megacli修复raid1硬盘

By HKL, Tuesday 27 August 2019, 评论

[ Hardware Operating ]

使用megaraid修复raid1掉线硬盘

使用说明：

查看硬盘状态

~# megacli -PDList -aAll -NoLog | grep 'Firmware state'
Firmware state: Unconfigured(bad)
Firmware state: Online, Spun Up

将Unconfigured(bad)调整为可用的good状态

~# megacli  -PDMakeGood -PhysDrv[252:0] -a0
~# megacli -PDList -aAll -NoLog | grep 'Firmware state'
Firmware state: Unconfigured(good), Spun Up
Firmware state: Online, Spun Up

检查掉线硬盘

~# megacli -pdgetmissing -a0

    Adapter 0 - Missing Physical drives

    No.   Array   Row   Size Expected
    0     0       1     952720 MB

重新导入raid配置，掉线硬盘进入Rebuild

~# megacli  -CfgForeign -Import -a0
~# megacli -PDList -aAll -NoLog | grep 'Firmware state'
Firmware state: Rebuild
Firmware state: Online, Spun Up

~# megacli -PDRbld -ShowProg -PhysDrv[252:0] -aAll

Rebuild Progress on Device at Enclosure 252, Slot 0 Completed 4% in 4 Minutes.

Exit Code: 0x00

Rebuild后硬盘恢复在线

~# megacli  -PDList -a0 |grep "Firmware state"
Firmware state: Online, Spun Up
Firmware state: Online, Spun Up