished) {
[toViewController didMoveToParentViewController:self];
[fromViewController removeFromParentViewController];
}];
}

And with that we have our transitions in the can.

You have a number of UIViewAnimationOptionTransition-s available, but you don’t have to settle for these. You can also pass 0 for the options and instead provide all animations you like the two views to execute in the animations block.

Before I discovered is method I was using the previous method of animating the views. Though this has a side-effect that we might not like in this case. Typically you want the “will” delegate methods to fire before the transition and the “did” to follow afterwards. If you animate the views yourself then iOS 5 will take care of sending these messages for you but it does so together. This looses us the ability to differentiate between stuff we want to do before and after the appearing and disappearing of the view controller.

Conclusion

It took me quite a bit of experimenting to also get all the messaging happening and equally balanced. The above sample has that working as it should.

But once you do figure out the two techniques outlined in this article you are on the road to implement your own view controller containment like you never did anything else.

One thing that I wasn’t able to figure out so far is why the transition method always adds the new view controller’s view to the container view controller’s main view. This simplifes the process somewhat because you don’t have to know at which stage in the transition it is ok to add and remove the views. But at the same time you might have a situation where you don’t want the animation to occur over the entire area of the container view controller.

For this scenario I can only think of covering up the parts with extra sub views. Or we could stack multiple container view controllers and have one to only cover the region where where have the container view. This could then clip its subviews and thus be only care for this area.

The main advantage of any kind of view controller containment is that rotation messages (should|will|did) reach the lowest leaves of your view controller tree. Unless you disable that by means of overriding automaticallyForwardAppearanceAndRotationMethodsToChildViewControllers and returning NO.

But who would really want that when we have waited for so long for public API to have these being forwarded? Working with view controller containers I get a feeling that they greatly simplified creating complex user interfaces consisting of multiple parts.

The project for this tutorial is in my Examples GitHub repository.