kubelet之volume manager源码分析
基于tag v1.17.4
https://github.com/kubernetes/kubernetes/releases/tag/v1.17.4
volume manager存在于kubelet中，主要是管理存储卷的attach/detach（与AD controller作用相同，通过kubelet启动参数控制哪个组件来做该操作，后续会详细介绍）、mount/umount等操作。
容器的存储挂载分为两大步：
（1）attach；
（2）mount。
解除容器存储挂载分为两大步：
（1）umount；
（2）detach。
attach/detach操作可以由kube-controller-manager或者kubelet中的volume manager来完成，根据启动参数enable-controller-attach-detach来决定；而mount/umount操作只由kubelet中的volume manager来完成。
（1）运行在kubelet 里让存储Ready的部件，主要是mount/unmount（attach/detach可选）；
（2）pod调度到这个node上后才会有卷的相应操作，所以它的触发端是kubelet（严格讲是kubelet里的pod manager），根据Pod Manager里pod spec里申明的存储来触发卷的挂载操作；
（3）Kubelet会监听到调度到该节点上的pod声明，会把pod缓存到Pod Manager中，VolumeManager通过Pod Manager获取PV/PVC的状态，并进行分析出具体的attach/detach、mount/umount, 操作然后调用plugin进行相应的业务处理。
// pkg/kubelet/volumemanager/volume_manager.go
// VolumeManager runs a set of asynchronous loops that figure out which volumes
// need to be attached/mounted/unmounted/detached based on the pods scheduled on
// this node and makes it so.
type VolumeManager interface {
// Starts the volume manager and all the asynchronous loops that it controls
Run(sourcesReady config.SourcesReady, stopCh <-chan struct{})
// WaitForAttachAndMount processes the volumes referenced in the specified
// pod and blocks until they are all attached and mounted (reflected in
// actual state of the world).
// An error is returned if all volumes are not attached and mounted within
// the duration defined in podAttachAndMountTimeout.
WaitForAttachAndMount(pod *v1.Pod) error
// GetMountedVolumesForPod returns a VolumeMap containing the volumes
// referenced by the specified pod that are successfully attached and
// mounted. The key in the map is the OuterVolumeSpecName (i.e.
// pod.Spec.Volumes[x].Name). It returns an empty VolumeMap if pod has no
// volumes.
GetMountedVolumesForPod(podName types.UniquePodName) container.VolumeMap
// GetExtraSupplementalGroupsForPod returns a list of the extra
// supplemental groups for the Pod. These extra supplemental groups come
// from annotations on persistent volumes that the pod depends on.
GetExtraSupplementalGroupsForPod(pod *v1.Pod) []int64
// GetVolumesInUse returns a list of all volumes that implement the volume.Attacher
// interface and are currently in use according to the actual and desired
// state of the world caches. A volume is considered "in use" as soon as it
// is added to the desired state of world, indicating it *should* be
// attached to this node and remains "in use" until it is removed from both
// the desired state of the world and the actual state of the world, or it
// has been unmounted (as indicated in actual state of world).
GetVolumesInUse() []v1.UniqueVolumeName
// ReconcilerStatesHasBeenSynced returns true only after the actual states in reconciler
// has been synced at least once after kubelet starts so that it is safe to update mounted
// volume list retrieved from actual state.
ReconcilerStatesHasBeenSynced() bool
// VolumeIsAttached returns true if the given volume is attached to this
// node.
VolumeIsAttached(volumeName v1.UniqueVolumeName) bool
// Marks the specified volume as having successfully been reported as "in
// use" in the nodes's volume status.
MarkVolumesAsReportedInUse(volumesReportedAsInUse []v1.UniqueVolumeName)
}（1）desiredStateOfWorld: 集群中期望要达到的数据卷挂载状态，简称DSW。假设集群内新调度了一个Pod，此时要用到volume，Pod被分配到某节点NodeA上。 此时，对于AD controller来说，DSW中节点NodeA应该有被分配的volume在准备被这个Pod挂载。
（2）actualStateOfWorld: 集群中实际存在的数据卷挂载状态，简称ASW。实际状态未必是和期望状态一样，比如实际状态Node上有刚调度过来的Pod，但是还没有相应已经attached状态的volume。
actualStateOfWorld相关结构体
actualStateOfWorld
实际存储挂载状态结构体。
actualStateOfWorld: 实际存储挂载状态，简称ASW。包括了已经成功挂载到node节点的存储，以及已经成功挂载该存储的pod列表。
主要属性attachedVolumes，数据结构map，key为已经成功挂载到node的存储名称，value为已经成功挂载到node节点的存储信息。
// pkg/kubelet/volumemanager/cache/actual_state_of_world.go
type actualStateOfWorld struct {
// nodeName is the name of this node. This value is passed to Attach/Detach
nodeName types.NodeName
// attachedVolumes is a map containing the set of volumes the kubelet volume
// manager believes to be successfully attached to this node. Volume types
// that do not implement an attacher interface are assumed to be in this
// state by default.
// The key in this map is the name of the volume and the value is an object
// containing more information about the attached volume.
attachedVolumes map[v1.UniqueVolumeName]attachedVolume
// volumePluginMgr is the volume plugin manager used to create volume
// plugin objects.
volumePluginMgr *volume.VolumePluginMgr
sync.RWMutex
}attachedVolume
主要属性mountedPods，数据结构map，key为pod名称，value为已经成功挂载了该存储的pod列表。
// pkg/kubelet/volumemanager/cache/actual_state_of_world.go
// attachedVolume represents a volume the kubelet volume manager believes to be
// successfully attached to a node it is managing. Volume types that do not
// implement an attacher are assumed to be in this state.
type attachedVolume struct {
// volumeName contains the unique identifier for this volume.
volumeName v1.UniqueVolumeName
// mountedPods is a map containing the set of pods that this volume has been
// successfully mounted to. The key in this map is the name of the pod and
// the value is a mountedPod object containing more information about the
// pod.
mountedPods map[volumetypes.UniquePodName]mountedPod
// spec is the volume spec containing the specification for this volume.
// Used to generate the volume plugin object, and passed to plugin methods.
// In particular, the Unmount method uses spec.Name() as the volumeSpecName
// in the mount path:
// /var/lib/kubelet/pods/{podUID}/volumes/{escapeQualifiedPluginName}/{volumeSpecName}/
spec *volume.Spec
// pluginName is the Unescaped Qualified name of the volume plugin used to
// attach and mount this volume. It is stored separately in case the full
// volume spec (everything except the name) can not be reconstructed for a
// volume that should be unmounted (which would be the case for a mount path
// read from disk without a full volume spec).
pluginName string
// pluginIsAttachable indicates the volume plugin used to attach and mount
// this volume implements the volume.Attacher interface
pluginIsAttachable bool
// globallyMounted indicates that the volume is mounted to the underlying
// device at a global mount point. This global mount point must be unmounted
// prior to detach.
globallyMounted bool
// devicePath contains the path on the node where the volume is attached for
// attachable volumes
devicePath string
// deviceMountPath contains the path on the node where the device should
// be mounted after it is attached.
deviceMountPath string
}mountedPod
pod相关信息。
// pkg/kubelet/volumemanager/cache/actual_state_of_world.go
// The mountedPod object represents a pod for which the kubelet volume manager
// believes the underlying volume has been successfully been mounted.
type mountedPod struct {
// the name of the pod
podName volumetypes.UniquePodName
// the UID of the pod
podUID types.UID
// mounter used to mount
mounter volume.Mounter
// mapper used to block volumes support
blockVolumeMapper volume.BlockVolumeMapper
// spec is the volume spec containing the specification for this volume.
// Used to generate the volume plugin object, and passed to plugin methods.
// In particular, the Unmount method uses spec.Name() as the volumeSpecName
// in the mount path:
// /var/lib/kubelet/pods/{podUID}/volumes/{escapeQualifiedPluginName}/{volumeSpecName}/
volumeSpec *volume.Spec
// outerVolumeSpecName is the volume.Spec.Name() of the volume as referenced
// directly in the pod. If the volume was referenced through a persistent
// volume claim, this contains the volume.Spec.Name() of the persistent
// volume claim
outerVolumeSpecName string
// remountRequired indicates the underlying volume has been successfully
// mounted to this pod but it should be remounted to reflect changes in the
// referencing pod.
// Atomically updating volumes depend on this to update the contents of the
// volume. All volume mounting calls should be idempotent so a second mount
// call for volumes that do not need to update contents should not fail.
remountRequired bool
// volumeGidValue contains the value of the GID annotation, if present.
volumeGidValue string
// fsResizeRequired indicates the underlying volume has been successfully
// mounted to this pod but its size has been expanded after that.
fsResizeRequired bool
}desiredStateOfWorld相关结构体
desiredStateOfWorld
期望存储挂载状态结构体。
desiredStateOfWorld: 期望的存储挂载状态，简称DSW。包括了期望挂载到node节点的存储，以及期望挂载该存储的pod列表。
主要属性volumesToMount，数据结构map，key为期望挂载到该node节点的存储，value为该存储相关信息。
// pkg/kubelet/volumemanager/cache/actual_state_of_world.go
type desiredStateOfWorld struct {
// volumesToMount is a map containing the set of volumes that should be
// attached to this node and mounted to the pods referencing it. The key in
// the map is the name of the volume and the value is a volume object
// containing more information about the volume.
volumesToMount map[v1.UniqueVolumeName]volumeToMount
// volumePluginMgr is the volume plugin manager used to create volume
// plugin objects.
volumePluginMgr *volume.VolumePluginMgr
// podErrors are errors caught by desiredStateOfWorldPopulator about volumes for a given pod.
podErrors map[types.UniquePodName]sets.String
sync.RWMutex
}volumeToMount
主要属性podsToMount，数据结构map，key为pod名称，value为期望挂载该存储的所有pod的相关信息。
// pkg/kubelet/volumemanager/cache/actual_state_of_world.go
// The volume object represents a volume that should be attached to this node,
// and mounted to podsToMount.
type volumeToMount struct {
// volumeName contains the unique identifier for this volume.
volumeName v1.UniqueVolumeName
// podsToMount is a map containing the set of pods that reference this
// volume and should mount it once it is attached. The key in the map is
// the name of the pod and the value is a pod object containing more
// information about the pod.
podsToMount map[types.UniquePodName]podToMount
// pluginIsAttachable indicates that the plugin for this volume implements
// the volume.Attacher interface
pluginIsAttachable bool
// pluginIsDeviceMountable indicates that the plugin for this volume implements
// the volume.DeviceMounter interface
pluginIsDeviceMountable bool
// volumeGidValue contains the value of the GID annotation, if present.
volumeGidValue string
// reportedInUse indicates that the volume was successfully added to the
// VolumesInUse field in the node's status.
reportedInUse bool
// desiredSizeLimit indicates the desired upper bound on the size of the volume
// (if so implemented)
desiredSizeLimit *resource.Quantity
}podToMount
podToMount结构体主要记录了pod信息。
// pkg/kubelet/volumemanager/cache/actual_state_of_world.go
// The pod object represents a pod that references the underlying volume and
// should mount it once it is attached.
type podToMount struct {
// podName contains the name of this pod.
podName types.UniquePodName
// Pod to mount the volume to. Used to create NewMounter.
pod *v1.Pod
// volume spec containing the specification for this volume. Used to
// generate the volume plugin object, and passed to plugin methods.
// For non-PVC volumes this is the same as defined in the pod object. For
// PVC volumes it is from the dereferenced PV object.
volumeSpec *volume.Spec
// outerVolumeSpecName is the volume.Spec.Name() of the volume as referenced
// directly in the pod. If the volume was referenced through a persistent
// volume claim, this contains the volume.Spec.Name() of the persistent
// volume claim
outerVolumeSpecName string
}kubelet管理volume的方式基于两个不同的状态：
（1）DesiredStateOfWorld：预期中，volume的挂载情况，简称预期状态。从pod对象中获取预期状态；
（2）ActualStateOfWorld：实际中，voluem的挂载情况，简称实际状态。从node.Status.VolumesAttached获取实际状态，并根据调谐更新实际状态。
Run方法中主要包含了2个方法：
（1）vm.desiredStateOfWorldPopulator.Run
（2）vm.reconciler.Run
下面将一一分析。
// pkg/kubelet/volumemanager/volume_manager.go
func (vm *volumeManager) Run(sourcesReady config.SourcesReady, stopCh <-chan struct{}) {
defer runtime.HandleCrash()
// 从apiserver同步pod信息，来更新DesiredStateOfWorld
go vm.desiredStateOfWorldPopulator.Run(sourcesReady, stopCh)
klog.V(2).Infof("The desired_state_of_world populator starts")
klog.Infof("Starting Kubelet Volume Manager")
// 预期状态和实际状态的协调者，负责调整实际状态至预期状态
go vm.reconciler.Run(stopCh)
metrics.Register(vm.actualStateOfWorld, vm.desiredStateOfWorld, vm.volumePluginMgr)
if vm.kubeClient != nil {
// start informer for CSIDriver
vm.volumePluginMgr.Run(stopCh)
}
<-stopCh
klog.Infof("Shutting down Kubelet Volume Manager")
}1 vm.desiredStateOfWorldPopulator.Run
主要逻辑为调用dswp.populatorLoop()，根据pod的volume信息，来更新DesiredStateOfWorld；并且不断循环调用该方法，来不断更新DesiredStateOfWorld。
dswp.loopSleepDuration的值为100ms。
// pkg/kubelet/volumemanager/populator/desired_state_of_world_populator.go
func (dswp *desiredStateOfWorldPopulator) Run(sourcesReady config.SourcesReady, stopCh <-chan struct{}) {
// Wait for the completion of a loop that started after sources are all ready, then set hasAddedPods accordingly
klog.Infof("Desired state populator starts to run")
wait.PollUntil(dswp.loopSleepDuration, func() (bool, error) {
done := sourcesReady.AllReady()
dswp.populatorLoop()
return done, nil
}, stopCh)
dswp.hasAddedPodsLock.Lock()
dswp.hasAddedPods = true
dswp.hasAddedPodsLock.Unlock()
wait.Until(dswp.populatorLoop, dswp.loopSleepDuration, stopCh)
}1.1 dswp.populatorLoop()
两个关键方法：
dswp.findAndAddNewPods()：添加volume进DesiredStateOfWorld；
dswp.findAndRemoveDeletedPods()：从DesiredStateOfWorld删除volume。
// pkg/kubelet/volumemanager/populator/desired_state_of_world_populator.go
func (dswp *desiredStateOfWorldPopulator) populatorLoop() {
dswp.findAndAddNewPods()
// findAndRemoveDeletedPods() calls out to the container runtime to
// determine if the containers for a given pod are terminated. This is
// an expensive operation, therefore we limit the rate that
// findAndRemoveDeletedPods() is called independently of the main
// populator loop.
if time.Since(dswp.timeOfLastGetPodStatus) < dswp.getPodStatusRetryDuration {
klog.V(5).Infof(
"Skipping findAndRemoveDeletedPods(). Not permitted until %v (getPodStatusRetryDuration %v).",
dswp.timeOfLastGetPodStatus.Add(dswp.getPodStatusRetryDuration),
dswp.getPodStatusRetryDuration)
return
}
dswp.findAndRemoveDeletedPods()
}1.1.1 dswp.findAndAddNewPods()
主要逻辑：
（1）如果kubelet开启了features.ExpandInUsePersistentVolumes，处理一下map mountedVolumesForPod，用于后续处理标记存储扩容逻辑；
（2）遍历pod列表，调用dswp.processPodVolumes将pod中的volume添加到DesiredStateOfWorld；同时processPodVolumes方法里有标记某存储是否需要扩容的逻辑，用于后续触发存储扩容操作。
// pkg/kubelet/volumemanager/populator/desired_state_of_world_populator.go
// Iterate through all pods and add to desired state of world if they don't
// exist but should
func (dswp *desiredStateOfWorldPopulator) findAndAddNewPods() {
// Map unique pod name to outer volume name to MountedVolume.
mountedVolumesForPod := make(map[volumetypes.UniquePodName]map[string]cache.MountedVolume)
if utilfeature.DefaultFeatureGate.Enabled(features.ExpandInUsePersistentVolumes) {
for _, mountedVolume := range dswp.actualStateOfWorld.GetMountedVolumes() {
mountedVolumes, exist := mountedVolumesForPod[mountedVolume.PodName]
if !exist {
mountedVolumes = make(map[string]cache.MountedVolume)
mountedVolumesForPod[mountedVolume.PodName] = mountedVolumes
}
mountedVolumes[mountedVolume.OuterVolumeSpecName] = mountedVolume
}
}
processedVolumesForFSResize := sets.NewString()
for _, pod := range dswp.podManager.GetPods() {
// pod如果terminated了，则跳过该pod的volume
if dswp.isPodTerminated(pod) {
// Do not (re)add volumes for terminated pods
continue
}
// 将pod中的volume添加到 the desired state of the world
dswp.processPodVolumes(pod, mountedVolumesForPod, processedVolumesForFSResize)
}
}
func (dswp *desiredStateOfWorldPopulator) isPodTerminated(pod *v1.Pod) bool {
podStatus, found := dswp.podStatusProvider.GetPodStatus(pod.UID)
if !found {
podStatus = pod.Status
}
return util.IsPodTerminated(pod, podStatus)
}pod属于terminated的判断看下列代码：
// pkg/volume/util/util.go
// IsPodTerminated checks if pod is terminated
func IsPodTerminated(pod *v1.Pod, podStatus v1.PodStatus) bool {
return podStatus.Phase == v1.PodFailed || podStatus.Phase == v1.PodSucceeded || (pod.DeletionTimestamp != nil && notRunning(podStatus.ContainerStatuses))
}
// notRunning returns true if every status is terminated or waiting, or the status list
// is empty.
func notRunning(statuses []v1.ContainerStatus) bool {
for _, status := range statuses {
if status.State.Terminated == nil && status.State.Waiting == nil {
return false
}
}
return true
}dswp.processPodVolumes()主要逻辑：
（1）调用dswp.podPreviouslyProcessed判断指定pod的volume是否已经被处理过了，处理过则直接返回；
（2）调用dswp.desiredStateOfWorld.AddPodToVolume将pod的volume信息加入desiredStateOfWorld中；
（3）如果开启了features.ExpandInUsePersistentVolumes，则调用dswp.checkVolumeFSResize来标记需要扩容的volume信息；
（4）调用dswp.markPodProcessed标记该pod的volume信息已被处理。
// pkg/kubelet/volumemanager/populator/desired_state_of_world_populator.go
// processPodVolumes processes the volumes in the given pod and adds them to the
// desired state of the world.
func (dswp *desiredStateOfWorldPopulator) processPodVolumes(
pod *v1.Pod,
mountedVolumesForPod map[volumetypes.UniquePodName]map[string]cache.MountedVolume,
processedVolumesForFSResize sets.String) {
if pod == nil {
return
}
uniquePodName := util.GetUniquePodName(pod)
if dswp.podPreviouslyProcessed(uniquePodName) {
return
}
allVolumesAdded := true
mounts, devices := util.GetPodVolumeNames(pod)
expandInUsePV := utilfeature.DefaultFeatureGate.Enabled(features.ExpandInUsePersistentVolumes)
// Process volume spec for each volume defined in pod
for _, podVolume := range pod.Spec.Volumes {
if !mounts.Has(podVolume.Name) && !devices.Has(podVolume.Name) {
// Volume is not used in the pod, ignore it.
klog.V(4).Infof("Skipping unused volume %q for pod %q", podVolume.Name, format.Pod(pod))
continue
}
pvc, volumeSpec, volumeGidValue, err :=
dswp.createVolumeSpec(podVolume, pod.Name, pod.Namespace, mounts, devices)
if err != nil {
klog.Errorf(
"Error processing volume %q for pod %q: %v",
podVolume.Name,
format.Pod(pod),
err)
dswp.desiredStateOfWorld.AddErrorToPod(uniquePodName, err.Error())
allVolumesAdded = false
continue
}
// for local volume
err = dswp.checkLocalVolumePV(pod, volumeSpec)
if err != nil {
klog.Errorf(
"Error processing volume %q for pod %q: %v",
podVolume.Name,
format.Pod(pod),
err)
allVolumesAdded = false
continue
}
// Add volume to desired state of world
_, err = dswp.desiredStateOfWorld.AddPodToVolume(
uniquePodName, pod, volumeSpec, podVolume.Name, volumeGidValue)
if err != nil {
klog.Errorf(
"Failed to add volume %s (specName: %s) for pod %q to desiredStateOfWorld: %v",
podVolume.Name,
volumeSpec.Name(),
uniquePodName,
err)
dswp.desiredStateOfWorld.AddErrorToPod(uniquePodName, err.Error())
allVolumesAdded = false
} else {
klog.V(4).Infof(
"Added volume %q (volSpec=%q) for pod %q to desired state.",
podVolume.Name,
volumeSpec.Name(),
uniquePodName)
}
if expandInUsePV {
dswp.checkVolumeFSResize(pod, podVolume, pvc, volumeSpec,
uniquePodName, mountedVolumesForPod, processedVolumesForFSResize)
}
}
// some of the volume additions may have failed, should not mark this pod as fully processed
if allVolumesAdded {
dswp.markPodProcessed(uniquePodName)
// New pod has been synced. Re-mount all volumes that need it
// (e.g. DownwardAPI)
dswp.actualStateOfWorld.MarkRemountRequired(uniquePodName)
// Remove any stored errors for the pod, everything went well in this processPodVolumes
dswp.desiredStateOfWorld.PopPodErrors(uniquePodName)
}
}再来看一个关键方法checkVolumeFSResize()：
与存储扩容相关，当pv.Spec.Capacity大小大于pvc.Status.Capacity时，将该存储标记为需要扩容
// pkg/kubelet/volumemanager/populator/desired_state_of_world_populator.go
// checkVolumeFSResize checks whether a PVC mounted by the pod requires file
// system resize or not. If so, marks this volume as fsResizeRequired in ASW.
// - mountedVolumesForPod stores all mounted volumes in ASW, because online
// volume resize only considers mounted volumes.
// - processedVolumesForFSResize stores all volumes we have checked in current loop,
// because file system resize operation is a global operation for volume, so
// we only need to check it once if more than one pod use it.
func (dswp *desiredStateOfWorldPopulator) checkVolumeFSResize(
pod *v1.Pod,
podVolume v1.Volume,
pvc *v1.PersistentVolumeClaim,
volumeSpec *volume.Spec,
uniquePodName volumetypes.UniquePodName,
mountedVolumesForPod map[volumetypes.UniquePodName]map[string]cache.MountedVolume,
processedVolumesForFSResize sets.String) {
if podVolume.PersistentVolumeClaim == nil {
// Only PVC supports resize operation.
return
}
uniqueVolumeName, exist := getUniqueVolumeName(uniquePodName, podVolume.Name, mountedVolumesForPod)
if !exist {
// Volume not exist in ASW, we assume it hasn't been mounted yet. If it needs resize,
// it will be handled as offline resize(if it indeed hasn't been mounted yet),
// or online resize in subsequent loop(after we confirm it has been mounted).
return
}
if processedVolumesForFSResize.Has(string(uniqueVolumeName)) {
// File system resize operation is a global operation for volume,
// so we only need to check it once if more than one pod use it.
return
}
// volumeSpec.ReadOnly is the value that determines if volume could be formatted when being mounted.
// This is the same flag that determines filesystem resizing behaviour for offline resizing and hence
// we should use it here. This value comes from Pod.spec.volumes.persistentVolumeClaim.readOnly.
if volumeSpec.ReadOnly {
// This volume is used as read only by this pod, we don't perform resize for read only volumes.
klog.V(5).Infof("Skip file system resize check for volume %s in pod %s/%s "+
"as the volume is mounted as readonly", podVolume.Name, pod.Namespace, pod.Name)
return
}
if volumeRequiresFSResize(pvc, volumeSpec.PersistentVolume) {
dswp.actualStateOfWorld.MarkFSResizeRequired(uniqueVolumeName, uniquePodName)
}
processedVolumesForFSResize.Insert(string(uniqueVolumeName))
}
// pv.Spec.Capacity大小大于pvc.Status.Capacity时返回true
func volumeRequiresFSResize(pvc *v1.PersistentVolumeClaim, pv *v1.PersistentVolume) bool {
capacity := pvc.Status.Capacity[v1.ResourceStorage]
requested := pv.Spec.Capacity[v1.ResourceStorage]
return requested.Cmp(capacity) > 0
}1.1.2 dswp.findAndRemoveDeletedPods
主要逻辑：
（1）从dswp.desiredStateOfWorld中获取已挂载volume的pod，从podManager获取指定pod是否存在，不存在则再从containerRuntime中查询pod中的容器是否都已terminated，如以上两个条件都符合，则继续往下执行，否则直接返回；
（2）调用dswp.desiredStateOfWorld.DeletePodFromVolume，将pod从dsw.volumesToMount[volumeName].podsToMount[podName]中去除，即将volume挂载到指定pod的信息从desiredStateOfWorld中去除。
// pkg/kubelet/volumemanager/populator/desired_state_of_world_populator.go
// Iterate through all pods in desired state of world, and remove if they no
// longer exist
func (dswp *desiredStateOfWorldPopulator) findAndRemoveDeletedPods() {
var runningPods []*kubecontainer.Pod
runningPodsFetched := false
for _, volumeToMount := range dswp.desiredStateOfWorld.GetVolumesToMount() {
pod, podExists := dswp.podManager.GetPodByUID(volumeToMount.Pod.UID)
if podExists {
// Skip running pods
if !dswp.isPodTerminated(pod) {
continue
}
if dswp.keepTerminatedPodVolumes {
continue
}
}
// Once a pod has been deleted from kubelet pod manager, do not delete
// it immediately from volume manager. Instead, check the kubelet
// containerRuntime to verify that all containers in the pod have been
// terminated.
if !runningPodsFetched {
var getPodsErr error
runningPods, getPodsErr = dswp.kubeContainerRuntime.GetPods(false)
if getPodsErr != nil {
klog.Errorf(
"kubeContainerRuntime.findAndRemoveDeletedPods returned error %v.",
getPodsErr)
continue
}
runningPodsFetched = true
dswp.timeOfLastGetPodStatus = time.Now()
}
runningContainers := false
for _, runningPod := range runningPods {
if runningPod.ID == volumeToMount.Pod.UID {
if len(runningPod.Containers) > 0 {
runningContainers = true
}
break
}
}
if runningContainers {
klog.V(4).Infof(
"Pod %q still has one or more containers in the non-exited state. Therefore, it will not be removed from desired state.",
format.Pod(volumeToMount.Pod))
continue
}
exists, _, _ := dswp.actualStateOfWorld.PodExistsInVolume(volumeToMount.PodName, volumeToMount.VolumeName)
if !exists && podExists {
klog.V(4).Infof(
volumeToMount.GenerateMsgDetailed(fmt.Sprintf("Actual state has not yet has this volume mounted information and pod (%q) still exists in pod manager, skip removing volume from desired state",
format.Pod(volumeToMount.Pod)), ""))
continue
}
klog.V(4).Infof(volumeToMount.GenerateMsgDetailed("Removing volume from desired state", ""))
dswp.desiredStateOfWorld.DeletePodFromVolume(
volumeToMount.PodName, volumeToMount.VolumeName)
dswp.deleteProcessedPod(volumeToMount.PodName)
}
podsWithError := dswp.desiredStateOfWorld.GetPodsWithErrors()
for _, podName := range podsWithError {
if _, podExists := dswp.podManager.GetPodByUID(types.UID(podName)); !podExists {
dswp.desiredStateOfWorld.PopPodErrors(podName)
}
}
}2 vm.reconciler.Run
主要是调用rc.reconcile()，做存储的预期状态和实际状态的协调，负责调整实际状态至预期状态。
dswp.loopSleepDuration的值为100ms。
// pkg/kubelet/volumemanager/reconciler/reconciler.go
func (rc *reconciler) Run(stopCh <-chan struct{}) {
wait.Until(rc.reconciliationLoopFunc(), rc.loopSleepDuration, stopCh)
}
func (rc *reconciler) reconciliationLoopFunc() func() {
return func() {
rc.reconcile()
// Sync the state with the reality once after all existing pods are added to the desired state from all sources.
// Otherwise, the reconstruct process may clean up pods' volumes that are still in use because
// desired state of world does not contain a complete list of pods.
if rc.populatorHasAddedPods() && !rc.StatesHasBeenSynced() {
klog.Infof("Reconciler: start to sync state")
rc.sync()
}
}
}2.1 rc.reconcile
rc.reconcile()主要逻辑：
（1）对于实际已经挂载了的存储，如果期望挂载信息中无该存储，或期望挂载存储的pod列表中没有该pod，则指定pod的指定存储需要unmount（最终调用csi.NodeUnpublishVolume）；
（2）从desiredStateOfWorld中获取需要mount到pod的volome信息列表：
a.当存储未attach到node时：调用方法将存储先attach到node上（此处会判断是不是由kubelet来做attach操作，是则创建VolumeAttachment对象并等待该对象的.status.attached的值为 true，不是则等待AD controller来做attach操作，kubelet将会根据node对象的.Status.VolumesAttached属性来判断该存储是否已attach到node上）；
b.当存储attach后，但未mount给pod或者需要remount时：调用方法进行volume mount（最终调用csi.NodeStageVolume与csi.NodePublishVolume）；
c.当存储需要扩容时，调用方法进行存储扩容（最终调用csi.NodeExpandVolume）；
（3）对比actualStateOfWorld，从desiredStateOfWorld中获取需要detached的volomes（detached意思为把存储从node上解除挂载）：
a.当actualStateOfWorld中表明，某volume没有被任何pod挂载，且desiredStateOfWorld中也不期望该volume被任何pod挂载，且attachedVolume.GloballyMounted属性为true时（device与global mount path的挂载关系还在），会调用到UnmountDevice，主要是调用csi.NodeUnstageVolume解除node上global mount path的存储挂载；
b.当actualStateOfWorld中表明，某volume没有被任何pod挂载，且desiredStateOfWorld中也不存在该volume，且attachedVolume.GloballyMounted属性为false时（已经调用过UnmountDevice，device与global mount path的挂载关系已解除），会调用到UnmountDevice，主要是从etcd中删除VolumeAttachment对象，并等待删除成功。
reconcile()涉及主要方法：
（1）rc.operationExecutor.UnmountVolume：当actualStateOfWorld中表明，pod已经挂载了某volume，但desiredStateOfWorld中期望挂载某volume的pod列表中不存在该pod时（即表明存储已经挂载给pod，但该pod已经不存在了，需要解除该挂载），会调用到UnmountVolume，主要是调用csi.NodeUnpublishVolume将pod mount path解除挂载；
（2）rc.operationExecutor.AttachVolume：当actualStateOfWorld中已经挂载到node节点的volume信息中不存在某volume，但desiredStateOfWorld中期望某volume挂载到node节点上时（即表明需要挂载到node节点的存储未挂载），会调用到AttachVolume，主要是创建VolumeAttachment对象，并等待其.status.attached属性值更新为true；
（3）rc.operationExecutor.MountVolume：当desiredStateOfWorld中期望某volume挂载给某pod，但actualStateOfWorld中表明该volume并没有挂载给该pod，且该volume已经挂载到了node节点上，（或者该pod的volume需要remount），会调用到MountVolume，主要是调用csi.NodeStageVolume将存储挂载到node上的global mount path，调用csi.NodePublishVolume将存储从global mount path挂载到pod mount path；
（4）rc.operationExecutor.ExpandInUseVolume：主要负责在controller端的存储扩容操作完成后，做node端的存储扩容操作（后续会单独分析存储扩容操作）。
（5）rc.operationExecutor.UnmountDevice：当actualStateOfWorld中表明，某volume没有被任何pod挂载，且desiredStateOfWorld中也不期望该volume被任何pod挂载，且attachedVolume.GloballyMounted属性为true时（device与global mount path的挂载关系还在），会调用到UnmountDevice，主要是调用csi.NodeUnstageVolume解除node上global mount path的存储挂载；
（6）rc.operationExecutor.DetachVolume：当actualStateOfWorld中表明，某volume没有被任何pod挂载，且desiredStateOfWorld中也不存在该volume，且attachedVolume.GloballyMounted属性为false时（已经调用过UnmountDevice，device与global mount path的挂载关系已解除），会调用到UnmountDevice，主要是从etcd中删除VolumeAttachment对象，并等待删除成功。
pod挂载存储的调用流程：AttachVolume（csi-attacher.Attach） --> MountVolume（csi-attacher.MountDevice --> csi-mounter.SetUp）
解除pod存储挂载的调用流程：UnmountVolume（csi-mounter.TearDown） --> UnmountDevice（csi-attacher.UnmountDevice） --> DetachVolume（csi-attcher.Detach）
另外说明：controllerAttachDetachEnabled
该参数的值由kubelet启动参数--enable-controller-attach-detach决定，该启动参数设置为 true 表示启用 Attach/Detach controller进行Attach/Detach 操作，同时禁用 kubelet 执行 Attach/Detach 操作（默认值为 true）。对于csi plugin来说，实际上Attach/Detach 操作只是创建/删除VolumeAttachment对象。
// pkg/kubelet/volumemanager/reconciler/reconciler.go
func (rc *reconciler) reconcile() {
// Unmounts are triggered before mounts so that a volume that was
// referenced by a pod that was deleted and is now referenced by another
// pod is unmounted from the first pod before being mounted to the new
// pod.
// 对于实际已经挂载了的存储，如果期望挂载信息中无该存储，或期望挂载存储的pod列表中没有该pod，则指定pod的指定存储需要unmount
// Ensure volumes that should be unmounted are unmounted.
// 从实际挂载信息结构体中获取存储挂载信息
for _, mountedVolume := range rc.actualStateOfWorld.GetMountedVolumes() {
// 判断期望挂载信息结构体中是否存在指定存储挂载到指定pod的信息，如果不存在，则调用rc.operationExecutor.UnmountVolume 从指定pod中unmount掉指定存储
if !rc.desiredStateOfWorld.PodExistsInVolume(mountedVolume.PodName, mountedVolume.VolumeName) {
// Volume is mounted, unmount it
klog.V(5).Infof(mountedVolume.GenerateMsgDetailed("Starting operationExecutor.UnmountVolume", ""))
err := rc.operationExecutor.UnmountVolume(
mountedVolume.MountedVolume, rc.actualStateOfWorld, rc.kubeletPodsDir)
if err != nil &&
!nestedpendingoperations.IsAlreadyExists(err) &&
!exponentialbackoff.IsExponentialBackoff(err) {
// Ignore nestedpendingoperations.IsAlreadyExists and exponentialbackoff.IsExponentialBackoff errors, they are expected.
// Log all other errors.
klog.Errorf(mountedVolume.GenerateErrorDetailed(fmt.Sprintf("operationExecutor.UnmountVolume failed (controllerAttachDetachEnabled %v)", rc.controllerAttachDetachEnabled), err).Error())
}
if err == nil {
klog.Infof(mountedVolume.GenerateMsgDetailed("operationExecutor.UnmountVolume started", ""))
}
}
}
// 从desiredStateOfWorld中获取需要mount到pod的volome信息列表
// Ensure volumes that should be attached/mounted are attached/mounted.
for _, volumeToMount := range rc.desiredStateOfWorld.GetVolumesToMount() {
// 调用rc.actualStateOfWorld.PodExistsInVolume查询指定volume是否已mount到指定pod
volMounted, devicePath, err := rc.actualStateOfWorld.PodExistsInVolume(volumeToMount.PodName, volumeToMount.VolumeName)
volumeToMount.DevicePath = devicePath
// 当存储未attach到node时，调用方法将存储先attach到node上
if cache.IsVolumeNotAttachedError(err) {
// 判断是否是controller来进行Attach/Detach操作
if rc.controllerAttachDetachEnabled || !volumeToMount.PluginIsAttachable {
// Volume is not attached (or doesn't implement attacher), kubelet attach is disabled, wait
// for controller to finish attaching volume.
klog.V(5).Infof(volumeToMount.GenerateMsgDetailed("Starting operationExecutor.VerifyControllerAttachedVolume", ""))
// 如果是controller来进行Attach/Detach操作，则调用VerifyControllerAttachedVolume方法来判断controller是否已经执行完Attach/Detach操作
err := rc.operationExecutor.VerifyControllerAttachedVolume(
volumeToMount.VolumeToMount,
rc.nodeName,
rc.actualStateOfWorld)
if err != nil &&
!nestedpendingoperations.IsAlreadyExists(err) &&
!exponentialbackoff.IsExponentialBackoff(err) {
// Ignore nestedpendingoperations.IsAlreadyExists and exponentialbackoff.IsExponentialBackoff errors, they are expected.
// Log all other errors.
klog.Errorf(volumeToMount.GenerateErrorDetailed(fmt.Sprintf("operationExecutor.VerifyControllerAttachedVolume failed (controllerAttachDetachEnabled %v)", rc.controllerAttachDetachEnabled), err).Error())
}
if err == nil {
klog.Infof(volumeToMount.GenerateMsgDetailed("operationExecutor.VerifyControllerAttachedVolume started", ""))
}
} else {
// Volume is not attached to node, kubelet attach is enabled, volume implements an attacher,
// so attach it
volumeToAttach := operationexecutor.VolumeToAttach{
VolumeName: volumeToMount.VolumeName,
VolumeSpec: volumeToMount.VolumeSpec,
NodeName: rc.nodeName,
}
klog.V(5).Infof(volumeToAttach.GenerateMsgDetailed("Starting operationExecutor.AttachVolume", ""))
err := rc.operationExecutor.AttachVolume(volumeToAttach, rc.actualStateOfWorld)
if err != nil &&
!nestedpendingoperations.IsAlreadyExists(err) &&
!exponentialbackoff.IsExponentialBackoff(err) {
// Ignore nestedpendingoperations.IsAlreadyExists and exponentialbackoff.IsExponentialBackoff errors, they are expected.
// Log all other errors.
klog.Errorf(volumeToMount.GenerateErrorDetailed(fmt.Sprintf("operationExecutor.AttachVolume failed (controllerAttachDetachEnabled %v)", rc.controllerAttachDetachEnabled), err).Error())
}
if err == nil {
klog.Infof(volumeToMount.GenerateMsgDetailed("operationExecutor.AttachVolume started", ""))
}
}
// 当存储attach后，但未mount给pod或者需要remount时，调用方法进行volume mount
} else if !volMounted || cache.IsRemountRequiredError(err) {
// Volume is not mounted, or is already mounted, but requires remounting
remountingLogStr := ""
isRemount := cache.IsRemountRequiredError(err)
if isRemount {
remountingLogStr = "Volume is already mounted to pod, but remount was requested."
}
klog.V(4).Infof(volumeToMount.GenerateMsgDetailed("Starting operationExecutor.MountVolume", remountingLogStr))
err := rc.operationExecutor.MountVolume(
rc.waitForAttachTimeout,
volumeToMount.VolumeToMount,
rc.actualStateOfWorld,
isRemount)
if err != nil &&
!nestedpendingoperations.IsAlreadyExists(err) &&
!exponentialbackoff.IsExponentialBackoff(err) {
// Ignore nestedpendingoperations.IsAlreadyExists and exponentialbackoff.IsExponentialBackoff errors, they are expected.
// Log all other errors.
klog.Errorf(volumeToMount.GenerateErrorDetailed(fmt.Sprintf("operationExecutor.MountVolume failed (controllerAttachDetachEnabled %v)", rc.controllerAttachDetachEnabled), err).Error())
}
if err == nil {
if remountingLogStr == "" {
klog.V(1).Infof(volumeToMount.GenerateMsgDetailed("operationExecutor.MountVolume started", remountingLogStr))
} else {
klog.V(5).Infof(volumeToMount.GenerateMsgDetailed("operationExecutor.MountVolume started", remountingLogStr))
}
}
// 当存储需要扩容时，调用方法进行存储扩容
} else if cache.IsFSResizeRequiredError(err) &&
utilfeature.DefaultFeatureGate.Enabled(features.ExpandInUsePersistentVolumes) {
klog.V(4).Infof(volumeToMount.GenerateMsgDetailed("Starting operationExecutor.ExpandInUseVolume", ""))
err := rc.operationExecutor.ExpandInUseVolume(
volumeToMount.VolumeToMount,
rc.actualStateOfWorld)
if err != nil &&
!nestedpendingoperations.IsAlreadyExists(err) &&
!exponentialbackoff.IsExponentialBackoff(err) {
// Ignore nestedpendingoperations.IsAlreadyExists and exponentialbackoff.IsExponentialBackoff errors, they are expected.
// Log all other errors.
klog.Errorf(volumeToMount.GenerateErrorDetailed("operationExecutor.ExpandInUseVolume failed", err).Error())
}
if err == nil {
klog.V(4).Infof(volumeToMount.GenerateMsgDetailed("operationExecutor.ExpandInUseVolume started", ""))
}
}
}
// 对比actualStateOfWorld，从desiredStateOfWorld中获取需要detached的volomes（detached意思为把存储从node上解除挂载）
// Ensure devices that should be detached/unmounted are detached/unmounted.
for _, attachedVolume := range rc.actualStateOfWorld.GetUnmountedVolumes() {
// Check IsOperationPending to avoid marking a volume as detached if it's in the process of mounting.
if !rc.desiredStateOfWorld.VolumeExists(attachedVolume.VolumeName) &&
!rc.operationExecutor.IsOperationPending(attachedVolume.VolumeName, nestedpendingoperations.EmptyUniquePodName) {
// 当volume已经从node上解除挂载后，GloballyMounted的值被赋值为false
if attachedVolume.GloballyMounted {
// Volume is globally mounted to device, unmount it
klog.V(5).Infof(attachedVolume.GenerateMsgDetailed("Starting operationExecutor.UnmountDevice", ""))
err := rc.operationExecutor.UnmountDevice(
attachedVolume.AttachedVolume, rc.actualStateOfWorld, rc.hostutil)
if err != nil &&
!nestedpendingoperations.IsAlreadyExists(err) &&
!exponentialbackoff.IsExponentialBackoff(err) {
// Ignore nestedpendingoperations.IsAlreadyExists and exponentialbackoff.IsExponentialBackoff errors, they are expected.
// Log all other errors.
klog.Errorf(attachedVolume.GenerateErrorDetailed(fmt.Sprintf("operationExecutor.UnmountDevice failed (controllerAttachDetachEnabled %v)", rc.controllerAttachDetachEnabled), err).Error())
}
if err == nil {
klog.Infof(attachedVolume.GenerateMsgDetailed("operationExecutor.UnmountDevice started", ""))
}
} else {
// Volume is attached to node, detach it
// Kubelet not responsible for detaching or this volume has a non-attachable volume plugin.
if rc.controllerAttachDetachEnabled || !attachedVolume.PluginIsAttachable {
rc.actualStateOfWorld.MarkVolumeAsDetached(attachedVolume.VolumeName, attachedVolume.NodeName)
klog.Infof(attachedVolume.GenerateMsgDetailed("Volume detached", fmt.Sprintf("DevicePath %q", attachedVolume.DevicePath)))
} else {
// Only detach if kubelet detach is enabled
klog.V(5).Infof(attachedVolume.GenerateMsgDetailed("Starting operationExecutor.DetachVolume", ""))
err := rc.operationExecutor.DetachVolume(
attachedVolume.AttachedVolume, false /* verifySafeToDetach */, rc.actualStateOfWorld)
if err != nil &&
!nestedpendingoperations.IsAlreadyExists(err) &&
!exponentialbackoff.IsExponentialBackoff(err) {
// Ignore nestedpendingoperations.IsAlreadyExists && exponentialbackoff.IsExponentialBackoff errors, they are expected.
// Log all other errors.
klog.Errorf(attachedVolume.GenerateErrorDetailed(fmt.Sprintf("operationExecutor.DetachVolume failed (controllerAttachDetachEnabled %v)", rc.controllerAttachDetachEnabled), err).Error())
}
if err == nil {
klog.Infof(attachedVolume.GenerateMsgDetailed("operationExecutor.DetachVolume started", ""))
}
}
}
}
}
}2.1.1 rc.operationExecutor.VerifyControllerAttachedVolume
因为attach/detach操作由AD controller来完成，所以volume manager只能通过node对象来获取指定volume是否已经attach，如已经attach，则更新actualStateOfWorld。
主要逻辑：从node对象中获取.Status.VolumesAttached，从而判断volume是否已经attach，然后更新actualStateOfWorld。
// pkg/volume/util/operationexecutor/operation_executor.go
func (oe *operationExecutor) VerifyControllerAttachedVolume(
volumeToMount VolumeToMount,
nodeName types.NodeName,
actualStateOfWorld ActualStateOfWorldAttacherUpdater) error {
generatedOperations, err :=
oe.operationGenerator.GenerateVerifyControllerAttachedVolumeFunc(volumeToMount, nodeName, actualStateOfWorld)
if err != nil {
return err
}
return oe.pendingOperations.Run(
volumeToMount.VolumeName, "" /* podName */, generatedOperations)
}
func (og *operationGenerator) GenerateVerifyControllerAttachedVolumeFunc(
volumeToMount VolumeToMount,
nodeName types.NodeName,
actualStateOfWorld ActualStateOfWorldAttacherUpdater) (volumetypes.GeneratedOperations, error) {
volumePlugin, err :=
og.volumePluginMgr.FindPluginBySpec(volumeToMount.VolumeSpec)
if err != nil || volumePlugin == nil {
return volumetypes.GeneratedOperations{}, volumeToMount.GenerateErrorDetailed("VerifyControllerAttachedVolume.FindPluginBySpec failed", err)
}
verifyControllerAttachedVolumeFunc := func() (error, error) {
if !volumeToMount.PluginIsAttachable {
// If the volume does not implement the attacher interface, it is
// assumed to be attached and the actual state of the world is
// updated accordingly.
addVolumeNodeErr := actualStateOfWorld.MarkVolumeAsAttached(
volumeToMount.VolumeName, volumeToMount.VolumeSpec, nodeName, "" /* devicePath */)
if addVolumeNodeErr != nil {
// On failure, return error. Caller will log and retry.
return volumeToMount.GenerateError("VerifyControllerAttachedVolume.MarkVolumeAsAttachedByUniqueVolumeName failed", addVolumeNodeErr)
}
return nil, nil
}
if !volumeToMount.ReportedInUse {
// If the given volume has not yet been added to the list of
// VolumesInUse in the node's volume status, do not proceed, return
// error. Caller will log and retry. The node status is updated
// periodically by kubelet, so it may take as much as 10 seconds
// before this clears.
// Issue #28141 to enable on demand status updates.
return volumeToMount.GenerateError("Volume has not been added to the list of VolumesInUse in the node's volume status", nil)
}
// Fetch current node object
node, fetchErr := og.kubeClient.CoreV1().Nodes().Get(string(nodeName), metav1.GetOptions{})
if fetchErr != nil {
// On failure, return error. Caller will log and retry.
return volumeToMount.GenerateError("VerifyControllerAttachedVolume failed fetching node from API server", fetchErr)
}
if node == nil {
// On failure, return error. Caller will log and retry.
return volumeToMount.GenerateError(
"VerifyControllerAttachedVolume failed",
fmt.Errorf("Node object retrieved from API server is nil"))
}
for _, attachedVolume := range node.Status.VolumesAttached {
if attachedVolume.Name == volumeToMount.VolumeName {
addVolumeNodeErr := actualStateOfWorld.MarkVolumeAsAttached(
v1.UniqueVolumeName(""), volumeToMount.VolumeSpec, nodeName, attachedVolume.DevicePath)
klog.Infof(volumeToMount.GenerateMsgDetailed("Controller attach succeeded", fmt.Sprintf("device path: %q", attachedVolume.DevicePath)))
if addVolumeNodeErr != nil {
// On failure, return error. Caller will log and retry.
return volumeToMount.GenerateError("VerifyControllerAttachedVolume.MarkVolumeAsAttached failed", addVolumeNodeErr)
}
return nil, nil
}
}
// Volume not attached, return error. Caller will log and retry.
return volumeToMount.GenerateError("Volume not attached according to node status", nil)
}
return volumetypes.GeneratedOperations{
OperationName: "verify_controller_attached_volume",
OperationFunc: verifyControllerAttachedVolumeFunc,
CompleteFunc: util.OperationCompleteHook(util.GetFullQualifiedPluginNameForVolume(volumePlugin.GetPluginName(), volumeToMount.VolumeSpec), "verify_controller_attached_volume"),
EventRecorderFunc: nil, // nil because we do not want to generate event on error
}, nil
}2.2 rc.sync()
rc.sync()调用时机：在vm.desiredStateOfWorldPopulator.Run中已经将所有pod的volume信息更新到了desiredStateOfWorld中。
rc.sync()主要逻辑：扫描node上所有pod目录下的volume目录，来更新desiredStateOfWorld与actualStateOfWorld。
// pkg/kubelet/volumemanager/reconciler/reconciler.go
func (rc *reconciler) reconciliationLoopFunc() func() {
return func() {
rc.reconcile()
// Sync the state with the reality once after all existing pods are added to the desired state from all sources.
// Otherwise, the reconstruct process may clean up pods' volumes that are still in use because
// desired state of world does not contain a complete list of pods.
if rc.populatorHasAddedPods() && !rc.StatesHasBeenSynced() {
klog.Infof("Reconciler: start to sync state")
rc.sync()
}
}
}
// pkg/kubelet/volumemanager/reconciler/reconciler.go
// sync process tries to observe the real world by scanning all pods' volume directories from the disk.
// If the actual and desired state of worlds are not consistent with the observed world, it means that some
// mounted volumes are left out probably during kubelet restart. This process will reconstruct
// the volumes and update the actual and desired states. For the volumes that cannot support reconstruction,
// it will try to clean up the mount paths with operation executor.
func (rc *reconciler) sync() {
defer rc.updateLastSyncTime()
rc.syncStates()
}
// syncStates scans the volume directories under the given pod directory.
// If the volume is not in desired state of world, this function will reconstruct
// the volume related information and put it in both the actual and desired state of worlds.
// For some volume plugins that cannot support reconstruction, it will clean up the existing
// mount points since the volume is no long needed (removed from desired state)
func (rc *reconciler) syncStates() {
// Get volumes information by reading the pod's directory
podVolumes, err := getVolumesFromPodDir(rc.kubeletPodsDir)
if err != nil {
klog.Errorf("Cannot get volumes from disk %v", err)
return
}
volumesNeedUpdate := make(map[v1.UniqueVolumeName]*reconstructedVolume)
volumeNeedReport := []v1.UniqueVolumeName{}
for _, volume := range podVolumes {
if rc.actualStateOfWorld.VolumeExistsWithSpecName(volume.podName, volume.volumeSpecName) {
klog.V(4).Infof("Volume exists in actual state (volume.SpecName %s, pod.UID %s), skip cleaning up mounts", volume.volumeSpecName, volume.podName)
// There is nothing to reconstruct
continue
}
volumeInDSW := rc.desiredStateOfWorld.VolumeExistsWithSpecName(volume.podName, volume.volumeSpecName)
reconstructedVolume, err := rc.reconstructVolume(volume)
if err != nil {
if volumeInDSW {
// Some pod needs the volume, don't clean it up and hope that
// reconcile() calls SetUp and reconstructs the volume in ASW.
klog.V(4).Infof("Volume exists in desired state (volume.SpecName %s, pod.UID %s), skip cleaning up mounts", volume.volumeSpecName, volume.podName)
continue
}
// No pod needs the volume.
klog.Warningf("Could not construct volume information, cleanup the mounts. (pod.UID %s, volume.SpecName %s): %v", volume.podName, volume.volumeSpecName, err)
rc.cleanupMounts(volume)
continue
}
if volumeInDSW {
// Some pod needs the volume. And it exists on disk. Some previous
// kubelet must have created the directory, therefore it must have
// reported the volume as in use. Mark the volume as in use also in
// this new kubelet so reconcile() calls SetUp and re-mounts the
// volume if it's necessary.
volumeNeedReport = append(volumeNeedReport, reconstructedVolume.volumeName)
klog.V(4).Infof("Volume exists in desired state (volume.SpecName %s, pod.UID %s), marking as InUse", volume.volumeSpecName, volume.podName)
continue
}
// There is no pod that uses the volume.
if rc.operationExecutor.IsOperationPending(reconstructedVolume.volumeName, nestedpendingoperations.EmptyUniquePodName) {
klog.Warning("Volume is in pending operation, skip cleaning up mounts")
}
klog.V(2).Infof(
"Reconciler sync states: could not find pod information in desired state, update it in actual state: %+v",
reconstructedVolume)
volumesNeedUpdate[reconstructedVolume.volumeName] = reconstructedVolume
}
if len(volumesNeedUpdate) > 0 {
if err = rc.updateStates(volumesNeedUpdate); err != nil {
klog.Errorf("Error occurred during reconstruct volume from disk: %v", err)
}
}
if len(volumeNeedReport) > 0 {
rc.desiredStateOfWorld.MarkVolumesReportedInUse(volumeNeedReport)
}
}volume manager作用
volume manager存在于kubelet中，主要是管理卷的attach/detach（与AD controller作用相同，通过kubelet启动参数控制哪个组件来做该操作，后续会详细介绍）、mount/umount等操作。
volume manager中pod挂载存储的调用流程
AttachVolume（csi-attacher.Attach） --> MountVolume（csi-attacher.MountDevice --> csi-mounter.SetUp）
volume manager中解除pod存储挂载的调用流程
UnmountVolume（csi-mounter.TearDown） --> UnmountDevice（csi-attacher.UnmountDevice） --> DetachVolume（csi-attcher.Detach）
volume manager的vm.reconciler.Run中各个方法的调用链
（1）AttachVolume
Volume is not attached to node, kubelet attach is enabled
vm.reconciler.Run --> rc.operationExecutor.AttachVolume --> oe.operationGenerator.GenerateAttachVolumeFunc --> csi-attacher.Attach（pkg/volume/csi/csi_attacher.go）--> create VolumeAttachment
（2）MountVolume
Volume is not mounted, or is already mounted, but requires remounting
vm.reconciler.Run --> rc.operationExecutor.MountVolume --> oe.operationGenerator.GenerateMountVolumeFunc --> 1.csi-attacer.WaitForAttach（等待VolumeAttachment的.status.attached属性值更新为true） 2.csi-attacer.MountDevice（--
csi.NodeStageVolume） 3.csi-mounter.SetUp（-->csi.NodePublishVolume）
（3）ExpandInUseVolume
Volume is mounted， but it needs to resize
vm.reconciler.Run --> rc.operationExecutor.ExpandInUseVolume --> oe.operationGenerator.GenerateExpandInUseVolumeFunc --> og.doOnlineExpansion --> og.nodeExpandVolume --> expander.NodeExpand (pkg/volume/csi/expander.go) --> csi.NodeExpandVolume
（4）UnmountVolume
Volume is mounted, unmount it
vm.reconciler.Run --> rc.operationExecutor.UnmountVolume --> oe.operationGenerator.GenerateUnmountVolumeFunc --> csi-mounter.TearDown（pkg/volume/csi/csi_mounter.go）--> csi.NodeUnpublishVolume
（5）UnmountDevice
Volume is globally mounted to device, unmount it
vm.reconciler.Run --> rc.operationExecutor.UnmountDevice --> oe.operationGenerator.GenerateUnmountVolumeFunc --> csi-attacher.UnmountDevice --> csi.NodeUnstageVolume
（6）DetachVolume
Volume is attached to node, detach it
vm.reconciler.Run --> rc.operationExecutor.DetachVolume --> oe.operationGenerator.GenerateDetachVolumeFunc --> csi-attacher.Detach --> delete VolumeAttachment
手机扫一扫
移动阅读更方便
你可能感兴趣的文章